March
20-01-2004, 21:31
Hallo liebe Supportfreunde!
ich möchte mich mal bedanken, dass es sowas wie TS gibt.. was wirklich perfekt ist.
,+So jetzt zu meinem Problem
Ich bin ein kleiner Helfer bei einem Freund.
arbeite mit remoteprogramm, da er ein kleiner noob ist..
+TS ging bis zu dem Tage andem er MS Netmeeting konfigurierte..
Wir hatten dann mal Konferenz mit Netmeeting und seitdem geht aber das Mikro bei Teamspeak nicht mehr.
Hab mir diverse Einstellungen angesehen ..
+Mixer von Windows mixer von software der Soundkarte.. hab aber alles so eingestellt wie im FAQ.
+hab auch den Rauschen thread gelesen.. bringt mir aber nix. weils das mikro gar nicht geht.. er hört uns aber wenn er sprechen will leuchtet das grüne lämpchen nicht.
der local test geht auch nicht..
es hängt sicher mit dem Netmeeting zusammen nur ich hab leider keinen Plan was man dagegen machen kann.
Bei mir ging das Mikro nach ein und aussteigen von TS wieder .
+ die audioaufnahme mit windowsxp geht..
+ Soundkarte Audiomax onboard
+ headset richtig eingesteckt
+ teamspeak gamevoice wollen nit gehen.. (d.h. das mikro suckt)
was kanns noch haben..
ich benutze TS ein jahr. d.h. die 0/8/15 einstellung sind es nicht..
danke für eure Mühen
mfg
Mario
anbei die TS log
20-01-04 22:15:07,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:25:04,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:30:11,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:33:43,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:34:37,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:34:37,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:35:01,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:43:28,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:46:44,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:46:53,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:49:29,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
* TeamSpeak Version (Vollständiger String: 2.0.32.60)
* WinXP
* AudioMax
* DirectX Version 9a
ich möchte mich mal bedanken, dass es sowas wie TS gibt.. was wirklich perfekt ist.
,+So jetzt zu meinem Problem
Ich bin ein kleiner Helfer bei einem Freund.
arbeite mit remoteprogramm, da er ein kleiner noob ist..
+TS ging bis zu dem Tage andem er MS Netmeeting konfigurierte..
Wir hatten dann mal Konferenz mit Netmeeting und seitdem geht aber das Mikro bei Teamspeak nicht mehr.
Hab mir diverse Einstellungen angesehen ..
+Mixer von Windows mixer von software der Soundkarte.. hab aber alles so eingestellt wie im FAQ.
+hab auch den Rauschen thread gelesen.. bringt mir aber nix. weils das mikro gar nicht geht.. er hört uns aber wenn er sprechen will leuchtet das grüne lämpchen nicht.
der local test geht auch nicht..
es hängt sicher mit dem Netmeeting zusammen nur ich hab leider keinen Plan was man dagegen machen kann.
Bei mir ging das Mikro nach ein und aussteigen von TS wieder .
+ die audioaufnahme mit windowsxp geht..
+ Soundkarte Audiomax onboard
+ headset richtig eingesteckt
+ teamspeak gamevoice wollen nit gehen.. (d.h. das mikro suckt)
was kanns noch haben..
ich benutze TS ein jahr. d.h. die 0/8/15 einstellung sind es nicht..
danke für eure Mühen
mfg
Mario
anbei die TS log
20-01-04 22:15:07,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:25:04,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:30:11,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:33:43,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:34:37,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:34:37,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:35:01,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:43:28,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:46:44,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:46:53,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
20-01-04 22:49:29,2552,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
* TeamSpeak Version (Vollständiger String: 2.0.32.60)
* WinXP
* AudioMax
* DirectX Version 9a