I can hear, they can't

[NinaSis]

I can hear them, they can't hear me...

I've check all the things in the Q&A in the manual.

Any clue on what else it could be?

[NinaSis]

i was looking at other post and thought i would clarify...

When I use push to talk, the light turns green, but they can't hear me...

When I test, my mic works...

When I use my mic in my recording studio, it works...

[Kingfish]

try reading the forum rules.. also, post anything and everything you have tried. try the faq too.

[NinaSis]

I don't really know what you need to know so..

I have checked the sound settings on my pc and nothing is muted/sound card set right
I have checked the volume and mic settings and they are not muted
I have ts set on push to talk and I am using the right button
When I test, I can hear myself

[Judas]

do you hear yourself as in "you hear anything what you say because the microphone is set to playback anything it picks up" or as in "you hear yourself in local loopback testing with a delay of roughly 1-2 seconds".

If it is the first, your soundsettings are wrong and your microphone isn't set as recording source (at least not in teamspeak, make sure to have to correct driver set for recording... somehwhere in teamspeak options). If it is the second... (which i don't really belive)... it would be some rather interesting problem and it would be questionable if it would really be your side that does have a problem.

[Kingfish]

Maybe you are in a moderated server and don't have voice rights..