same old, with a twist

[qDreams]

I'm having the typical problem, i cant access any servers other than the public servers. ok well not enitrely the same problem as everybody else.

When i try to connect to any other server it comes with the same message;

No reply from server
Maybe the server is offline
or maybe teamspeak is not running on it

I've tried to switch on the debug mode and looked at the log this is what it says

19-07-07 01:57:18,2824,DEBUG,All,Startup,Client version 2.0.32.60
19-07-07 01:57:18,2824,DEBUG,ProcedureInfo,Client Open,Creating and starting threads
19-07-07 01:57:18,2824,DEBUG,All,TDSoundIn.Open,opend direct Capture 8bit=0 , 11khz=1
19-07-07 01:57:21,2824,DEBUG,ProcedureInfo,Client Open,host 83.221.145.85 resolved to 83.221.145.85
19-07-07 01:57:21,2824,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 01:57:21,2824,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 01:57:24,2824,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
19-07-07 01:57:37,2824,DEBUG,All,TMainForm.FormDestroy,FCal lbackSynchronizer.Free done
19-07-07 01:57:37,2824,DEBUG,All,TMainForm.FormDestroy,FSou nd.Free; done
19-07-07 01:57:37,2824,DEBUG,All,TMainForm.FormDestroy,FSou ndNotifications.Free done
19-07-07 01:57:37,2824,DEBUG,All,TMainForm.FormDestroy,FWav eSaver.Free done
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active FClientReadThread.waitfor
19-07-07 01:57:37,3268,DEBUG,All,TClientReadThread.Execute, leaving
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active FClientReadThread.freeing
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active FClientReadThread.Freed
19-07-07 01:57:37,2884,DEBUG,All,TClientEventThread.Execute ,Close confirmed
19-07-07 01:57:37,2352,DEBUG,All,TClientWriteThread.Execute ,Close confirmed
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active closed buffer
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active FClientWriteThread.Freed;
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active FClientEventThread.Freed
19-07-07 01:57:37,2824,DEBUG,All,TClient.Destroy,active destroyed buffer

all my firewalls are offline. and i havent got a clue as to how to solve the problem.

[BHKai]

Try updating the client. Download the executable and place it in the ts directory replacing the old file.

[qDreams]

Try updating the client. Download the executable and place it in the ts directory replacing the old file.

Hmm didnt work. just noticed though when i run teamspeak it says disconected in the buttom left before i even try to connect to a server.

[qDreams]

ok this makes absolutely no sense to me.. all i did was switch my route firewall back on, and bang! It worked.

[qDreams]

after having been logged onto the server 4 several hour i suddenly time out and the same probem occurs again..


19-07-07 18:19:02,1980,DEBUG,ProcedureInfo,Client Open,host 83.221.145.85 resolved to 83.221.145.85
19-07-07 18:19:02,1980,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 18:19:02,1980,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 18:19:05,1980,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
19-07-07 18:19:12,1980,DEBUG,ProcedureInfo,Client Open,host 83.221.145.85 resolved to 83.221.145.85
19-07-07 18:19:12,1980,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 18:19:12,1980,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 18:19:16,1980,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
19-07-07 18:19:35,1980,DEBUG,ProcedureInfo,Client Open,host server1.teamspeak.dk resolved to 83.221.145.85
19-07-07 18:19:35,1980,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 18:19:35,1980,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 18:19:38,1980,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
19-07-07 18:19:50,1980,DEBUG,ProcedureInfo,Client Open,host 195.242.238.19 resolved to 195.242.238.19
19-07-07 18:19:50,1980,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 18:19:50,1980,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 18:19:53,1980,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
19-07-07 18:20:12,1980,DEBUG,ProcedureInfo,Client Open,host 83.221.145.85 resolved to 83.221.145.85
19-07-07 18:20:12,1980,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 18:20:12,1980,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 18:20:15,1980,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
19-07-07 18:20:36,3564,WARNING,All,procedure TDICallBack.execute,"The operation had no effect." or "The device buffer overflowed and some input was lost." or "The device exists but is not currently attached." or "The change in device properties had no effect."
19-07-07 18:21:10,1980,DEBUG,ProcedureInfo,Client Open,host 83.221.145.85 resolved to 83.221.145.85
19-07-07 18:21:10,1980,DEBUG,ProcedureInfo,Client Open,Send LoginStep1
19-07-07 18:21:10,1980,DEBUG,ProcedureInfo,Client Open,Waiting for LoginStep2
19-07-07 18:21:13,1980,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait