Cannot connect thew WAN address. NR041 Router

[|W|o|R|]

I am running the latest version of tss. Setup went fine, i can connect thew the local ip (192.168.1.3) but not my exterior address. The server is only showing the local address and not the exterior address also. I have looked thew every faq on the routers and i had it setup the right way from the start but it still doesnt work. Here is what i get from my client:

(Connecting thew 192.168.1.3)

[17:14:27] Connecting to 192.168.1.3
[17:14:27] Connected to server TeamSpeak Server
[17:14:27] [Welcome to TeamSpeak, check www.teamspeak.org]

-------------------------------------------------------------
(Connecting 68.???.???.???)

[17:15:39] Connecting to 68.103.118.233
[17:15:39] Connected to server TeamSpeak Server
[17:15:39] [Welcome to TeamSpeak, check www.teamspeak.org]
[17:15:41] Connection timed out
-------------------------------------------------------------

So it looks as though it connects for 2 seconds, but i never see any of the rooms or myself showing up in the left hand side, nor do i see the server info on the right.

I have port 8767UDP forwarded to the servers local ip. Ive tried setting it as the DMZ host, no good.. I have DHCP disabled, nothing seems to work.

Any help would be greatly appriciated.

[McAfee]

Most routers get confused when you do a loopback with the WAN ip. Some people call this a bug (or lack of proper functionality), others call it a feature of the router.

[|W|o|R|]

Not exactly sure what you mean by loopback, but i can get ftp,http, and a few other servers to work fine over this router, ive never had any problems with any type of server except teamspeak. So i cant do anything about it? Can you be more detailed?

[McAfee]

When you try to connect to yourself it's called a loopback. Some routers will not allow you to connect to yourself using your WAN address. The packets are lost internally.

[m&m's]

loopback address is 127.0.0.1 place this as your ip in the client as log as the server is loaded same pc , or the lan ip a 192.x.x.x or 10.x.x.x # to conect to a pc same lan

[wraith33]

I have the same router. To get it to work I had to disable block wan request under filters and under view port range forwarding I have 8766-8768 for the ports. If you have any questions just PM me