Server on LAN: others are fine, but they can't hear me

[calderstrake]

I have the server installed on a machine on my LAN. I configured all the oprt forwarding, etc. It works on the internet perfectly.

However, I cannot connect to the TS Server from a PC on the same LAN correctly. I can hear everyone but cannot be heard. I have tried everything. It must be a protocol issue. I have went through the configuration of my sound card, tested the mic, etc. I have even tried two differnt PCs with two different soundcards. It must be a setting in windows or the server.

Please help. :)

[guldi]

- can you record in the win wave recorder ?
- does the locale loopback mode test on TS works ?
- you connect locally by using the LAN IP and NOT the WAN IP ?

=> if not, check your sound mixer settings

[calderstrake]

- can you record in the win wave recorder ?
- does the locale loopback mode test on TS works ?
- you connect locally by using the LAN IP and NOT the WAN IP ?

=> if not, check your sound mixer settings
Yes I can record in win wave recorder.

What is a locale loopback?

I can connect local and global from my machine

no problems with the sound mixer settings.

It has to be a TS problem.

[guldi]

the locale loopback mode is a test mode included in the TS client (check through your client menus). As soon as you activate it you can test recording in TS with the selected codec.

- test that
- try wave / direct sound in TS

[m&m's]

try this info in this post http://www.teamspeaktalk.com/showthread.php?t=119

[calderstrake]

try this info in this post http://www.teamspeaktalk.com/showthread.php?t=119
With all due respect, I am not a newb. I have looked through every thread already and I have seen this thread at least 10 different times. I do not have a problem with my sound card settings.

@guldi
I will try this later today when I get back home. Thanks for the suggestion.

[m&m's]

do you have the latest updates in your router ? there was a sound issue a while back do to a firmware issue if i remember correct "dont rermember the brand" linksys i think

still sounds like the sound mixer to me
post your find when you get it fixed

[calderstrake]

do you have the latest updates in your router ? there was a sound issue a while back do to a firmware issue if i remember correct "dont rermember the brand" linksys i think
I have a D-link 4100 and I just update to the latest version to try and fix it.
still sounds like the sound mixer to me
post your find when you get it fixed
Both of these machines work on OTHER TS Servers without any configuration to the sound. It has to be a server and/or protocol issue. I will post when I figure it out.