Behind router, how to act as server?

[-Rossi-]

The ip displayed is LAN ip, i do not know what is the ip to tell to my other client. Anything i need to set in the router? Thx

[m&m's]

The ip displayed is LAN ip, i do not know what is the ip to tell to my other client. Anything i need to set in the router? Thx


this post may help http://forum.goteamspeak.com/showthread.php?t=19293
port fowarding is need 8767 udp to the lan ip and check the enable box .
www.whatismyip.com will show you your real world ip , thats the one you hand out to others , you should use your lan ip or the loopback ip 127.0.0.1 if client and server are on same pc

[The_Mexican]

u might wanna also go2 your router cpanel and do a dmz so it opens all ports just incase u need 2 setup and ftp etc... in the future :)

[-Rossi-]

My sound, sound from my microphone not clear, so noisy. I have check the sound setting and control panel sound and devices ( me using windows XP ).

What's the problem usually?

[guldi]

- update sound / directX drivers
- try wave / direct sound in TS
- play around with recording settings in sound mixer / TS
- if you use onboard sound chips you might want to test a real sound card as well