Router Problem..People Cant Join!

[sowdylan]

Hi. :confused: Well no one can join my server because its only the ip for my home network. Can anyone give me step by step instructions. I am not a "genus" so please keep in simple.

Please Reply ASAP

~Dylan

[m&m's]

http://www.xbchelp.com/router/ has a list of routers and walk thru's dont use the port they say but use port 8767 udp in your port fowarding

[Corrupted1]

Ok this may or may not help. You need to get into your router and open up the port for ts. First you need to goto a cmd prompt goto start run and type cmd then when you get to the big black box type ipconfig. If you are behind a router you should have an ip of like 192.168.0. somethin. Now you need to get to your router login page so open up ie and type in the address line 192.168.0.1 or 192.168.1.1 I think then you will be at the login page for it if your are the admin of this router you will need the pass to get in . After you are in goto your port set up then you will have to open the port for TS and direct it to your pc ip the one you got from the cmd prompt the 192.168.0. what ever. After you set that up you will have to reboot your router for the changes to take affect. Hope this helps let me know.

[Witte]

I've got the same problem. I opened the port 8767 but still he can't find the server. My server is online because when I filter the list I found it. My router is a Speedtouch 510. I'm not sure if this is the problem.

Hope somebody can help us.

Regards, Witte


:) :) Everything is working fine now :) :)
Don't ask me what I did because I don't know :confused: