Wish List

[Andy King]

Hi All,
First I would like to congratulate TeamSpeak on a totally brilliant voice program. I have used RogerWilco for years withing a Flight Simming Community and the only thing I will be using it for now is for doing ATC (Air traffic Control) and that's only because I have to.

I have a few things I would like to see implemented into the full version.

With an un-passworded server at the moment Guests can enter the server and go to any room they wish thats not passworded running amok. Would it be possible to add another FLAG to the Create Rooms window where you can specify Guests are allowed but if the Room is the default one then the Guests checkbox is ticked but greyed out so it cannot be removed. I thing this will help Server Owners open up more servers to the public and new users. When a guest enters then a SystemAdmin would go chat to him find out who it is the either give registration permission or let them continue as a Guest.

My second wish is that when your running an unpasworded server and allowing Guests in and perhaps a paticular Guest starts ruining others fun then you obviously kick the person. This person can then rejoin as many times as they like. Would it be possible to implememnt a lock for non passworded servers, when you kick this troublesome Guest you then lock the server by menu or keybind which stops any un-registered persons onto the server. After a while you could open it up again. This would also help with limiting lag because you could close the server to Non Members guaranteeing you on get at tops the number of people registered.

When you connect to a server you see all channels even sub-channels which can make the window veeerrrryyyy long, can you have a Flag in Options to stop this please.

Can we have more flexabilty with registered users. So ServerAdmins can say add pivileges like, User can create non permanent channels, User can password non permanent, User can only whisper other users in same room, User can whiper to all users in any room, etc etc meaning trusted members get privileges added as you get to know them better ending as an Admin.

Please stop SystemAdmins being able to remove other SystemAdmins SA Status, especially the SSA (SuperSystemAdmin) I was caught out by this unintentionally by a SystenAdmin on my Server. That should not be able to happen.

Please add Mic Output Level Adjustment with maybe a Meter showing optimal settings for microphone. If the meter has say Yellow, Green and Red area and you set you mic up so that needle is in Green area then all users would be roughly the same and more readable. Also this could be used to test microphone is working from headset to TeamSpeak.

Whispers are a pain, as in if your in the same room as a player whispering you canot tell if its a whisper or a transmission to the room. Would it be possible to have a tone at the beggining and end of a whisper so even if you do not have the TeamSpeak window open you can tell its a whisper, perhaps a yellow light from the person whispering also as a visual aid, would aid whispers.

Gonna stop there as this is getting a bit long. I hope these suggestions are useful and thanks for a brillint program.

Flight Simming Online (http://www.hawarden.org.uk)

[jrockit]

I agree with the above post. I would also like to add /suggest a checkmark next to each menu setting that is a switch, so you can tell if it is active or inactive. Alternatively, clearer icons for the mute settings. Icons never make sense, but it would be nicer to differentiate these a bit more. Thank you. :)

It's a wonderful program. Beats the pants off Roger Wilco.... (when it's running smoothly)

And i love the voice, she sounds hot for a robot. LOL, :rolleyes:

[FloorPie]

And i love the voice, she sounds hot for a robot. LOL, :rolleyes:
Me too.

A member in our clan might be able to create a similar batch of sexy voices. If he does, I'll post the URL somewhere. :D

[N. Werensteijn]

Originally posted by Andy King
Hi All,
First I would like to congratulate TeamSpeak on a totally brilliant voice program. I have used RogerWilco for years withing a Flight Simming Community and the only thing I will be using it for now is for doing ATC (Air traffic Control) and that's only because I have to.thanks

I have a few things I would like to see implemented into the full version.

With an un-passworded server at the moment Guests can enter the server and go to any room they wish thats not passworded running amok. Would it be possible to add another FLAG to the Create Rooms window where you can specify Guests are allowed but if the Room is the default one then the Guests checkbox is ticked but greyed out so it cannot be removed. I thing this will help Server Owners open up more servers to the public and new users. When a guest enters then a SystemAdmin would go chat to him find out who it is the either give registration permission or let them continue as a Guest.

Let me summurize. You want Guests to stop crating channels?
Thats a good idea. Maybe we can make a setting for the server called "Registerred players can create channels".
We already have a flag so that only server admins can create channels.

My second wish is that when your running an unpasworded server and allowing Guests in and perhaps a paticular Guest starts ruining others fun then you obviously kick the person. This person can then rejoin as many times as they like. Would it be possible to implememnt a lock for non passworded servers, when you kick this troublesome Guest you then lock the server by menu or keybind which stops any un-registered persons onto the server. After a while you could open it up again. This would also help with limiting lag because you could close the server to Non Members guaranteeing you on get at tops the number of people registered.
A ban function, banning a ip for a few minutes - hours - infinate would be better?

When you connect to a server you see all channels even sub-channels which can make the window veeerrrryyyy long, can you have a Flag in Options to stop this please.
How else would you want to find the channels?
You can set the server into public mode. This will hide all players except the one in you channel.

Can we have more flexabilty with registered users. So ServerAdmins can say add pivileges like, User can create non permanent channels, User can password non permanent, User can only whisper other users in same room, User can whiper to all users in any room, etc etc meaning trusted members get privileges added as you get to know them better ending as an Admin.
Not at this moment. Most what you ask for here can be achived by setting the correct settings on your server.

Please stop SystemAdmins being able to remove other SystemAdmins SA Status, especially the SSA (SuperSystemAdmin) I was caught out by this unintentionally by a SystenAdmin on my Server. That should not be able to happen.
hehe Foolproof proved false by fools :) Will add!

Please add Mic Output Level Adjustment with maybe a Meter showing optimal settings for microphone. If the meter has say Yellow, Green and Red area and you set you mic up so that needle is in Green area then all users would be roughly the same and more readable. Also this could be used to test microphone is working from headset to TeamSpeak.
Yea im still thinking about how to do that (issues with direct sound and mixer. never mind, this is being worked on)
Whispers are a pain, as in if your in the same room as a player whispering you canot tell if its a whisper or a transmission to the room. Would it be possible to have a tone at the beggining and end of a whisper so even if you do not have the TeamSpeak window open you can tell its a whisper, perhaps a yellow light from the person whispering also as a visual aid, would aid whispers. Maybe :)

Gonna stop there as this is getting a bit long. I hope these suggestions are useful and thanks for a brillint program.

Flight Simming Online (http://www.hawarden.org.uk)

[Andy King]

quote:
When you connect to a server you see all channels even sub-channels which can make the window veeerrrryyyy long, can you have a Flag in Options to stop this please.
--------------------------------------------------------------------------------
Hi, thanks for your response.

When you connect to a server I would like to see all the channels not expanded upon connection. My server has about 12 main channels with sub channels in about 50% of the Channels. So when I connect to the server and it displays every channel the list is massive even without users connected. Can we have an option in Options that on connection the Channels are closed so you cannot see the sub channels making the list of Channels smaller upon connection.

A ban function on IP Address' is not full proof as lots use dynamic IP's (UK) So a lock function would be better all around. Kick the user then shut the server with the lock method. This also means you could remove a registered users registration and then kick them and lock the server. This would also stop Guests entering but that cannot be helped. I am trying to run an unpassworded server so that Guests can come along and join. We need Guests to have restricted access without having to password all rooms. Maybe an extra FLAG on Create Room Menu with Allow Guest as its title. Tick the FLAG if Guests are allowed. Meaning a Guest could enter the default room but could not access any other room that doesn't have the Guest FLAG checked restricting there access. Then they could ask a SystemAdmin for registration rights and if accepted register and have full use.

Thanks for your time.

[N. Werensteijn]

Originally posted by Andy King
When you connect to a server I would like to see all the channels not expanded upon connection. My server has about 12 main channels with sub channels in about 50% of the Channels. So when I connect to the server and it displays every channel the list is massive even without users connected. Can we have an option in Options that on connection the Channels are closed so you cannot see the sub channels making the list of Channels smaller upon connection.
Point taken. Ill make some option for that in the options dialog or connection dialog
A ban function on IP Address' is not full proof as lots use dynamic IP's (UK) So a lock function would be better all around. Kick the user then shut the server with the lock method. This also means you could remove a registered users registration and then kick them and lock the server. This would also stop Guests entering but that cannot be helped.
The ban is not intendid for "forever" but just for an hour or so (user settable). This means u can still let other guests enter while locking the 1 evil-doer out. and if that guy gets a new ip every time he connects, lets see who gets more tired first. You banning him with 2 clicks, or him having to reconnect to internet all the time.

I am trying to run an unpassworded server so that Guests can come along and join. We need Guests to have restricted access without having to password all rooms. Maybe an extra FLAG on Create Room Menu with Allow Guest as its title. Tick the FLAG if Guests are allowed. Meaning a Guest could enter the default room but could not access any other room that doesn't have the Guest FLAG checked restricting there access. Then they could ask a SystemAdmin for registration rights and if accepted register and have full use.
This actually makes a litle sence :p
Ill discuss it with Ralf
Thanks for your time.
And thanks for yours