PDA

View Full Version : TS + Wow: I can't hear, the others hear too loud

Krag
03-02-2005, 04:18
I searched and I didn't see anyone reporting this problem, so let me ask here for help/suggestions/etc.

I've downloaded TS Client, started it up and tested it against the test servers. Fine.
Then I started World of Warcraft (WoW), and a guildmate passed me the ip of the TS server he was using.

So, I connected to that server.
I see his name and mine in the channel.
Next I tried to speak.
First problem: he kept on saying my volume was way way loud. I tried turning down every volume control I found, but that didn't seem to make any difference.

Second problem: I could not hear him (nor others that joined us on the channel).

I'm using a SoundBlaster Audigy 2 ZS audio card,
and a headset+mic from Logitech (the system should be ok since it worked when playing Unreal Tournament 2k4).

Suggestion?

Thanks in advance,
F.O.R.
(a.k.a. Krag)
--UK-viRuS
03-02-2005, 13:46
Have you tried the built in windows volume controls?

These also affect TS
Krag
03-02-2005, 15:47
Have you tried the built in windows volume controls?

These also affect TS

Yes, virus.
Tried those and didn't make any diff :-(

Thanks for the tip anyway,
F.O.R.
EnFission
03-02-2005, 22:16
ok here is a problem i had when i installed the same card you currently have...TS2 doesn't automatically change drivers when you install a new driver, at least it didn't with mine... so that could solve it...if it doesn't then i'll check around on that problem...
Krag
03-02-2005, 23:45
ok here is a problem i had when i installed the same card you currently have...TS2 doesn't automatically change drivers when you install a new driver, at least it didn't with mine... so that could solve it...if it doesn't then i'll check around on that problem...

EnFission, thanks for the suggestion.

I have not changed the sound card since I installed TS, but I figured I would check anyway just in case I updated the drivers since then.
So I opened TS and I get this error message (which I've never seen before):

Error:
TDSoundIn.Open: no sound driver is available for use.

After clicking ok, I get the usual TS window.
I got this error only if I start TS without my mic/headset plugged in, so I think it's just telling me there's no driver for the mic. (if I open TS when the headset/mic is plugged, I don't get the error msg).
But you certainly seem to know better than I, so I figured I'd post.

Also, how can I tell TS to use a specific audio driver?
I checked the FAQ but nothing seemed immediately related.

Thanks again,
F.O.R.