Teamspak + medusa 5.1 usb headset

[firestormpt]

Hi.

In this christmas i won one medusa 5.1 usb headset.

Now i have one problem:
- ppl only listen me when i choose output card creative xtreme, but i can't hear because i am with headsets.

- when i choose output the headsets, ppl don't hear me :S


anyone have some experience like this ?

SO: XP SP2
Sound Card: creative xtreme fatality


tks

[WolfStar76]

It *should* be as simple as leaving your Windows sound configuration alone, and simply telling TeamSpeak to use the headset for input and output.

However, I know that Windows likes to assume "new" devices are "default" devices sometimes, so it's possible that plugging in the headset is causing Windows to force-change your input and output.

I'd start by making sure the drivers for both your soundcard and the new headset are fully up-to-date (it never hurts to check this).

Then I'd plug in the headset if it isn't already and make sure Windows still sees the Creative card as the "default" for sound output.

Once that's confirmed, launch TeamSpeak and tell it to use the medusa for TeamSpeak output (and for input if it has a microphone).

At that point It *SHOULD* just work.

If you're still having problems, however, there's a voice tuning wizard built into the Sound Control Panel for Windows XP. Simply open the Sound settings from the Control Panel, and look on the Voice tab. Tell it which card(s) you want to optimize (since your headset detects as a sound card) and run the wizard. This will usually help select microphones, unmute them, and prevent non-microphone input (like system sounds being heard by everyone).

Good luck - let us know how it works out.

[firestormpt]

don't work m8....

if i have micro medusa in input and sound blaster in output in settings, i can speak but i can't hear.
When I change to output medusa, i can't speak but i can't hear....

omfg

[WolfStar76]

Try checking for any updated drivers (if I haven't already said that).

Also try toggling your TeamSpeak sound settings from DirectSound to Wave (and/or back again).

[firestormpt]

already did that.

download all new versions, c-media and x-fi creative.

change direct sound to wave and wave to direct sound but is the same...:s:mad:

[WolfStar76]

Have you checked the sound mixer options for the medusa sound "card"?

Make sure that the mic is "selected" in the recording properties, and try turning up the gain if available.

Alternately - let Windows do some of the grunt work for you and run the voice wizard from the "Voice" tab of the sound options in the Windows Control Panel.

[firestormpt]

already do that....

mic work in windows, i can save me talking but not work in ts....:eek:

[pepelu91]

I have solved the problem putting another controladora PCI usb. Removes everything what you have in the USB and test. To it my me has worked.

PD (my English is not very good, Sorry).

Por si entiendes el español:
Yo tenia el mismo problema con unos Trust 5.1 USB Headset. He puesto otra controladora PCI con puertos usb y he enchufado los cascos usb y me ha funcionado. tambien me ha funcionado si quitaba el teclado y raton usb. Si necesitas mas informacion dimelo. A mi me funciona (por fin) sin ningun problema.

Un Saludo