It only lets me log on my server through my internal ip

[ike]

well i had one of these before and i got it to work but i cant now it will only take my interanl ip and wont let me log in thorugh my exteranl ip any solutions

09:58:59] Connecting to 12.177.13.85:8767
[09:59:03] No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it

i get this error and i have my server running

[guldi]

router limitation. Many router do not allow to use the WAN IP to connect from witzhin the LAN => within the LAN ONLY use the LAN IP

[ike]

router limitation. Many router do not allow to use the WAN IP to connect from witzhin the LAN => within the LAN ONLY use the LAN IP
how i find lan ip

[SidewinderX]

do this

start => run => Type in 'cmd' with out the qoutes

from there type in 'ipconfig' again with out the quotes

and that should give you your ip address

[SidewinderX]

once that is done assuming you have a linksys router do the following

- Go to http:192.168.1.1

- Log In

- Go to Advanced

- Click DMZ host

- Set your DMZ host that ip you saw when you did ipconfig
(the ip should look something like 192.168.1.101)
Once this is done you should have no trobell joining using the external ip address

Hope All works

[GeoffM]

Questions;

a) Type of Connection
b) Do you use a router
c)is it (The router) Configureable

If you have a dial-up or direct broadband you could try a dynanic dns service (use google search) and a mini auto dyn linking program like Dynsite for windows

If you use a nonconfigureable Router see the above

if you have a configurable router you may need to go into the utility for the router (either Telnet or by it's internal web see your Router's documentation)
Find and configure Port forwarding to the IP of your server (in this case according to your post 192.168.1.1) the Ports you'll need to forward are listed in the fourms

I hope this helps

[m&m's]

once that is done assuming you have a linksys router do the following

- Go to http:192.168.1.1

- Log In

- Go to Advanced

- Click DMZ host

- Set your DMZ host that ip you saw when you did ipconfig
(the ip should look something like 192.168.1.101)
Once this is done you should have no trobell joining using the external ip address

Hope All works

not a good idea to use DMZ it leaves your whole computer open to hackers and you only need to open port 8767 in port fowarding in the router for ts !