Nobody can see or connect to my server

[ericdrum]

Here's my config, I have a static IP with and Actiontec DSL router sitting in front of my Netgear wireless router. The Netgear goes into my PC. My static IP is 240.208.xxx.xx. The LAN IP for the Actiontec is 192.168.0.1. The port forwarding is set up to forward port 8767 to 192.168.0.2. The WAN IP for the Netgear is 192.168.0.2 and the LAN IP is 192.168.1.1. The port forwarding is set up to forward port 8767 to 192.168.1.3. 192.168.1.3 is the IP of my PC. Is this set up correctly. I don't have the WinXP firewall turned on or anything. Can someone help this noob? Thanks.

[fulcrum]

I have the exact same problem...could anyone help pleeeeease :)

[guldi]

do I understand you correct, you have two routers in line (both doing NAT) ? I would say in theory - if your forwardings are correct - this should work.
Have you ever tried hanging your TS server right after the Actiontec router ?

[groshg]

i have same peoblem can someone plz help

[Andrew]

I have the Same Problem. I have both a DSL modem And a linksys Router.
HELP!!!!!!!:confused:

[WolfStar76]

You all need to read the Forum Rules, and the FAQ.

Forum Rules: http://forum.goteamspeak.com/announcement.php?f=2
FAQ: http://www.goteamspeak.com/?page=faq

What to look for:
* Proper Forums to post in (Support, not General).
* How to SEARCH
* Firewall rules
* NAT and/or LAN vs WAN IP addresses.

Go forth, and be educated.

[Conman5]

Why dont u people just use one router. then u wouldn't need to ask these questions.

[nickill2]

ok now do u have a firewall at all. case the firewall will make a big diff.