ts2 getting through zonealarm

[Marky_Mark]

any help appreciated
cant get ts to work when zone alarm is running
its in ZA as a trusted program and configured to let connections in and out
i have a public address so there is no NAT going on
and no proxying

[Panther3D]

In order to work, make sure ZA is set to Medium for Internet Zone Security. I don't remember wich version of ZA, but starting with version X, setting it to high would make TS stop working.

Setting it to Medium will not make you invisible anymore, but protected.

I hope it help!

[guldi]

by the way, the ports required by TS are mentioned in the FAQ section !

[Marky_Mark]

thanks will give it a go

[-[BBD]-MotherFo]

Search for the posts made by me i did one on zonealarm 4.5 the newest version it is possible to leave ur firewall on high and still get it to show up if you follow my steps its fairly easy do a search on my name and you will fnd one on ZA 4.5 this way ur getting full firewall protecton and u dont need to lower it every time you host please use the search engine more as the makers dont like people ot reading the rules

[EFG_Zeb]

I've setup ZA Pro 3.0 for the ports as in thez FAQ

My client is recent ( 2.0.32.60) and the server is recent too (last version)

Here are my ZA settings:
http://perso.wanadoo.fr/sebfly100/efg/zatssettings.jpg

But I still get a "Got a bad resonse from the server"...

What can I do??

Of course if I shut down ZA, I can access that same server with no problems...

[-[BBD]-MotherFo]

make sure in your programs list that both the server and the client have green checks across the board allowing them for everything lower ur settings to medium I recommend buying the new version as it is about 20$ at some stores and since yours is a bit old I cant really help you www.download.com will get you the regular version. 4.5 i suggest that contact me if you get the new one I can send u a screeny of what you need to do