PDA

View Full Version : Tried everything....help...please...../die

vrau
21-09-2005, 23:53
Ok to start out I spent 4 hours searching these fourms and all over the web to try and figure this out but I still cant.. so heres my problem.

I can get on my server through my static Lan Ip of 192.168.1.103 but once i give anyone outside my WAN ip they cant get on.

I have a router and it is configured as follows:

Ports allowed:
Start End Protocal addy
8767 8768 UDP 192.168.1.103


Triggered Ports:
Trigger range Forwarded range
8767-8768 8767-8768



all below are Defaults
Firewall protection: ON.
Block anonymous Internet requests: ON.
Filter mutilcast: OFF.
Filter internet NAT redirection: ON.
Filter IDENT(port 113): ON.

VPN

IPsec passthrough enabled
PPTP passthrough enabled
L2TP passthrough enabled



I have no firewalls on, Nortons, ZAP, or XP....(for debuging purposes)


The following is my .ini
____________________________________________
[debug]
MessageTypes=LMTALL
MessageDepths=LMDALL
[Main Config]
ExternalIPDectection=1
HTTPServer Port=14534
HTTPServer Enabled=1
DateTimeFormat=dd-mm-yyyy hh:nn:ss
TCPQueryPort=51234
AllowedClientNameChars=
DisAllowedClientNameChars=()[]{}
BoundToIp1=
[WebPost]
AdminEmail=na
ISPLinkURL=na
ISPName=Private
ISPCountryNumber=2457
Enabled=1
PostURL=
ListPublic=0
UserAgent=teamspeak
[log]
access_r=0
access_u=0
channel_registerred=0
channel_unregisterred=0
sa=0
chat=0
kick_server=0
kick_channel=0
[Spam]
max_commands=10
in_seconds=2





and thats all....HELP!
vrau
22-09-2005, 00:49
I checked the status with this site http://83.151.18.234/ts/server_test/server_status.php


and it says my server is online....yet no one can connect to it.
Weird huh.
guldi
22-09-2005, 13:57
what error do they get (see client.log as well) ? A simply no reply or a timeout as well ?
vrau
23-09-2005, 21:03
Can I do that on the same computer? Or do you want me to mail you the IP and stuff and you can try it?
guldi
26-09-2005, 08:16
no I don't need the IP,...
I simply request that you check the server.log and if possible the client.log of the users having problems to connect. If you've doen the port forwarding correct, I assume you might have a timeout problem.
What I sofar requested is also recommended in the no reply FAQ... why don't you have a look at it :rolleyes: