Can some 1 plz help me

[redfoxy45]

this is really hard i don't know what to do i made a superadmin account and i think i made a server but i don't know how to get to that server i have ts2 RC2 but i cant find the ip adress or anything.....im really confused can some 1 plz help me?:confused: :confused: :confused:

[sgtbenc]

I'm assuming that the server is on your computer. To get to the webadmin, use this link http://localhost:14534/slogin.html. To connect to your server, put this in the address box: localhost:8767

[Nicoleise]

That most likely wont work.

(Read my post (http://forum.goteamspeak.com/showthread.php?t=29512) to see why, sgtbenc :) )

You have to rightclick your server icon in the system tray (That's the thing next to your system clock (assuming you're running Windows). Then fold out the menu "Your IPs" and see what the IP with the blue globus next to it says. Lets call it 256.256.256.256 (The IP I wrote is invalid, as it is impossible. Your IP of course will be different) That IP will be your WAN IP.

Now. Open up your browser, and in the adress bar, type in

http://[yourip]:[httpport] . That will become http://256.256.256.256:14534 in this example. That will give you the log on screen, where you have to put in the superadmin username, default, that username is superadmin , and then the password, given to you. If you cant remember these informations, even though it's a good idea to write them down, you could find them in the file Server.log . If you look at line number 14 and 15, it should say

server.log (line 14 - 15) :

13-03-06 01:49:41,WARNING,Info,SERVER, admin account info: username: admin password: xxxxxx
13-03-06 01:49:41,WARNING,Info,SERVER, superadmin account info: username: superadmin password: xxxxxx


That would be your username and passwords for the superadmin account, highlighted in red.

For connecting to your server, right click on the server icon, as before, and pop out Your IPs. This time, you must use the IP with the computer next to it. That is your LAN IP. Open your TeamSpeak 2 RC client, and click Connect -> Quick Connect

And under Server adress/IP (the first field) put in your LAN IP followed by the server port, which is 8767 by default.

Example : 256.256.256.256:8767

Then, in the next field, put in your Nickname (this name will be seen by other people on the server.

Then hit connect.

Note, that your WAN IP and LAN IP can be identical. WAN IP is the IP all other people must connect to. LAN IP is the IP you (and your local area network) must connect to.

I hope this helped. :)

NicoLeise

[sgtbenc]

That most likely wont work.

(Read my post (http://forum.goteamspeak.com/showthread.php?t=29512) to see why, sgtbenc :) )
Your post is wrong. Both of those that I said earlier will work if the server is on his own computer. In your other post you said connect to http://localhost:8767. That will not work because 8767 is for the client to use to connect. 14534 is the default webadmin port.

[Nicoleise]

Well... I actually did it with the http port... But none of my ports are default - for security reasons. :)

But lets call them by standard names :

http://localhost:14534 -> I dont get logged on and doesn't recieve errors. It simply refreshes.

http://my.ip.adr.ess:14534 -> I log on as normal - and if something goes wrong, I recieve the error message.

I don't know if I actually meantioned the wrong port in the post - I'll check that out. But I'm fully aware, that the port needed is the http port.

Also - my WAN IP and LAN IP are identical - according to TS server, and I log on, through the client, using my normal IP (which is properly understood as the LAN ip) :)

_
NicoLeise

[TATER]

I ahve made a server but it wont let me login to my superadmin so i get on my admin and check everythign then i go to ts rc2 my server is on there buy it says error when i try and login to it

whats wrong?

[Nicoleise]

I honestly must say, that your post is very hard to read, and understand. Sorry.

But as I understand I, you try to log on your through your TeamSpeak client, to your server, and can log on, when entering without giving a username or password.

But you can't connect when using the superadmin login (as far as I can understand you) ?

If this is the case, that is actually correct. Your superadmin account is not for use in a specific teamspeak server, but for managing TeamSpeak servers. If you want administrative functions on your teamspeak server, log on with the regular admin account. (Username is "admin" )

If I understood your question wrong, I must ask you to post it again, asking in a different way :)

Hope it helps, though

_
NicoLeise