usafpitot
19-08-2006, 02:36
This is what i found in the log.
18-08-06 21:27:23,2284,DEBUG,ProcedureInfo,Client Open,host 24.172.179.176 resolved to 24.172.179.176
18-08-06 21:27:23,2284,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
18-08-06 21:27:23,2284,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
18-08-06 21:27:27,2284,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
18-08-06 21:27:27,2384,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
18-08-06 21:31:18,2284,DEBUG,ProcedureInfo,Client Open,host 24.172.179.176 resolved to 24.172.179.176
18-08-06 21:31:18,2284,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
18-08-06 21:31:18,2284,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
18-08-06 21:31:21,2284,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
18-08-06 21:31:21,2384,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
18-08-06 21:32:33,2284,DEBUG,ProcedureInfo,Client Open,host 24.172.179.176 resolved to 24.172.179.176
18-08-06 21:32:33,2284,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
18-08-06 21:32:33,2284,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
18-08-06 21:32:36,2284,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
18-08-06 21:32:36,2384,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
I am behind a router, teamspeak was working fine until today when teamspeak disconnected and a little window popped up and said a network cable is unplugged, then 2 minutes later it went away and internet access was restored by i couldnt connect to teamspeak from that point on, I am not running a personal firewall nor was i running one before it disconnected. I am running windows XP professional edition.
18-08-06 21:27:23,2284,DEBUG,ProcedureInfo,Client Open,host 24.172.179.176 resolved to 24.172.179.176
18-08-06 21:27:23,2284,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
18-08-06 21:27:23,2284,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
18-08-06 21:27:27,2284,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
18-08-06 21:27:27,2384,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
18-08-06 21:31:18,2284,DEBUG,ProcedureInfo,Client Open,host 24.172.179.176 resolved to 24.172.179.176
18-08-06 21:31:18,2284,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
18-08-06 21:31:18,2284,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
18-08-06 21:31:21,2284,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
18-08-06 21:31:21,2384,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
18-08-06 21:32:33,2284,DEBUG,ProcedureInfo,Client Open,host 24.172.179.176 resolved to 24.172.179.176
18-08-06 21:32:33,2284,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
18-08-06 21:32:33,2284,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
18-08-06 21:32:36,2284,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
18-08-06 21:32:36,2384,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
I am behind a router, teamspeak was working fine until today when teamspeak disconnected and a little window popped up and said a network cable is unplugged, then 2 minutes later it went away and internet access was restored by i couldnt connect to teamspeak from that point on, I am not running a personal firewall nor was i running one before it disconnected. I am running windows XP professional edition.