SME Server

[l_doddrell]

Hi guys,

This is directed at anyone who has sucessfully installed TS Server on SME Server.

My server is 192.168.1.254. Using GRC I tested each port to find that anything destined to other machines at 192.168.1.1 or ...1.2 for example, worked. But anything heading for the server itself (...1.254) was blocked. Therefore a rule must be in place that stops anything from heading to the server.

Surely if the web interface has a forwarding rule in place this default rule should be overidden?

How do we go about doing this?

*UPDATE* SME Server 7.0 (RC2) appears to correct this. The web admin forwarding rules now read as "localhost" rather than the IP addy of the server. Well done guys!

Regards.

[glynz]

I can get it working but only on my local network

(in that i can connect locally but not on my external ip)

any ideas how to open port (im on new ver of sme server just fresh installed).

i got 8767 udp and tcp ( i know but i put both in ) looking at being forwarded to local host. any one with any ideas...

to my understanding, yeh ok i dont have much, it should work...




Glyn

[l_doddrell]

It'll be worth putting the other ports in too:
http://protocolinfo.org/wiki/Teamspeak

[glynz]

cheers.. ive added 51234 TCP.. now i need someone to test it..lol

ill let you know if it works... thanks for the help

Glyn



Yup it worked a treat..

so here goes it here is my port forwarding table

Protocol Source Port(s) Destination Host IP Address Destination Port(s)
TCP 51234 localhost 51234
TCP 14534 localhost 14534
TCP 8767 localhost 8767
TCP 5143 localhost 5143
UDP 8767 localhost 8767
yeh ok i may not need them all but who cares.. it works... im using it.. i dont care.. ok i do but ill not admit it..

now .. someone come up with a sme server pannel for cron jobs so it would have been easier to execute my script to get the darn thing to start

8-)