PDA

View Full Version : Server problem people cant log in

petey243
20-07-2007, 22:11
i have had my server running for a couple of months now until today my internet went weird and the server idnt work but now the internet works fine. but i can log in to my server on the internal IP but no 1 can find it on the external its says the server may be offline etc... please help i have people from Flight simulator waiting for my server to start running reply ASAP.
BHKai
20-07-2007, 22:20
Make sure that your external ip did not change.
petey243
21-07-2007, 00:21
it did not change it still is 82.43.42.217.thats wat its says on my ip list when u right click server
BHKai
21-07-2007, 01:18
Check www.whatismyip.com.

Then check your port forwarding settings in your router settings.
petey243
21-07-2007, 08:13
i have i no my ip its the same as it was the only thing that changed was my internal it went from 192.xxx.x.2 to 192.xxx.x.3 and now my teamspeak and fshost wont work
BHKai
21-07-2007, 08:51
Check www.whatismyip.com.

Then check your port forwarding settings in your router settings.

Don't read too fast.
petey243
21-07-2007, 19:55
kk soz but i have also opened all the prots i need but incase i got them rong could ou please tell me them again
Katana*GFR*
21-07-2007, 20:41
you might have opened the ports, but you have to tell the router to which IP they need to be broadcasted.
petey243
21-07-2007, 22:03
how do u do that i have opened the required ports in my router menu and i have doe the planet teamspeak test and all are green except for the UPC Ports they are all red and the port 8767 is open on every firewall and prevention system i have
BHKai
21-07-2007, 22:59
how do u do that i have opened the required ports in my router menu and i have doe the planet teamspeak test and all are green except for the UPC Ports they are all red and the port 8767 is open on every firewall and prevention system i have

Makes sure that it is open for udp 8767 and not for tcp 8767
petey243
21-07-2007, 23:22
Makes sure that it is open for udp 8767 and not for tcp 8767

i have done that on my windows firewall and my router but it doesnt give me the option to open either a UDP or TCP
BHKai
22-07-2007, 01:10
What kind of router do you have?
petey243
22-07-2007, 09:32
i have a netgear MR814
BHKai
22-07-2007, 20:57
It seems that it does not matter that it just forwards any protocol using that port number. If it is not your router then it would have to be your firewall.
Jass1989
01-08-2007, 00:02
You can Fellow these Instruction on this Webpage about port fowarding
http://portforward.com/english/routers/port_forwarding/Netgear/MR814/TeamSpeak.htm
I home this Helps. You can still cannot Get it COntact me via XFire: Jass1989