USR 9106 with Teemspeak

[rickyb]

For sum stupid reason! :confused:
I'm having problems setting up a server with a USR9106. I have done every thing it says to do in the 5 star guide at the top but it did'nt work. And now I can't deleat my mistakes beceuse of Status:3. Please help!
PS the support site is rubish!
Look at it now! (http://www.usr-emea.com/support/s-prod-template.asp?loc=unkg&prod=9106)

[rickyb]

Quick please I need to get it sorted! :mad:


EDITED by Guldi:
1) This foums is NOT a router forum, so have patience or go somewhere else (www.broadbandreports.com)!
2) Your request is VERY inaccurate. Post more details WHAT your actual problem is.

[CheshireCat]

Hi DJ

What's up precisely? (why didn't you tell me earlier, Im not a dragon :cool: )

If it's setting up a server/port forwarding to your ts server, use the Virtual Servers Usage case section from security section on
http://www.usr.com/support/9106/9106-ug/casestudy.html#virtual

Click Add.
Select Customized service and complete the fields with the appropriate values.
Protocol: UDP
External port: 8767
Internal port: 8767
Internal server IP Address: (this is internal LAN IP Address of the teamspeak server computer eg 192.168.0.2 or 10.0.0.2 or whatever).
Click Apply.

What is the Status 3 to which you refer

[rickyb]

Status 3 is something that I don't have a clue about. It keeps sayin that I cant remove beceause of status 3. Have a look! (atachment)

Thanks

PS it says nothin on the USR support site!

[rickyb]

What are the values i need to put in!

[CheshireCat]

Hi Rick

I think you need to reset your router first to return it to its factory settings. Maybe there's a button on the unit to do this.
If you've entered any settings, write them down somewhere before you reset.
After that start again to reconfigure the router as you did when you bought it. I hope you don't have to do too much.
Then, to set up port forwarding for teamspeak, follow the instructions I gave you on my earlier post
good luck