jomojr
14-01-2005, 16:06
Im running a Windows server and here is the issue. I have 4 rooms set up n my server, each room has 6 subchannels. I will use room one as an example to describe the issue.
Room 1 is set to a max of 60 users. " I know it will never reach that "
Sub Channels of room 1 are set to allow a max of 8 users per room.
Here is the glitch If I have lets say 6 people in Sub Channel 1 , and 2 people in Sub Channel two. No one else can join subchannel 1 or two because the server is saying the subchannels are full. If I then go and set Sub Channel 1 to max of 10 then two more people can join either of the channels. But then that is the limit again 8)
Example:
Server Settings
Room 1 = max 60 users
Sub 1 = Max 8 users
Sub 2 = Max 8 users
Sub 3 = Max 8 Users
--------------------------
Actual connected Users
Room 1 = 0
Sub 1 = 4
Sub 2 = 4
Sub 3 = 0
---------------------------
New user attempts to connect to sub channel 1 and server reports that Sub Channel one has reached its max users.
Any help would be greatly appreciated.
Room 1 is set to a max of 60 users. " I know it will never reach that "
Sub Channels of room 1 are set to allow a max of 8 users per room.
Here is the glitch If I have lets say 6 people in Sub Channel 1 , and 2 people in Sub Channel two. No one else can join subchannel 1 or two because the server is saying the subchannels are full. If I then go and set Sub Channel 1 to max of 10 then two more people can join either of the channels. But then that is the limit again 8)
Example:
Server Settings
Room 1 = max 60 users
Sub 1 = Max 8 users
Sub 2 = Max 8 users
Sub 3 = Max 8 Users
--------------------------
Actual connected Users
Room 1 = 0
Sub 1 = 4
Sub 2 = 4
Sub 3 = 0
---------------------------
New user attempts to connect to sub channel 1 and server reports that Sub Channel one has reached its max users.
Any help would be greatly appreciated.