jamie_betts
13-02-2006, 20:17
Okay, so I could connect to a server on Saturday, then since Sunday I am unable to.
I have read the FAQ. The server is up and running.
I have run in debug, disabled my firewall, and checked the server is working (other people are connected, but me and a few others are having this problem). Nothing fixes it.
Here is the log file:
---------------------------------------------------------------
-------------- log started at 13-02-06 20:12 -------------
---------------------------------------------------------------
13-02-06 20:12:04,3992,DEBUG,All,Startup,Client version 2.0.32.60
13-02-06 20:12:04,3992,DEBUG,ProcedureInfo,Client Open,Creating and starting threads
13-02-06 20:12:04,3992,DEBUG,All,TDSoundIn.Open,opend direct Capture 8bit=0 , 11khz=1
13-02-06 20:12:08,3992,DEBUG,ProcedureInfo,Client Open,host 70.84.233.220 resolved to 70.84.233.220
13-02-06 20:12:08,3992,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
13-02-06 20:12:08,3992,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
13-02-06 20:12:12,3992,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
13-02-06 20:12:12,4048,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
Something is going wrong somewhere, and it seems other people are experienced the same problem (presumably for the same reason).
Any suggestions?
I have read the FAQ. The server is up and running.
I have run in debug, disabled my firewall, and checked the server is working (other people are connected, but me and a few others are having this problem). Nothing fixes it.
Here is the log file:
---------------------------------------------------------------
-------------- log started at 13-02-06 20:12 -------------
---------------------------------------------------------------
13-02-06 20:12:04,3992,DEBUG,All,Startup,Client version 2.0.32.60
13-02-06 20:12:04,3992,DEBUG,ProcedureInfo,Client Open,Creating and starting threads
13-02-06 20:12:04,3992,DEBUG,All,TDSoundIn.Open,opend direct Capture 8bit=0 , 11khz=1
13-02-06 20:12:08,3992,DEBUG,ProcedureInfo,Client Open,host 70.84.233.220 resolved to 70.84.233.220
13-02-06 20:12:08,3992,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
13-02-06 20:12:08,3992,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
13-02-06 20:12:12,3992,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
13-02-06 20:12:12,4048,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
Something is going wrong somewhere, and it seems other people are experienced the same problem (presumably for the same reason).
Any suggestions?