PDA

View Full Version : Help!

gijoe
31-05-2004, 16:44
My TS server is only leting me join and when i run he server it say there are to ips when i conect to one i connec tot server but when i connect tot he other is sas error and on the master list it has the ip that says error waht do i do?
gijoe
31-05-2004, 16:52
The settings are like
Server Settings Overview

General
ServerName: ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
ServerUDPPort: 8767
ServerId: 1
ServerVersion: 2.0.20.1

ServerPassword:
ServerWelcomeMessage: Welcome to -GR-Clan TeamSpeak'
ServerWebPostLinkURL:

Statistics
ServerUpTime: 00:29:06
CurrentChannels: 1
CurrentUsers: 0 / 16

ServerPacketsSend: 1353
ServerBytesSend: 61865
ServerPacketsReceived: 1211
ServerBytesReceived: 29199

Bandwitdh In [Bytes/sec] 0
Bandwitdh In [Bytes/min]: 0
Bandwitdh Out [Bytes/sec]: 0
Bandwitdh Out [Bytes/min]: 0


Wehn i connect to one ip i get into the serer but when i connect tot the one on the master list is says error server offline
Germeshausen.de
31-05-2004, 17:24
You cannot connect to your local teamspeak 2 server with the wan ip. Your need to join via lan ip or localhost if the server runs the same machine. Your guest need to join from the internet with the wan ip.

btw: your are using version 2 and not version 1. you are in the wrong part of the forum

Greetz Crow
gijoe
31-05-2004, 17:51
But i have had them to connect though both and it dont work
Germeshausen.de
31-05-2004, 18:08
No. You have two IPs. One internal (you lan IP) and one external (your wan IP). You're not able to connect from your local network to your local teamspeak with a wan ip. only with the lan ip. The users who come from the internet need to use your wan ip.

Else it's not working.

Short: Internal users use the internal ip - external the external one
gijoe
31-05-2004, 22:24
It's still not working?