Instructions to set up TeamSpeak 2.0 client and server

[{nUg}DankRider]

Since I know i wanted some sort of instructions to install Team Speak and couldnt find any, i deceded to create my own.. I hope someone finds them usefull..:o

-= Team Speak 2.0 =- Client Setup/connect

These Steps will help you install, setup, connect to a favorite server, and register. If a guest password is required to access the server you must attain one from the server admin.

1 - Download/Install - Team Speak 2.0 Client
- http://www.goteamspeak.com/

2 - Start your Team Speak 2.0 client

3 - Setting up your Team Speak 2.0 Options
- Go to your Setting folder
- click (Options / Sound Devices) Make sure you have the right sound device selected
- click (Options / Other) Set your default guest nickname
- click (Options / soundinput/output) Set your talk button,
- Run the (active locate test mode)

4 - Connecting to a Server as a Guest, and saving our server in your addressbook
- Click (Connection/Connect) Select (Web Servers List) Locate and Highlight your desired server
then Select (Copy to local Addressbook)
- Click on the (Local Addressbook) tab
- You should see the server's info on the right hand side of the window, with your guest Nickname.
- Select Auto-Reconnect
- Select (Anonymous)
- Enter our password and connect

5 - Registering to our server, Steps to register. (You can register to a Team Speak server to chat in registered channels)
- click Self/Register With Server, enter your Login Name and password, then click register.
This will be your personal log and pass to the server.

6 - Connecting to the server using your personal Log Name and password
- Disconnect from the server
- Click Connections/Connect/Local Addressbook
- Select ( Registered )
- Enter your Personal Login Name and Password
- Connect to the Server

7 - You are done!!

---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------

-= Team Speak 2.0 =- Server Setup

1 - Download/Install - Team Speak 2.0 Server
- http://www.goteamspeak.com/

2 - Start Team Speak 2.0 Server

3 - Registering Your Team Speak Server
- Start Team Speak 2.0
- Locate and open your Server log file using Word Pad
(c:/Program files/Teamspeak2/server)
- Locate your Login and password
- sample ( LoginName: admin LoginPW: bmjk3 )
- Right Click on the Team Speak 2.0 server icon in your tray and select ( Administration )
- You will be prompted to enter the login and pass you just retrieved from your Servers log file.
enter your info and save

4 - Navigating and Setting up Team Speak 2.0 while in the Web Browser
- Select your server
Users Manager
- click User Manager, then click on the tool button to the right of the admin
- Type in a new admin password in both the fields
- make sure you have selected both Server Admin & Super Server Admin
- Then click Save. A web browser Login/Password box will pop up, enter your new info and hit remember password then save.
- NOTE: you will also use the (User Manager) to edit your registered guests..
You can make a registered guest a Server admin or Super Server Admin without changing their password by leaving it blank
(to register a client view the client setup portion of this post. Steps 4-6 in the Client setup portion)
Setting
- Click Settings
- Modify these server settings per your needs
- server name
- server welcome message
- Server Type, (clan/public) server
- Player registration Mode
- Type of Codec's to be allowed
- Save settings

5 - Connecting to your Team Speak 2.0 server as a Admin
- Install and Start Team Speak 2.0 (Steps are listed in the Client Setup portion on this post,, Sections 1-3)
- Click (Connection/Connect) Select (Web Servers List) Locate and Highlight your server, then Select (Copy to local Addressbook)
- Click on the (Local Addressbook) tab
- You should see your server's info on the right hand side of the window, with your guest Nickname.
- Select Auto-Reconnect
- Select ( Registered )
- Enter your Personal Login Name and Password
- Connect to the Server

6 - Tip on Creating Channels and Sub-Channels
- You must select a channel type for the channel to stay.
- Registered = Permanent Channel that will stay on the server till deleted.
- Moderated = You need voice or better to talk.
- Sub Channels = Selecting this will allow you to create Sub-Channels in that parent Channel
- Default = This is the channel the members will automatically join
- To create a Sub-Channel, your parent Channel must have the Sub-Channel box selected upon creation

---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------

-=Common Server Questions=-

Q - What is the difference between a Admin and a Super Admin?
- Super Server Admins - administrate all the servers on that computer.
- Server Admin - administrate that server only.

Q - How can i make it so guest's cant create channels?
- Edit the ServerFlags line in the server.INI file to one of the below:
(register being authenticate with the server) (when set to 0 text messages also seem to be disabled )
0= no register, no create channel
1= can register, no create channel
2= all can create channels
3= all can register/all can create channel

Q - I cant connect to the Administrative options using my new password?
- You have to start your Team Speak 2.0 server by double clicking/opening the actual application (Short Cuts will not work)
- If you still cant connect, you will have to uninstall TeamSpeak 2.0,
- Manually Delete your TeamSpeak2 folder and all it contents.
- Reinstall Team Speak 2.0 and follow the server setup steps

Q - I cant Connect to my server using my admin Log and Password?
- You have to start your Team Speak 2.0 server by double clicking/opening the actual application (Short Cuts will not work)
- If you still cant connect, you will have to uninstall TeamSpeak 2.0,
- Manually Delete your TeamSpeak2 folder and all it contents.
- Reinstall Team Speak 2.0 and follow the server setup steps

Q - What is a Codec?
- Codec's allow you to adjust the sound quality for each channel. Higher sound quality means more bandwidth requirements
- CELP 5.1Kbit
- CELP 6.3 Kbit
- GSM 14.8 Kbit
- GMS 16.4 Kbit
- CELP Windows 5.2Kbit

Q - While Creating a channel what are the different Check Box options
- Registered = Only Registered member can chat unless voiced by the Operator/Admin
- Moderated = Guests can join and chat
- Sub Channels = Selecting this will allow you to create Sub-Channels in that parent Channel
- Default = This is the channel the members will automatically join

Q - What is Voice Request?
- This allows a guest to speak in a registered room (admin's/Operators can allow)

Q - What is the difference between a (Clan Server and Public Server)?
- Clan Server = This server is used for your Teams/Clans use only it is not available for public use
- Public Server = This server is available to be used by guests (normally a public server would allow guests to create channels for their own use)

Q - In the Administration options under settings what is the difference between ( anyone and none )
- Anyone = anyone can log on as a guest and register to your Team speak server
- None = you have to register all your guests

Edited by pwk.linuxfan on 07.06.03 to change a some plain wrong statements about the meaning of registered and moderated.
Edited by Guldi on 15.06.06 updated Teamspeak webpage Link

[Tweety Bird]

Okay seems you know much about ts2 i have a problem if instaled the 2 ts2 files on download section i instaled them both and got the server running sweet np what so ever



Bud here comes the problem today i wanted to open my server for the clan bud nether i or anyone else of the clan cant enter the server evryone gets the message this server doesnt suport this client version


WTF?

wel 20 times uninstaled 20 downloaded 20 time server activated same whit client version


stil same message doesnt suport this version


help me obi-wan :D

[woutur]

hmm not a news reader are you ;)
Download the latest server and you'll be fine again. That server had a time limit.

[Tweety Bird]

-------------- log started at 09-10-16 16:24 -------------
---------------------------------------------------------------
09-10-16 16:24:26,ALL,Info,server, Server startup initialized
09-10-16 16:24:26,ALL,Info,server, Server version: 2.0.18.25 Win32

see i use the latest server m8

bud stil got the server doesn not suport this version

1 thing i find wierd i have uninstaled it many times now and downloaded the latest versions of client and server bud when i reinstal it stil had rememberd my servers i added in client version


yes i did remove the maps after uninstal


is there a reg key that iam not aware of?

if so whats its name so i can delet it might solve the server doesnt suport this client version donno just guesing

i love ts 2 bud i realy whant my own server:D

help me obi-wan :D :D :D :D :D :D

[boxhead]

is there a linux server setup doc?

[radas]

Hi all,
I just want to ask how to put to my server, the name of the country.

TK

[PureGrain]

Originally posted by boxhead
is there a linux server setup doc? But I might make one...

[boxhead]

that would be cool.....

[-=BZDP=-Nemesis]

If you are having trouble connecting to the TS2 server admin panel and you have ZA Pro installed then re-installing it will do NO good, even if you wpe the registry. havent foun out why yet(though I will eventually) but ZA PRO blocks the Admin login. All you get when you input the admin username and the password from the server log file is............. the boxes go blank again and no login. The only workaround I have found at present is to uninstall ZA Pro and install the free version. At High Internet security it works fine and that version of ZA should be sufficient for most home gamers uses.

If anyone knows why ZA Pro blocks the admin page and knows a way around it then I'd be most interested to hear. Incidentally I'm using XP Pro.

Until da trenches.....................


-=BZDP=-Nemesis

[armoreyes]

Hi, one thing about ZA. It's a great program, but if you have a router and you have NAT enabled and the firewall enabled with it, then you don't need ZA at all.

Now my question is, if you have ther ts2 server, can you run it for free? Or do you have to register it sooner or later? If you have register it, how much is it??????

[Airborne328]

Cansome help me with TS. I installed it last night, and just to try I was able to create a channel, everything was fine. I heard ppl and everything. Now today i have my other clan mates get it. When i go to connect....2 things i cant connect to any open severs. Its says no reply from serv. or matbe TS isnt running on it.. Also my channel button isnt highlighted. So i can't create my own channel. what am i doing wrong. I created one last night... Please help....Thank You a Very frustrated Airborne328

[BlazeABlunt36]

can u tell me how to get my Server to show up on the Web Server List cuz i did all the server suff and it just wont show

[BBr|JRBlood]

Originally posted by radas
I just want to ask how to put to my server, the name of the country.That's an easy one, if it's a Windows-based server (I don't have experience with the LINUX server). You need to edit the server.ini file. Open it up in a text editor (Notepad) and look for the section [WebPost]. In that section, edit the line ISPCountry= with the country you want to put in. For example:
ISPCountry=USA.

[|3art $impson]

i did all of the stuff and it still will not let me do that

[mCn]

|3art Simpson please check your computer's system date.
Reading this thread (DankRider nice job on the instructions btw) i realized that tweety bird's problem was probably his machine's system date. If you have a look at the log snippet he provided you see that "09-10-16" means 16 october 1909 (2009?) if using the yy-mm-dd format. The current TS2 Release Candidate 1 (RC1) will stop working on 2003-03-03. So if TS2 "thinks" you are way off the valid time range it will not let you do that.

[maddogg_24]

Hello,

the other day i downloaded ts2 and i can log onto the server and get in the channels, I can hear everyone else thats in the channel, i just cant speak to them at all. i am running winme, allegro pci audio sound card with directx 8.1. aany suggestions on how to fix this problem

maddogg

[Deltasunset]

Hi there,

Just wanted to say thanks,

Delta.

[CRUSH77]

I have dun all that {nUg}Dankrider sed to do in his INSTRACTION and it went well until i got to the bit under TeamSpeak 2.0 Server Set up Section 5 -2 Click (Connection/Connect) Select (Web ServerList) Locate and Highlight your server,then Select (Copy to local Addressbook) i have no servers in Web Server list.i CANT FIND MY NEW SERVER . HELP. PS I KNOW IT IS PROBABILITY SUM THING EZY BUT I JUST DONT NO WHAT IT IS. COULD SUM ONE PLASE HELP:confused:

[guldi]

@CRUSH77:
as far as I know, servers are currentyl not listed in the webserver list. In the last month this has caused big problems cause the amount of "open" TS servers has heavily increasd => too high traffic for the TS controll server

[CRUSH77]

Ok thank you for the reply GULDI . But if thay are not listed were are thay. how do i find server

[tcd12642]

I am currently using the BlackIce firewall. Can I host a server available to the public by just turning it off?
---Thx

[guldi]

@CRUSH77
Good question ! What about goint in to the IRC chat and look there ? I assume there are people who can help you find servers.
Or connect to the public servers on www.teamspeak.org.

@tcd12642
Don't knwo this typ of firewall. But when you turn it off, I see no reason why it shouldn't work. But I recommand configuring the firewall so you can use TS and the wall.

[TrInAdOr]

You say:

4 - Connecting to a Server as a Guest, and saving our server in your addressbook
- Click (Connection/Connect) Select (Web Servers List) Locate and Highlight your desired server
then Select (Copy to local Addressbook)

But i can not get the list....

How can i?

Thanks for your patience...

[guldi]

if you know server IP's, you can save them in your Adressbook in TS. But you can not search (get) the entire weblist currently.

[shawshank62]

whenever i start my server back up, the ip changes, is there a way to have a permanent, uchanging address?

[guldi]

yes:

1) ask your provider to get a Fix IP. This will cost something !
2) use www.dyndns.org's service. You will find some info about this on this board (search) or read the FAQ of dyndns. Is's very clearly described !

[shawshank62]

thank you very much

[o.Nemesis]

How can i change admin and super admin passes ? i dont know what to do , i tryed to push administration on server icon but it taking me to some search page , what to do how to change the passwords ?

[SatanClaus]

please don't crosspost:
http://www.teamspeak.org/forums/showthread.php?goto=newpost&threadid=6537

[bfsheal]

i am so confuse can some 1 help me download it then i just need to know how to install it on my server can some 1 help me plz

[{S.A.W.}]

i have a problem with the part about starting a serever thing to talk with freinds you said to click self well it wont let me click self........................

[OD-Battlebot]

erg, i cant login to the administration thing.....i edited my server.log file but it still wont let me in...pleaase help.

[Peter]

read the manual, help files, faq, whatever...oh and do you know what a log file does ? :o)

[guldi]

edited the Log file ????
are you serious or are you trying to josh us ?

a log file is ONLY loging files, so if you try to change your pw this way, sorry, but this is too much...LOL (hope you're only making fun)

please see the FAQ as it is in there described how to use your admin logins.

[Truck]

Ok i resently installed ts for linux on a remote server. it works great how do i login into the administrator??

[Truck]

Ok i first wanna say how stupid am i!!!! I figured it out i was putting in my ip but not the right port. Well for those of u who did teh same thing i did here is the website to change and edit your team speak through administrator http://youteamspeakipwithoutport:14534/ well i hope this will help someone liek em in the future!!!

happy talkin!!!!

[Wukkuan]

Well, here goes another "n00b" question.....
I installed TS2 RC2 on a Linux server using the port 9110. When I try connecting using a Win client, I get the error bad name / password. I have set-up a username and I get the same message. I even tried using the admin and superadmin users with no luck and I know those are valid because I can log into the web admin page. I know I am connecting to the server because I don't get the "server not found" message and I can see the traffic increase on the stats page. Anyone have a suggestion?

[Dummer Sack]

If you connect via your local address book make sure you have checked the registred radio box.
Then there will be two fields. Login Name and Password. Here you have to enter your account data.
What you enter as a Nickname is irrelevant (As long it is not empty. If it is empty it will result in the error you received).

If there is only a field Server Password then you try to log in as an anonymous user.

Also check if loging in as an anonymous user works.

[Wukkuan]

Thank you. Yes, I have tried all 3 ways with no success. I have also created a tss user and group and given full permission to user, group and global and every combination in between :( I have ran as root, tss, my username.... /sigh

[Dummer Sack]

What are you talking about?
There are no groups or group permissions in TS2 (If you do not count the server permissions as groups).
I hope you are not talking about system users. Because they have absolutly nothing to do with your TS2 users.
You have to create TS2 users either by adding them via the user manager in the web interface of TS2 or by doing a register with server in the TS2 client.

If you are talking about the permissions of the files in your TS2 server directory, then of cause the user that runs your TS2 server has to have write access.
But if your registred users show up in the user manager of the TS2 web interface, then they are also in the database.

I have tried all 3 ways with no success
Does that mean that logging in as anonymous does not work either?

[Wukkuan]

Correct. Logging in as anon doesn't work either.
And yes, the owner of the directory is the tss user, but I opened the permissions just in case it would make a difference (it didn't). Currently I have 2 users I created and the superadmin and admin of which they all come back with bad login. I have tried from a WinME, WinXP and Win2k OS with no sucess either. I am sure it will be a simple setting somewhere (one that makes me smack my forehead), but I am just not seeing it.

[Dummer Sack]

Hmm I start to run out of options.

Maybe someone with more insight in TS than me should answer this question.

There is only one more thing that comes to my mind:
In your server.ini there is a variable called ServerFlags. Set it to 0 and clear the server password. Now try to log in as anon. If it still does not work as anon I don't know what may be wrong.

If no one aswers here (wait a while) maybe you should start a seperate thread in this forum. I think they will forgive you the crossposting.

[Wukkuan]

Thank you very much Dummer :)
Actually, there are currently 2 people on the server and I seem to be the only one that can't connect. I have a Cisco 827 router with all traffic open on all ports from the server. Perhaps it is an IOS / NAT issue? /shrug

[Wukkuan]

Ok... so this is a strange end. I installed Webpost, logged in that way and I had no problem. I re-tried the client and sure enough I could connect. /shrug Sunspots I tell you!!!!

Thank you for your time Dummer :)

[{AK}Hayabusa]

ya it helps a lot ty

[TALNAUS]

Ok, i followed the instructions, found my server on the web list as

TALN SERVER

i click connect and it says

[02:00:02] Connecting to 63.227.103.51:8767
[02:00:06] No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it


But i can connect to other peoples servers.

I just downloaded Teamspeak tonight off this site so it should be uptodate.

[guldi]

'Your server' is running in your LAN ? So you are trying to connect from your LAN over the WAN IP to your server ?

if yes => bad idea dude !
Most router / access devices can't handle this. Connection from within your LAN must use the LAN IP of the server.
Only people from the WAN must use the WAN IP (=> port forwarding !).

[TALNAUS]

Thanks, i got it working over my lan. But since all my friends who use teamspeak are sleeping i was wondering if some one could see if u can connect via the internet.


--------------
EDIT

For some reason ppl cant connect, even tho the pc has full access and DMZ set on it on my router.

--------------
if you wondering what DMZ is

DMZ

The DMZ PC will receive all "Unknown" connections and data.

If an Internet application does not work, and it is not listed in Special Applications, try using the DMZ feature.

The DMZ PC is effectively outside the Firewall, so has less protection. Because of this, the DMZ should be enabled only when required

[The_FreaK]

Hey where can we download the latest version??:confused: :confused: :confused: :confused: :confused:

[Peter]

in the downloads section is where I would try.

[Morillobaby]

lol :) that so correct! downloads section :)

[Hot Napalm]

when i tried to log in on the ts 2 server on the net today, the answer i got was: Login failed, try again..... but i typed the right password......

[TSUser]

ive been getting a problem of not being able to log on...kept saying login username/password is wrong and i typed each one correctly...i even reinstalled it and still got the same problem

also got that problem of not being able to log on to admin page

[[S6]_Mad_Medic_]

I need help in changeing my server name... :confused: i have no clue what to do ive tryed everything i can think of!!!














HELP ME PLZ!!!!!!!!!!!!!!!!!!!!!!

[Lleb_Kcir]

all i can say is that was great. i was able to follow all the instructions and get my server up and running with zero '0' hitches. it is up, stable, and im happy.

now as i get more members logging into my server it will be interesting to see how my system handles the load.

Thank you again for a great post. all the FAQ, and data around here is great.

:D

[Peter]

thanks for your praise for the docs, they are kind of *under*construction*, but do provide usefull to some, as it seems...good to hear. =)
*hint*: lets all go out and read the FAQ and the server+client manual :)

[Lleb_Kcir]

Originally posted by pwk.linuxfan
*hint*: lets all go out and read the FAQ and the server+client manual :)

amen to that. if i had not taken the time to read both the FAQ, this thread and many other threads here about both the server and client id of been rather lost i think. it is not intuitive, but the information is mostly there.

i did have to guess on some of the stuff as even with the info that is out there it took a bit for my blonde head to figure out what to do with the codex stuff. took a guess and was right :D

anyways. thanks again for this neet little program. i look forward to testing it and stressing it hard to see just how far i can push this.

[Shadow_Fighter1]

you say to connect using our password
"OUR password?"

Thanks

[Dummer Sack]

They just missed to "y" in your.

[NJG26KILLER4U]

sup guys

[Drake4902]

grrrrrrrrrrrrrrrr

[Dummer Sack]

Yes, very exact problem description...

Try a search fro port forwarding. Maybe you will find a hint for your problem.

[scott2hot]

I set everything up like everyone says, changed my password, but I still cannot connect to it as a client. it is a public server with no password... what do I do?
Every time I try to connect it says "no reply from server, maybe the server is offline or maybe teamspeak is not running on it".

I read that someone else had this problem, and you were talking about a wan...I don't understand...

[ralphe]

I've got a problem, i can hear other people but they can't hear me. I already lookt at the manual but that doesn't work. I do have a SB live 1400 (creative) everything is set correct, also the mixer. I think i need a splitter for my 'main box' because if a put the microfone on the computer i don't hear anaything. Coud youb please help me.

[pH1R3]

nm

[toosm:)ey]

Read the instructions, very useful btw, thanks, but I still have one question. I have a server address, port, login name and password, as I am an Admin for a server and naturally I have the server owner's permission. Is it possible for me to use WebAdmin for that server? And if so, how?

Thanks

~Smil3y :D

[dragracer391]

i cant download ts it says page not found plz help

[mr. hat]

I am trying to set up a server and it asks me for a url what do I enter here? I am running windows

[NoPleX]

Hi I'v just done all the things! I can join the servere from my own computer where i hoste the servere. But when i join on another computer it says:
[23:15:14] No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it
:confused: :confused: :confused:

I have not done more than that.... Do i have to set up something in server.ini??????


PliiiiZ help!

[Painshot]

im getting this message when i try to instail ts

Error creating registry key:
HKEY_CLASSES_ROOT\teamspeak

RegCreateKeyEx Failed; code 5
Access is denied.

can u help me instail??? plz help

[WarTiger]

Wy can y connect on my server, and others can that not.

[Nessling]

I am getting the "No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it" message.

I have attempted to set up my own server - its listed in the main web list: Nessies Server so I know it exists and I can admin it etc too. I have very very limited knoweldge of Team speak and computer waffle in genral so be gentle with me :p

I am using XP with a netgear modem router. I read somewhere in here soemthing about Lans, Wan, etc etc (abit of a pc noob here - learn as I go along). So I figured maybe I needed to port forward. Logged into my netgear management bit, and it seems I need not only the IP ( i know my server IP 81.79.132.84) but it asks me to put in the start port and the end port too. Where can I find this please? Or maybe that will not solve my problem at all and I am barking up the wrong lamp post?

Thanks in advance

Nessling

Edited PS I did read the readme file with this bit:

Q: Which ports does the TS2 Server use?
A. 8767 UDP, Server
How to change ? In the webadmin interface.

14534 TCP, WebInterface
How to change ? Location at server.ini: HTTPServer Port=14534

51234 TCP, tcpquery port
How to change ? Location at server.ini: TCPQueryPort=51234

To get server to work behind firewall, nat, masq you
need only to open/forward the 8767 UDP port.

but I am not quite sure waht to make of it

[gamefrog]

i have d/l'd both client and server. tryin to admin my server but when i right click the ts icon, the "admin" part is "faded" out so i cannot click it to set it up.

can someone give me a shout on this?

thanks in advance.

[NJG26KILLER4U]

Hey all ..

I got my TS2 Server running , I can get on it , but when my friend trysw to get it he cant , he gets this massage No replay from server or may be server is not running on Team speak 2

[Gen.AdamRund]

You say to look in (c:program flies, Teamspeak2:Server)
well i can't find my user name and password. HELP ME PLEASE

[N2394 james]

hello i need help with my server i think it is my port # if you all have an idea i will like the help thank you sever name jamitupjamessim thank you

[JD]

I am exceptionally skilled with the TeamSpeak 2 Server and Client. So, if anybody has any questions about anything regarding the two that are not answered here, feel free to E-mail me:

jdawgg@sollice.net

Regards,
Jdawgg2020

[eckblad]

Hi jdawgg - is that mail address correct ?
I tried to mail because I need some help but my was undelivered because the address wasn't known at Excite.
:confused:

Eckblad

[UR_._HoPpeR]

If you have a router can you still host a ts server?

[OLD CLAN]

I have done what u say got my team speak room all in the clan name but when i turn of my PC the team speak room just goes and all the members get kick off does that mean i have to keep the pc on ..............

[LarianLeQuella]

I'm a total moron and can't figure this out, even with the step by step instructions in the first post.

[Hambones]

ok umm i have 2 servers running but only one works and i find it in the address book and on the web but when i try to connect to it it says no reply from server or maybe Teamspeak is not running it. any help?

[Devine]

Uh ok here is my problem...I downloaded the teamspeak server and I figured everything out but I cant get into because I think I have a firewall up and I have no clue how to find it or anything. Do you have any suggestions on how to locate the firewall?

[JD]

My e-mail has switched to jdawgg@sollice.net so if you tried to e-mail my old account, it might not have went through.

Anyway, I reiterate - if anybody has a problem that has not been answered here, just give me an e-mail. I check that much more frequently than here. And now, I will try to address those who posted:

Yes, you can host a TS server behind a router. Just make sure to have AT LEAST port UDP 8767 open. If you are going to run multiple servers, open up the proper UDP ports as well (for instance, I run 4 free servers, so I have 8767, 8768, 8769 and 8770 UDP ports open). There is a way to specify which ports to run on by default, but that is complicated and for now we just want to get you all going with a TeamSpeak server. However, I think 8767 MUST be opened (for web administration).

LarianLeQuella, you can contact me if you'd like and I can try to help you out with Video tutorial or voice chat step by step instructions.

OLD CLAN: Yes, you need to have your computer running always. Just because you set it up through a web administration does not mean somebody else is hosting for you. This also means, it will use your connection bandwidth and throughput, so if you are on DSL, dialup, or ISDN you might have trouble hosting a server with lots of users.

Devine: If you have ZoneAlarm on your computer, you must DISABLE it in order to log into the Web Administration to setup your server. If you are talking about you cannot connect to a server, make sure you have the recommended ports opened: UDP 8767, 14534 TCP, and 51234 TCP.

Again, e-mail me at jdawgg@sollice.net if you need further, faster help :).

Regards,
Jdawgg

[serasmy]

I'm having a problem with the TS server I just downloaded and installed. When I try to start up TS it won't start. I checked the log and here is the error message I'm receiving:

---------------------------------------------------------------
-------------- log started at 05-05-04 09:36 -------------
---------------------------------------------------------------
05-05-04 09:36:37,ALL,Info,server, Server init initialized
05-05-04 09:36:37,ALL,Info,server, Server version: 2.0.20.1 Win32
05-05-04 09:36:37,ERROR,All,SQL, Database initialization error: Library "sqlite.dll" not found.
05-05-04 09:36:37,ERROR,All,SQL, Database initialization error: Library "sqlite.dll" not found.
05-05-04 09:36:37,ERROR,All,SERVER, Start_Server: unable to open database
05-05-04 09:36:37,ERROR,All,GENERAL, critical error, shutdown initiated

I can still open up my old TS client program and log on to a friends server with no problem. I'm just unable to open up my own server program. Any suggestions on how I can fix this? Thanks much.

EDIT: Just wanted to mention that when I open the directory for the ts server it does show the "sqlite.dll" in there, so I'm not sure why I'm getting the message that it can't be found.

[eltotoface]

when i allow registration it says bad logging name or password. i tested it right know i got myself a new account and my friend registered me and i couln't get in while trying to register.please help.

[Tominator911]

how do u make your own channel?
and
how do u find out what is your username and the password if u forgot?:confused:

[Tominator911]

ok i know how to create a channel in a server but i need to know how to create a server in teamseak2? i looked at the manual and it said nothing about it.:(

[Tominator911]

ok i fixed the problem



my second problem is that i can join my server with my ip but the other people can't i tell them my ip and nothing:confused:

[guldi]

@Tominator911
Before filling this forum with "useless" questions, would you please thinking just one sec./read manual/FAQ ?

useless = questions answered in the manual


your latest problem is probably due to a missing port forwarding (which is by the way mentioned in the manual). For port forwarding, there are LOT's of threads => search function

[Tominator911]

ok i did go to the manual 4 times and nothing, the manual did not help me, so if i wen't to the manual and found no help so i came here and asked for help.

and one more thing my ip is 192.168.0.162 i tried that and i tried this 192.168.0.162:8767 i am the only one who can get in but the others can't, the manual didn't help about that,and i can't find it in the manual.

[guldi]

You're dealing with a server and this require more then only the very basic about networking !

The IP you note here (192.168.0.162) is a LAN IP which can be and should be used ONLY inside your LAN. People from the WAN will not be able to use this IP.

You should have a second IP which is shown in the TS server auto IP detection with a world symbol (I'm quite sure this is in the manual) => your WAN IP. Unless you did not forward the TS server port, no one will be able to connect to your server (I assume you're behind a NAT access) with this WAN IP.


How to do the port forwarding:
This is highly dependable on your router/modem and as there are houndrets or thousands with different setups, it's impossible to cover them here => read your manual or ask in a specific network forum where they cover your access device.
In the T server manual, it's noted that you probably require this port forwarding. That's all info "we" can give you.

[JD]

Tominator911,

If your external IP does not show in the box when you right click on the server icon (mine never did either for some reason) then go to http://www.whatismyip.com and it will tell you your EXTERNAL IP. your 192.xxx.xxx.xxx IP address is internal, as guldi said, and other users cannot connect to that.

You also must get into your Web administration panel with the login information provided when you first installed the server. If you have never logged into the web administration panel, your friends will not be able to connect regardless of whether they try your external IP or not. Reason being - your server is not technically "started" by just double clicking the icon. You may be able to log onto it because it is internally running, but you have not actually started the server.

[Tominator911]

ok this is my real ip 210.49.71.244 and i gave my friends the ip to connect to it but still they can't connect.

and i see my server when i search and it says 210.49.71.244 that server and when i double click on it i can't connect and nobody can my server is called my real Ip 192.168.0.67 and the country is Australia. if u find it u will see that it will say 210.49.71.244 and when u double click u can't connect

[Tominator911]

oh and i did go to the administrator website 18 times and changed everything

[Tominator911]

mybe it is the Win Xp firewall

how do u disable it and where do i find it

[JD]

I have heard a lot about the Windows XP Firewall - I have never had it turned on, and never figured out how to turn it on. I use software firewall, software antivirus, and a hardware firewall as my security. If ZoneAlarm got in the way of TeamSpeak, it is more than likely the Windows XP firewall does the same.

Just do a search on Google for "how do disable Windows XP Firewall" and it will turn up with results.

[3rdXC-Superman]

Hey I tried to set my server up but had no luck so i was wondering if one of yall could add me on msn and help me out....Soccer100680********.com

[KAHUNA~*SoV*~]

ok i got ts server up...eventually.. and i can connect fine

but the problem is, none of my clan buds cant connect?

plus i have 2 IP listed at bottome where you right-click and says "Your IP's "

one has a pc icon the other has a globe icon...i connect using the pc icon but both addresses are different?

HELP!!??

[Godsblood]

......... :eek:

[brian_myers72]

Alright I definatley need HELP! Here is the details of my problem, which is the same as everyone elses :D . I have 2 systems (#1 Static LAN IP 20.20.20.101 #2 DHCP LAN IP 20.20.20.102) connected to a Linksys Router (LAN IP 20.20.20.1) and the Router is connected to a DSL Modem (WAN IP 63.227.46.53). Now the TS RS is setup on #1 and TS RC is setup on #2. On my router I have ports 8765 - 8770 UDP forwarded to #1, and I also have #1 in the DMZ. I have no problem connecting from #2 TS RC to #1, but everyone else outside my LAN cannot connect using the WAN IP. I have also tested it from out side my LAN using the WAN IP with no success. However, my server does showup on the Web Server List if you do a filter for Myers. Here are is my log after trying to connect to the TS RS from outside my LAN.

---------------------------------------------------------------
-------------- log started at 02-06-04 08:03 -------------
---------------------------------------------------------------
02-06-04 08:03:50,2112,DEBUG,All,Startup,Client version 2.0.32.60
02-06-04 08:03:50,2112,DEBUG,ProcedureInfo,Client Open,Creating and starting threads
02-06-04 08:03:51,2112,DEBUG,All,TDSoundIn.Open,opend direct Capture 8bit=0 , 11khz=1
02-06-04 08:04:29,2112,DEBUG,ProcedureInfo,Client Open,host 63.227.46.53 resolved to 63.227.46.53
02-06-04 08:04:29,2112,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
02-06-04 08:04:29,2112,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
02-06-04 08:04:32,2112,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
02-06-04 08:15:47,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:15:54,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:43:54,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:54:19,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:55:37,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:57:32,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:57:34,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:57:43,2112,DEBUG,ProcedureInfo,Client Open,host 63.227.46.53 resolved to 63.227.46.53
02-06-04 08:57:43,2112,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
02-06-04 08:57:43,2112,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
02-06-04 08:57:46,2112,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
02-06-04 08:57:46,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
02-06-04 08:57:50,2112,DEBUG,ProcedureInfo,Client Open,host 63.227.46.53 resolved to 63.227.46.53
02-06-04 08:57:50,2112,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
02-06-04 08:57:50,2112,ERROR,ProcedureInfo,Client Open,Exception: Not all bytes sent.
02-06-04 08:57:55,2112,DEBUG,ProcedureInfo,Client Open,host 63.227.46.53 resolved to 63.227.46.53
02-06-04 08:57:55,2112,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
02-06-04 08:57:55,2112,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
02-06-04 08:57:58,2112,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
02-06-04 08:57:58,544,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."

Since this post could possibly help everyone that is having the same problem, but might not know some of the basic computer terms here they are.

LAN = Local Area Network. This is all home computers that are connected to a router, which is connected to your modem.

WAN = Wide Area Network. This is the internet. WAN IP is the IP Address that is assigned to your modem.

Any help is greatly appreciated.

Myers :cool:

[Martino]

My problem is

to a fresh, up-to-date version of the teamspeak server (2.0.20.1), i obtained this error from the firt launch:

"error starting daemon. Aborted"

But! server_linux was running; there no pid file created and the logs looks good:

---------------------------------------------------------------
-------------- log started at 02-06-04 20:05 -------------
---------------------------------------------------------------
02-06-04 20:05:12,ALL,Info,server, Server init initialized
02-06-04 20:05:12,ALL,Info,server, Server version: 2.0.20.1 Linux
02-06-04 20:05:12,WARNING,Info,SQL, created table ts2_servers
02-06-04 20:05:12,WARNING,Info,SQL, created table ts2_server_privileges
02-06-04 20:05:12,WARNING,Info,SQL, created table ts2_channels
02-06-04 20:05:12,WARNING,Info,SQL, created table ts2_channel_privileges
02-06-04 20:05:12,WARNING,Info,SQL, created table ts2_clients
02-06-04 20:05:12,WARNING,Info,SQL, created table ts2_bans
02-06-04 20:05:12,ALL,Info,server, Starting VirtualServer id:1 with port:8767
02-06-04 20:05:12,WARNING,Info,SERVER, Default VirtualServer created
02-06-04 20:05:12,WARNING,Info,SERVER, admin account info: username: admin password: (censored)
02-06-04 20:05:12,WARNING,Info,SERVER, superadmin account info: username: superadmin password: (censored)
----------------------------------------------------------
---------------------------------------------------------------
--------------- log ended at 02-06-04 20:05 --------------
---------------------------------------------------------------
---------------------------------------------------------------
-------------- log started at 02-06-04 20:07 -------------
---------------------------------------------------------------


so, the teamspeak is running and responding; i can log in thru the client.
(but i have no web server)
i have discovered that: if the parameter "HTTPServer Enabled" is set to 0; the teamspeak server runs normally; whitout error:

hayes# ./server_linux
TeamSpeak Server Daemon started with PID 91231

nota: the server.pid is created as well

i have no firewall launched; no jails; and no application holding the range of ports necessary.
any idea for this crappy onboard web server?


ps: a freebsd port of an older version of teamspeak server do the same thing.

[VipeR{NF}]

ok i went to the server icon and right clicked and went to administration but it did not show anything when i clicked it, what is the problem what can i do??

[Tominator911]

KAHUNA~*SoV*~ i have the same problem, if i fix it i will tell u the problem, if u fix it u tell me the problem. tell me or i will tell u on my email address,ok, superguy911*********

[Kleeo Katra]

Ok so i am new to this TS thing. I got it downloaded and everything all fine and dandy. Got my server started. But now when my friends want to join they get a can't connect to server. I have changed my DMZ # and changed the forwarding to external ports 8767 and 8768. I am able to join on the land line. but my friends still can't.
Nothing i have done so far has worked. PLZ help me?!?!?!

[Martino]

Ok so i am new to this TS thing. I got it downloaded and everything all fine and dandy. Got my server started. But now when my friends want to join they get a can't connect to server. I have changed my DMZ # and changed the forwarding to external ports 8767 and 8768. I am able to join on the land line. but my friends still can't.
Nothing i have done so far has worked. PLZ help me?!?!?!

i think you have to forwarding an other tcp port ( identified by the value in the server.ini: TCPQueryPort=51234 (51234 is the default))

good luck... :D

ps : sorry for my bad english...

[Infernia]

I just started mine and stupid me forgot to write down the passwords for it! can someone walk me thru where to find passwords and how to set it up??

[Hackten]

i need help and i dont really like to type all of it becuase its hard to explane so can some one tell me there server and i can talk to them sometime

[JD]

Sorry - I have been inactive for a while and just realized I used to be giving tech-support in this thread. For those who got cut short, I am sorry. But I am back now, so if you have any questions please repeat yourself so I know you are still tracking this thread :). I am available for voice tech-support or forum tech-support, just let me know :cool:

Regards,
Jdawgg

[CoC*CaveMaN]

Hi, im having problems with my win32 server. i created my own server, but it wont let anyone else get in. only me. any suggestions? Thanks

[Bastian]

Ch'Ih-Yu to CoC*CaveMaN!

Stop crossposting or be terminated!

Over!

[JD]

Yes, I agree with Ch'Ih - you need to stop cross-posting and a question like that is quite easily found via a search, and in fact, the very first post in this thread will tell you what is wrong.

If all else fails, go to the FAQ and read the posts there - the posts are all made by mods, and not by the average-joe, so they will be correct. So if you need to know how to forward the proper ports, configure a server - go to the FAQ forum!

[Beaver]

Is it possible to run the client and the server on the same machine? If so, how can I do it? :confused:

[JD]

Just do it... just double click the server icon (and assuming you have it setup correctly) launch the client as well and connect to your server. For details on how to setup the server and client, read the original post in this thread and reference the FAQ forum.

The answer to your question is YES it is possible.

[Beaver]

I couldn't run TS and the Server on my machine because the router had changed my machine's internal IP address :eek:

Thanks for the advice :)

[Kris]

ok i started to do my server and got to the part right click on the server icon in your tool bar and open administartion i tried that but it doesnt do anything and it wont open up the administration part what do i do ?

[JD]

What does it do when you click on it? Does it give you a "Page could not be displayed" message?

[FXR*NAA*]

We have a problem getting into 2 of the servers we use for Teamspeak.It appears that if a server has been running for some time people cannot join server.
We shut down server and client and restart them which seems to work.These servers are left running for our squad use and are left unattended at times.We have found that if someone puts up their server we can all join.
This problem seems to be caused by server running for 48 hrs or more.It doesn't allways happen either.Can you help?
Thanks FXR
P.S. We get error message "No reply from server.Server offline or not running"
Client 2.0.32.60
Server 2.0.20.1

[JD]

Well, that sounds like it might be a host problem. What is the ISP of the host for the server? If it is DSL then it might not allow a connection to be lasting that long and is just stopping the transfer of packets for that particular process. That would explain why restarting the server fixes the problem.

I mean, I really cannot help unless I were to be at your computer. It sounds like you have it all configured right, so it has to be some non-TeamSpeak related flaw. Try hosting off a different computer / different ISP and see if it fixes the problem, that will tell you for sure whether it is the ISP or not.

Regards,
Jdawgg

[Kris]

it doesnt do anything

[-{D$H}-PhanToM]

Hi,

I have a problem. If i want to get into my server, it always says: No reply from the server Maybe the server is currently offline or maybe ts is not running on it!!!!!! So i can't get in, anybody who knows an answer plz post it.
I have TS2 Win32 Client (RC2)
version: 2.0.32.60
size: 5.8 MB
Teamspeak Win32 Client(version 1)
and TS2 Win32 Server (RC2)
version: 2.0.20.01
size: 1.55 MB
Teamspeak Win32 Server(version 1)

Thx for helping me!!!

[dk10016]

Hi. When I first downloaded the TS Server ( Windows ) it worked fine and my friends came and it was cool and then I loaded it up again and it wouldn't load. So I un-installed and the intalled it and still it won't load now. Help me please :p

[JD]

To -{D$H}-PhanToM, you need to read the server setup tutorial posted on the very first page of this thread. Also reference this video tutorial:

http://www.teamspeak.org/forums/showthread.php?p=64517#post64517

It is most likely a router problem or you did not start the server via the Web Admin. Also be sure you are giving others and entering your EXTERNAL IP not your INTERNAL IP. My tutorial also shows you how to find your external IP should you not know.

To dk10016, Too vague of an error report. If you loaded it up again make sure you loaded the TS2 Server and not the client. Also make sure you do not have 2 servers running at once. If you want to give more of a detailed report than "I loaded it up again and it wouldn't load" then I might be able to help a little more :). However, just go read the FAQ section and watch my setup tutorial - both will help regardless.

To Kris, make sure you only have 1 TS2 server running as well. The administration icon will gray out for one of them, so be sure to only have one of the "server_windows.exe" processes running at a time. Watch my video tutorial to see how to port forward, because that might be the culpret as well. 90% of the errors are either Router related or other forms of port blocking where the TeamSpeak server cannot communicate with the internet. Make sure your Zone Alarm (if you have it) is not blocking out TeamSpeak server. Do you have Zone Alarm?

Regards,
Jdawgg

[xtremesk8er]

If you are having trouble connecting to the TS2 server admin panel and you have ZA Pro installed then re-installing it will do NO good, even if you wpe the registry. havent foun out why yet(though I will eventually) but ZA PRO blocks the Admin login. All you get when you input the admin username and the password from the server log file is............. the boxes go blank again and no login. The only workaround I have found at present is to uninstall ZA Pro and install the free version. At High Internet security it works fine and that version of ZA should be sufficient for most home gamers uses.

If anyone knows why ZA Pro blocks the admin page and knows a way around it then I'd be most interested to hear. Incidentally I'm using XP Pro.

Until da trenches.....................


-=BZDP=-Nemesis

i had the same prob. wot you need to do is go into the ZA pro firewall settings > Exert, and add a new rule that allows connection to your TS server.

See enclosed image.. (hope it shows up)

Note: Change localhost to the IP of your server
and just mess with the rest till it works for you :)

[FantomChaser]

I can only say this is a Big and great Help for new Guys like me i found out to put it up on the right way on 5 min so i really say a Vote on 5 Stars its really Worth them Keep up the good work :D

[JD]

Glad to hear it FantomChaser :)

[squeakymm]

i need help here i have installed it proper but when i goto hit administration i get some serch engine i dont have a router or zonealarm and im not sure what i do next please help

[JD]

Does the search engine say:

"We can't find _____"
You can try again by typing the URL in the address bar above.
Or, search the Web:

And then there is a search box? That is not really a search engine, it just means when you tried to login to your web admin it was entering a URL that was incorrect. When logging into your own web admin, the URL should be:

http://localhost:14534/slogin.html

Or, if that doesn't work, try entering the EXTERNAL IP that your TS server is running on and make it port 14534. So like this

http://YOUR.IP:14534

Try that out and get back to me. Note that if you have a router, then you will need to forward port 14534 as well as UDP 8767. If you do not have a router nor firewall, you are pretty wide open to viruses and trojans, so I bet you probably have a router and just do not know it. Double check to make sure you don't have a router ;).

Regards,
Jdawgg

[squeakymm]

Tried the externel it kicked me out of ie the first one some fast search engine etc

[Nervax]

How can change my username!!

thx

[Neferious]

how do i get my own server can sum1 ldt me know wat to do

[Stiletto]

Hi,
I just installed the server on my computer, and when I right click, it only displays my local IP. I am currently set as the DMZ, so I would think that getting my non-local IP would not be a problem. How can I fix this?

[moocow]

Today I set up my server (it is running now) 24.92.140.164 Port forwarding works fine but I cannot log into my server with the admin password. I've read all nine pages of this thread. The admin password is c2h8lz. Web admin doesn't come up either. I can login as anonymous but not as an admin. PLease someone post some advice. Thx

[moocow]

fixed and admin passwords changed :p

[Kyuubi]

4 - Navigating and Setting up Team Speak 2.0 while in the Web Browser
- Select your server
Users Manager
- click User Manager, then click on the tool button to the right of the admin
- Type in a new admin password in both the fields


- make sure you have selected both Server Admin & Super Server Admin

i dont have a super server admin check box... only server admin... how can i get one?

[[504th]PFC.Dan]

Ummm hi I was wondering how do i create my own server on teamspeak and i already have teamspeak installed and dowloaded. Cn ya help me out please

[SpearMeDead]

Have you downloaded the TS server? (I am not questioning your intelligence, just trying to be of help...)

[-=ca=-garrett]

heres my problem.... i made the server its runing and i tryed to log onto it with client(after makin another acount) i got this

[15:05:21] No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it

and everything is as spose to be.. client and server are both runing and this stil comes up... help me

[JD]

That message is the most common thing. First, you need to make sure that whatever computer the TS server is hosted off of has the UDP port 8767 forwarded to it from your router. That is most likely what is causing your problem.

Then, log into the web admin (by right clicking on the server icon in the system tray) and going to "Administration." From there, go to Servers in the nav bar and make sure the server is started. If you see an icon that says "Start" than click it, otherwise all should be good so long as you forwarded those ports.

Info on HOW to forward ports is in the FAQ, probably still on the front page. When in doubt, use the Search function at the top of the forums and type in "Port Forwarding" and you will get all the results you could ever want.

[JD]

PFC.Dan']Ummm hi I was wondering how do i create my own server on teamspeak and i already have teamspeak installed and dowloaded. Cn ya help me out please

Here, let me write up this tutorial for you to give you a hand on creating your own server on teamspeak...

-= Team Speak 2.0 =- Server Setup

1 - Download/Install - Team Speak 2.0 Server
- http://www.teamspeak.org/

2 - Start Team Speak 2.0 Server

3 - Registering Your Team Speak Server
- Start Team Speak 2.0
- Locate and open your Server log file using Word Pad
(c:/Program files/Teamspeak2/server)
- Locate your Login and password
- sample ( LoginName: admin LoginPW: bmjk3 )
- Right Click on the Team Speak 2.0 server icon in your tray and select ( Administration )
- You will be prompted to enter the login and pass you just retrieved from your Servers log file.
enter your info and save

4 - Navigating and Setting up Team Speak 2.0 while in the Web Browser
- Select your server
Users Manager
- click User Manager, then click on the tool button to the right of the admin
- Type in a new admin password in both the fields
- make sure you have selected both Server Admin & Super Server Admin
- Then click Save. A web browser Login/Password box will pop up, enter your new info and hit remember password then save.
- NOTE: you will also use the (User Manager) to edit your registered guests..
You can make a registered guest a Server admin or Super Server Admin without changing their password by leaving it blank
(to register a client view the client setup portion of this post. Steps 4-6 in the Client setup portion)
Setting
- Click Settings
- Modify these server settings per your needs
- server name
- server welcome message
- Server Type, (clan/public) server
- Player registration Mode
- Type of Codec's to be allowed
- Save settings

5 - Connecting to your Team Speak 2.0 server as a Admin
- Install and Start Team Speak 2.0 (Steps are listed in the Client Setup portion on this post,, Sections 1-3)
- Click (Connection/Connect) Select (Web Servers List) Locate and Highlight your server, then Select (Copy to local Addressbook)
- Click on the (Local Addressbook) tab
- You should see your server's info on the right hand side of the window, with your guest Nickname.
- Select Auto-Reconnect
- Select ( Registered )
- Enter your Personal Login Name and Password
- Connect to the Server

6 - Tip on Creating Channels and Sub-Channels
- You must select a channel type for the channel to stay.
- Registered = Permanent Channel that will stay on the server till deleted.
- Moderated = You need voice or better to talk.
- Sub Channels = Selecting this will allow you to create Sub-Channels in that parent Channel
- Default = This is the channel the members will automatically join
- To create a Sub-Channel, your parent Channel must have the Sub-Channel box selected upon creation

---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------

-=Common Server Questions=-

Q - What is the difference between a Admin and a Super Admin?
- Super Server Admins - administrate all the servers on that computer.
- Server Admin - administrate that server only.

Q - How can i make it so guest's cant create channels?
- Edit the ServerFlags line in the server.INI file to one of the below:
(register being authenticate with the server) (when set to 0 text messages also seem to be disabled )
0= no register, no create channel
1= can register, no create channel
2= all can create channels
3= all can register/all can create channel

Q - I cant connect to the Administrative options using my new password?
- You have to start your Team Speak 2.0 server by double clicking/opening the actual application (Short Cuts will not work)
- If you still cant connect, you will have to uninstall TeamSpeak 2.0,
- Manually Delete your TeamSpeak2 folder and all it contents.
- Reinstall Team Speak 2.0 and follow the server setup steps

Q - I cant Connect to my server using my admin Log and Password?
- You have to start your Team Speak 2.0 server by double clicking/opening the actual application (Short Cuts will not work)
- If you still cant connect, you will have to uninstall TeamSpeak 2.0,
- Manually Delete your TeamSpeak2 folder and all it contents.
- Reinstall Team Speak 2.0 and follow the server setup steps

Q - What is a Codec?
- Codec's allow you to adjust the sound quality for each channel. Higher sound quality means more bandwidth requirements
- CELP 5.1Kbit
- CELP 6.3 Kbit
- GSM 14.8 Kbit
- GMS 16.4 Kbit
- CELP Windows 5.2Kbit

Q - While Creating a channel what are the different Check Box options
- Registered = Only Registered member can chat unless voiced by the Operator/Admin
- Moderated = Guests can join and chat
- Sub Channels = Selecting this will allow you to create Sub-Channels in that parent Channel
- Default = This is the channel the members will automatically join

Q - What is Voice Request?
- This allows a guest to speak in a registered room (admin's/Operators can allow)

Q - What is the difference between a (Clan Server and Public Server)?
- Clan Server = This server is used for your Teams/Clans use only it is not available for public use
- Public Server = This server is available to be used by guests (normally a public server would allow guests to create channels for their own use)

Q - In the Administration options under settings what is the difference between ( anyone and none )
- Anyone = anyone can log on as a guest and register to your Team speak server
- None = you have to register all your guests

================================================== ================

If you did not guess already, that was an exact copy and paste of what is the original post in this thread... It tells you step by step what to do... What was the point of asking? Are you having a specific problem with anything, or are you just too lazy to read through the long tutorial and are expecting someone to hold your hand through it? :) it is all right there, just read it...

[-=ca=-garrett]

um sry for the noobness but in the faqs i didnt find how to forweard a udp thigy to wereever i gota forward... can ya jus talk me thro it plz?

[ShadowFox77]

yeah sure. go to your router web page. usually 192.168.1.1. just type that into your adress bar. then you need a password. usually admin. then you (what type of router you have? this is linksys) go to the advanced tab and then forwarding at the top. then it gives you the firts digits of your ip, 192.168.1., then place in the box after that the last 2 or 3 digits of your ip. on the far left place in a label simply as TS2. for the Ext.Port place in 8767 in both those boxes. click the check box for this under Protocol UDP. then press enable on the far right. then apply. it says somthing like


Saving Settings
You will be retuned to the page in 8 seconds

then, close out teh page and try it. im still working on firewalls on WinXP Proif i could get some help with anyone here on that. thakns

[-=ca=-garrett]

i got some d- link thigy and that ip didnt work. were will i find it??

[ShadowFox77]

well sorry, i cant help you with that, im a freaking reatrded 11 year old kid whos really impatient and wants his damn server up. im only familiar with Linksys, sorry

[-=ca=-garrett]

:confused: :confused: im 14 :confused: :confused: would i find it in the box it came in??

[ShadowFox77]

possibly, maybe ask your dad. im sure he would know.

[-=ca=-garrett]

hehe found it.. im in

[ShadowFox77]

ok
do you have aim, if so, gimmie it in a PM, ill talk to you like that, faster and easier

[-=ca=-garrett]

nope i dun have it but alota peps want me get it were do i get it??

[-=ca=-garrett]

jus wondering but is this(ts) free if i use it for a clan in call of duty (a game)??

[ShadowFox77]

www.aim.com

its free for anygame

[-=ca=-garrett]

i meant ts lol

[-=ca=-garrett]

so is ts free for a non commercial use ex: a clan for call of duty?? if not how do i fix my problem im not sure wat to do in the modem screen.

[ColdEyez]

My squad has a public server and when someone joins and goes to another room the disappear like they are there. so my ? is how can we fix this problem? cause we also have a squad server that only our squad goes on and we don't have the same problem we have with the public. :confused:

[KaZZa]

how can i make a server i don,t now how i can help plz :)

[fredo01]

If you has SA in teamspeak how can you listen in on the other channels

[m&m's]

If you has SA in teamspeak how can you listen in on the other channels
you dont ! you have to be in the channel to hear ... and there is no way to "spy on others" and will not be a part on any new version to my knowlage , ever !

[LuFFy]

Hi,
i was following instructions to make a Ts server ... But when i go to Server administration login and try to log on , it says ' Login failed. back to login page '
Someone now why plz ??

[Myo]

hi everyone

i have a problem with my ts2. i have the client version of the program and when i go into a channel i can hear everyone that's in there but i can't speak to them all and i've checked the requirements to run this and it seems like that i have everything that i needed so if someone knows the answer to this problem i would appreciated a lot. thanks

[AdrianVaughan]

What i am after is someone to help me here with setting up this on my web page<i own a resellers account> i am having trouble cos in the read me file it says i need to set up a MYSQL databace anyone can help me on this please :) :confused:

[Renegade306]

I just Installed Team Speak Sever 2 And when I go to get my Administration this comes up:

Server Error
The following error occurred:
[code=CANT_CONNECT_LOOPBACK] Cannot connect due to potential loopback problems


--------------------------------------------------------------------------------
Please contact the administrator.

[JuvenileDBD]

I have the same problem as Luffy. Any help with admin logins to the server?

[Gunghorj]

Dank Rider, how do you pick team speak servers when you list the internet servers in a game, CODUO is the main game I play, new to it, I actually got ts to work on one server. I think I have the steps down I just need more help. I tried to find a way to download your manual but for some reason it didn't work I'm sure it is a faulty user problem, but could sure use the manual.
I have to load teamspeak, but once loaded how do you get teamspeak to load a list of servers?
If it loads a list of servers, then how can you get it to load your game. if that is how you do it. If you load a server and it opens the ts, then you have to load the game, pick that server and if it is not full then you get on and it should work, is that right? but what if you selected axis and get moved because of balancing to the allies, now you are talkng to the enemy.

I am sure that I do not have everything loaded correctly, but it has been ten years since I had to do anything except business on a sytem and all the new stuff available is amazing, would like to learn, it correctly. Would you email me the manual you put together my email is rickjaynes@cox.net it would be nice to pick the brain of someone that can give instructions; my grandson says he doesn' know how to solve a problem he set it up and it worked on the entered ip but that is all. Help would be appreciated, thanks in advance, I even have trouble finding my posts to read replies since I only get a few hours a week to be online; my grankids have work to do with chat and all and naturally that is more important, I'm suposed to know that.

[Bones]

I have read every page in this thread (yes oll 11 of them) and haven't found an answer (that has been asked before) to this question.

I followed the instructions step by step which are outlined in the first post. I read everyone of the FAQ questions underneath the instructions. I even read the FAQ questions on the Teamspeak website. I have even done a few other things that have been outlined in previous posts to previous questions.

I can log onto Teamspeak as admin, other people can find my server in the list but can't connect.

I allowed Teamspeak to work through my windows firewall (WIN XP). Didn't work.
I opened UDPPort 8767 in my firewall. Didn't work.
I disabled Teamspeak but left the port open. Didn't work.

Like I said, I'm pretty sure I have tried everything I can. I wanted to make sure I did before I posted here coz I didn't want to get into trouble lol.

I am stuck.

[m&m's]

opening a port and setting up port fowarding are to differant things in a router , witch did you do ? you state you opened a port , check your router . this site has some walk thrus that will help even if your router is not listed look thru a few most routers are real close to how there set up !! http://www.xbchelp.com/router/

[Bones]

Thanks m&m's but another problem. I don't have a router. It's a standard ADSL modem. DSL 200 to be exact. I know what you're thinking...."What a crap modem" but I do plan on getting a router. It's just a matter of time. :D

[PAw_Paw]

Hi people,

I can't log on to server administration. I just host it for friends to chat play game on. I do not rent the server to the people that use it, I host it on my Comp. for free!!

I'm running it on my Comp and I dled the Server. I use the pw for admin that the server me to log on and set thing up or I use the superadmin pw that the server dl give me to log on with, to set thing up. But, it want open up the page so I can set thing up. It goes to the admin logon page when I try to log on to the superadmin page

I've did everthing in the forum and still can't get it to work. Damm guys, Please Help Me out here

I got friends that are waiting for me to get this backup :confused:

[sjoerd]

Hay everybody,

I'm new and I've already downloaded TS server 2.0.
I started it up and I was logged in as an R SA CA and could create channels but my friend was online and wanted to take a look on my server.
he tried it a couple of times over but couldn't login.
I have read something about opening a port but I didn't get anything about the story.
could you explain me?
regards sjoerd

[JD]

PAw_Paw:

Do you have ZomeAlarm Pro enabled? If so, disable it (right click and say "shut down ZoneAlarm) and then try logging into the SuperAdmin as you tried before.

sjoerd:

It's called port forwarding. What kind of Router do you own? Linksys, D-Link? I will try to explain how to forward the necessary ports, but I need to know what brand of Router you have.

If you are not sure if you own a router, ask your parents.

Regards,
Jdawgg

[AOD*Cruiser]

can some one tell me whats wrong with the team speak web post.
i have the block but cant get it to show . runing xp pro gllcTS2 i get
Data unavailable. on my server
any idea what to do. the old ver of gllcT worked dose any one know where i could get it . should show names


Data unavailable.

- [3/32]
gllcTS2
Last Updated:
8:31 PM








[debug]
MessageTypes=LMTALL
MessageDepths=LMDALL
[Main Config]
ExternalIPDectection=1
HTTPServer Port=14534
HTTPServer Enabled=1
DateTimeFormat=dd-mm-yyyy hh:nn:ss
TCPQueryPort=51234
AllowedClientNameChars=
DisAllowedClientNameChars=()[]{}
BoundToIp1=
[WebPost]
AdminEmail=cruiser@teamaod.net
ISPLinkURL=http://www.teamaod.net
ISPName=AOD
ISPCountryNumber=2421
Enabled=1
PostURL=http://www.teamaod.net/gllcts2/webpost.php
ListPublic=0
UserAgent=teamspeak
[log]=1
access_r=0
access_u=0
channel_registerred=0
channel_unregisterred=0
sa=0
chat=0
kick_server=0
kick_channel=0
[Spam]
max_commands=10
in_seconds=2

[JD]

I figure your talking about one of the many TS2 blocks for PHP-Nuke. This is the wrong place to ask about that - this topic is for discussion how to setup a TS2 server, which you already have by the looks of it.

Not to mention, saying you have a block for TeamSpeak is probably too vague for a lot of people, unless they've managed their own PHP-Nuke website...

[~PC~Gen.Killer]

Hey! Thanks for all that on the first page, really helped a few questions I had. But, I am the only one that can join my TS server... I am not sure why that is so please help! Everyone elses' says something to the effect of "TS may not be running the server, or the server may be offline..." Please help! Any advice is welcome, THANKS!

[LeKeiser]

Hello all,

I have installed TS on my Debian server. It's running fine. I can log in with the client on my LAN.
But no one on the WAN can log in.
I have a Thomson 510V4 router, and I am only using NAT. So I configured port UDP 8767 on my router and forwarded it to my server. Doesn't work.
I created another virtual server, using UDP 12000. No luck.
I tried to find a website that could scan UDP ports, no luck.
I think I will try to scan my own PC from work, so make sure that UDP ports are opened but since the configuration of the router is correct, I don't see why it's not working...

[LeKeiser]

Hello again,

I scanned my public IP to see if 8767 UDP was open or not. And it is :

Starting nmap 3.81 ( http://www.insecure.org/nmap ) at 2005-04-25 09:45 Romance
Daylight Time
Interesting ports on bgn92-XXXXXXXXX.proxad.net (XX.XX.XX.XX):
PORT STATE SERVICE
8767/udp open|filtered unknown

Nmap finished: 1 IP address (1 host up) scanned in 0.401 seconds

So the port is open, this means the configuration of the router is good.
But no one can connect.

Any idea?

[JD]

You seem knowledgable beyond the majority with this problem :).

It is most probably a port forwarding issue. If your network has multiple internal IP's operating, be sure you didn't accidentally forward the port to a computer which the TS server is not running on.

Let me know if it was a simple problem like that. There are a couple other things we can try if that is not the case.

-Jdawgg

[DrewBear69]

i just got the server info, and im not to smart with computors... i dont know what to do... i use a router for my comp... and all i get is my router ip.. i dont know where to get my real ip.. and everyone says router wont work.. so how do i host a server with a router.. any help is greatly apreciated.. thx...

[JD]

Search the forums... Or just look at the FAQ forum - it is a sticky I believe.

At any rate, you need to go to www.whatismyip.com for your real IP - but people wont be able to connect until you get the ports forwarded too, which is explained in the FAQ forum.

Regards,
Jdawgg

[DrewBear69]

ok im more confused... how do i forward a port.. or links to a tuturial that can tell me.. none of my freinds know either... so yea... im trying to host ts through a router.. thats my prob again...

btw i did search around the forums...

[paloneous]

Man o Man! what a pain in the ###!
first, ... I downloaded ts2_server_rc2_20201.exe . My home network is a linksys router and two xp(sp2) compters. DHCP, Nat and the firewall is enabled(by default) on the router. I am following the directions on this thread VERY carefully!!!!!!

I followed the directions, and these directions (setting up a server) say "- - make sure you have selected both Server Admin & Super Server Admin" Problem here is... I have a Server Admin radio button, but no Super Server Admin Button to click! WASSSUP!
THEN its says..
"- Then click Save. A web browser Login/Password box will pop up, enter your new info and hit remember password then save."
No Login/Password box pops up here! Wassssup!
AND
"- Player registration Mode"
whats that ! I dont see it! wassssup!~
oh yeah! and I got this from my serverlog file.
"12-06-05 22:05:28,ERROR,All,frmMain, unable to detect external ip"
I even set up my xp machines ip address to be set outside the router through the DMZ feature on the router. Bad idea?

Anyway, I am very happy there are people in this site that are so willing to help the near suicidal(from frustration) people like me! One thing is for sure, TS in NOT easy! . I will be back every day untill I can host a chat for my clan in a public CSS server. OOO maybe thats not possible!!@! AAAAAAAAAAAAAAAAAAAAAAAAAAAAH SHOOOT ME!

[JD]

Try following my more up-to-date tutorial. I agree, this one that we are currently in can be quite confusing.

http://forum.goteamspeak.com/showthread.php?t=23438

Hope that helps.

[bill3969]

OK, I've checked everything and read all post here. I can connect to my sever via local network. I can not via wan. The server is set to dmz zone with all ports fowarded in dsl box. Everything is fowarding to my computer. I'm not using a router/firewall. Windows firewall is off. I've logged into admin and superadmin and made sure server is set to run. I can join other TS servers without a problem. I tried binding ip to my wan ip adress in ini file. Still nobody from outside can connect. I have two other freinds with the same problem. Me and 1 other being computer network techs. 1 of us is on cable modem, 2 on dsl. please someone help. This can not be a port problem, it has to be a TS setting problem.

[JD]

Give me the IP you are having your friends connect to (give me your IP).

[bill3969]

141.152.221.171:8767
no user/pw required

[bill3969]

Ok, figured it out. Reset my dsl to obtain a different ip and it worked. Apparently there was something wrong with outbound routing on that ip. I used tracerout to check yahoo and it worked, but my friends ips did not. (|start|run|cmd| in dos type "tracert xxx.xxx.xxx.xxx") I only got 2 hops to friends ips. After getting new ip, everything works great. Even without port fowarding or a dmz.

[Hellraiser787]

I have installed and set up the win 32 server on a computer that is at my uncles house which is always on. I can access the server from my own house but it will not allow me to login to the superadmin or admin account. How would i go about in logging in to the administration account on that teamspeak server without running them from my own computer? I have tried logging in through right clicking on the server icon and clicking administration but I can only access the admin account when im using my uncles computer and im not over at his house often or close enough to go there. Is there some way to login and edit the server still without having to be there at the computer the server is running on and access the super admin and admin through my computer? Please let me know if anyone has ideas or answers regarding my problem.

Hellraiser

[JD]

By default it runs on TCP port 14534 - so just forward TCP port 14534 and then go into Internet Explorer and type in: http://xxx.xxx.xxx.xxx:14534 and you can log in as admin or superadmin from a remote computer.

[AnonGuy]

OK. So yesterday I downloaded a Teamspeak server. I have all the channels set up and stuff, but so far I'm the only one who can access it. I also checked the web server list to see if it showed up on that, but alas it does not. I just can't figure out why no one else can get on it.

[JD]

It's a Port Forwarding problem (you have a router or firewall that is blocking connections on UDP port 8767) - use the Search button at the top and search for "Port Forwarding" - there are HUNDREDS of topics on it.

[greywulf]

Nevermind... Set a server password and it is done... more or less.

==================================================

I would like to apologize in advance if this seems like a silly n00b question. I am running TS server v2.0.r20.b1 Win32. I have seen several posts mentioning a "Player registration Mode" configuration setting. However, I do not seem to be able to find that option in the TS superadmin or admin management interfaces. Can someone tell me 1) where I can find that configuration option and/or 2) what ini entry that configuration option sets and how I would set it to deny all anonymous logons to my server? My goal is to allow only pre-registered users to log on. Any information you can provide will be greatly appreciated.

Thanks in advance,
-g

[XxChRiSxX]

I have a problem...whenever i right click on the server icon in the tray, and click administration nothing happens, what do i do to fix this?

[CVPAJW-2209]

- You will be prompted to enter the login and pass you just retrieved from your Servers log file.
enter your info and save

when i try to put in the login name and password i retrieved from the servers log file it dosnt work. any ideas? :confused:

[Wloch]

i think that my setting are fine.i hear my friends but they can't hear me.why? microphone is good and i have any idea what should i do to start have comunication with the others player.somenody can help me?

[CVPAJW-2209]

might sound stupid but is ur mic on, unmuted?

[Gogita]

Jdawgg, i've done everything what your guide said. I can see my server in de web server list. The only thing is, when i try to login, it says:

No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it


I dont have any firewalls, i've activated the programme, but still, it doesnt work for some reason :confused:

Could you plz help me Jdawgg?

[Krumbler]

Okay, here's my question:

This is the first forum I've ever ever on this site so I don't know if this is the wrong place for this but here goes.

I'm totally done with my server, no problems whatsoever, except no one's tried to join yet so I don't know if I'll have a problem with that :rolleyes:
But I created a channel when I first entered the server and then I disconnected and when I came back the channel was gone.

Is there a way for me to keep my channels open 24/7 without having the server on 24/7?

[Krumbler]

Never mind, I figured it out :p Please delete these posts :rolleyes:

[mbest1623]

hey, this is a really good tutorial and all, but i did everything exactly the way you said, and everytime that i try to connect it says error, no response from server or maybe teamspeak is not running on it. what do i do? thanks. (and i do have the ts server thing running)

[Zanwolf]

I have TS2 Server and Client both updated versions as I downloaded them yesterday. I edited my Super Admin and Admin accounts so my friend could connect from his PC, only problem is, he couldn't connect, I don't know what effects it but I do have a wireless Router with firewall on it and the server address I use is my routers one, I have made my friend a registered account and he has no password, its also a clan server. Could someone please tell me how to get around this problem, pleaseee.

Thnak you.

[The Bum]

When i try to log on my server an error comes up

[16:39:18] Connecting to 85.81.56.141:8767
[16:39:21] No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it

I can log on to other servers, but not the one i made.

[BlackDrago]

hi i am trying to make server on teamspeak for a clan i am making with a friend on a online game how do i get a server and is there a fee or and monthly fees to have a server.

[JD]

hey, this is a really good tutorial and all, but i did everything exactly the way you said, and everytime that i try to connect it says error, no response from server or maybe teamspeak is not running on it. what do i do? thanks. (and i do have the ts server thing running)

Try this tutorial:
http://www.cod2hq.com/modules.php?name=Forums&file=viewtopic&t=54&

And if that doesn't fix your problem, let me know. It is likely a Port Forwarding problem (in which case I link you to some Port Forwarding resources).

The Bum:
It is a port forwarding problem. Follow the links in my tutorial for help on that. Or search for "Port Forwarding" on this forum.

Zanwolf:
Port Forwarding.... You said it yourself, you have a router and firewall; you'll need to forward port 8767 of your router to your computer that hosts TS. Follow my previous advice for this.

BlackDrago:
You clearly didn't read this thread, and just posted... Please read at least the first post on this thread which should answer those questions, or go to the link I provided for a more up-to-date tutorial.

[Fonzie]

Hi. New here (though not to forums) and I had a problem with my Primary HD. I had to back up everything to my secondary, then reformat, then I reintalled my programs. I have found that if i reinstall my TS Server, everything is gone! My Clan rooms are no longer there, and I cant even find it by using my former Superadmin Password. (And no its NOT Superadmnin. i changed THAT a long time ago). now the server seems to think its new again. I am not sure what to do. Help anyone?

[Bastian]

This is because you did not backup the 3 files you need: server.dbs, server.ini, server.log. If any of these 3 files is missing the servers thinks it's a new install and creates these 3 files so your old server.dbs (if present) will be overwritten and all information inside are lost forever unless you have a backup.

If you still have a copy of your old server.dbs you can create the other 2 files and leave them empty or you can copy it over the automatically created 3 files when starting the server the first time.

Don't forget to shut down the server before doing this to avoid problems.

[JD]

Gogita -

You need to connect to your own server through your INTERNAL IP Address rather than the external IP address. So use the 192.168.x.x IP or type in the word "localhost" without the quotes when trying to connect to your server.

localhost:8767

or

192.168.x.x:8767

You cannot connect to your WAN address because you are on the wrong side of your router and aren't going to be able to connect to that particular address.


Krumbler -

I bet you just made the channel "Unregistered" - when you create a channel and see the letter "U" next to it, it will disappear after you leave it. Make sure when you create the channel you have the "Registered" flag checked at the bottom of the popup window.

RTFM ;).

[huntercloud]

I'm not extremely familar with teamspeak server running and such.
im tryin to run a small server for up to 5 people or so
i've gotten as far as seeing my server in the web server list
but when i go to finish following the directions given, i get the error
no reply from server maybe server is offline etc.

me and my cousin are trying to figure it out, we've each started a server
we can't manage to connect at all
we've both gone through and did the web based stuff, registering both
logins with passwords all that good stuff and still nothing.

is there anything anyone can think of or suggest

also, we are both behind routers and are given 2 IP's in the server icon in the tray.

[marcelrx]

I'm not extremely familar with teamspeak server running and such.
im tryin to run a small server for up to 5 people or so
i've gotten as far as seeing my server in the web server list
but when i go to finish following the directions given, i get the error
no reply from server maybe server is offline etc.

me and my cousin are trying to figure it out, we've each started a server
we can't manage to connect at all
we've both gone through and did the web based stuff, registering both
logins with passwords all that good stuff and still nothing.

is there anything anyone can think of or suggest

also, we are both behind routers and are given 2 IP's in the server icon in the tray.

Discused 1000 times before: READ THE FAQ BEFORE POSTING: http://forum.goteamspeak.com/showthread.php?t=19293
Point 7 and 8.

[huntercloud]

sorrrrrrrrry, like i said completely new to running any server or really using the program in general, it came highly talked about from some friends.
and i don't have all the time in the world to run down the ifs ands or buts of the forums i just posted the problem and hoped for a quick short reply and that be it.

i ended up figuring out the problem, i didn't