smoere
24-08-2007, 19:28
hi community!
i tried to set up ts on my debian lenny but w/o a good result.
initally some informations about my sound-card:
lspci | grep audio
00:0b.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
lsmod | grep snd
snd_cmipci 30496 0
snd_pcm_oss 46112 0
snd_mixer_oss 16576 1 snd_pcm_oss
snd_pcm 77704 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 9992 1 snd_pcm
snd_opl3_lib 9600 1 snd_cmipci
snd_hwdep 8480 1 snd_opl3_lib
snd_mpu401_uart 6656 1 snd_cmipci
snd_seq_dummy 3652 0
snd_seq_oss 28992 0
snd_seq_midi 8480 0
snd_seq_midi_event 6592 2 snd_seq_oss,snd_seq_midi
snd_seq 44752 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 21444 3 snd_pcm,snd_opl3_lib,snd_seq
snd_rawmidi 22688 2 snd_mpu401_uart,snd_seq_midi
snd_seq_device 8012 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_mid i,snd_seq,snd_rawmidi
gameport 14024 4 snd_cmipci,ns558,analog
snd 48740 12 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_o pl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_ seq,snd_timer,snd_rawmidi,snd_seq_device
soundcore 8992 1 snd
cat /proc/asound/cards
0 [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 193
here is what i did so far:
i installed ts (ver 2. 2.0.32.69) via apt-get.
when i connect to a server, ppl in the channel are not able to hear me.
although i can hear myself in my speaker (even with the "local test mode" deactived) - so i presume that my mic is working (and all setting that could be done via "alsamixer" are set up correct) and the green light infront of my name is lit (?) when i press my "push to talk" button.
whats the problem, that other ppl cant hear me?
here are some sound setting from ts:
test codec: celp 5.1 kbit (tried some other as well with the same result)
sound driver: default (oss /dev/dsp) - setting some other wont work at all
i even forwarded the upd port (8767) from my router to my pc.
can anyone help me?
note: i dont wanna have ts-sound and sound with another app (i.e. a game) - i just wanna be able to talk over ts ;P
greetz
pita
edit: i tried to record the input of my mic via ts.
first it seems that a file was successfully created, but when i try to listen to it (via "play") theres no output, even if the file a lenght <> 0 byte (minutes)
i tried to set up ts on my debian lenny but w/o a good result.
initally some informations about my sound-card:
lspci | grep audio
00:0b.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
lsmod | grep snd
snd_cmipci 30496 0
snd_pcm_oss 46112 0
snd_mixer_oss 16576 1 snd_pcm_oss
snd_pcm 77704 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 9992 1 snd_pcm
snd_opl3_lib 9600 1 snd_cmipci
snd_hwdep 8480 1 snd_opl3_lib
snd_mpu401_uart 6656 1 snd_cmipci
snd_seq_dummy 3652 0
snd_seq_oss 28992 0
snd_seq_midi 8480 0
snd_seq_midi_event 6592 2 snd_seq_oss,snd_seq_midi
snd_seq 44752 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 21444 3 snd_pcm,snd_opl3_lib,snd_seq
snd_rawmidi 22688 2 snd_mpu401_uart,snd_seq_midi
snd_seq_device 8012 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_mid i,snd_seq,snd_rawmidi
gameport 14024 4 snd_cmipci,ns558,analog
snd 48740 12 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_o pl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_ seq,snd_timer,snd_rawmidi,snd_seq_device
soundcore 8992 1 snd
cat /proc/asound/cards
0 [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 193
here is what i did so far:
i installed ts (ver 2. 2.0.32.69) via apt-get.
when i connect to a server, ppl in the channel are not able to hear me.
although i can hear myself in my speaker (even with the "local test mode" deactived) - so i presume that my mic is working (and all setting that could be done via "alsamixer" are set up correct) and the green light infront of my name is lit (?) when i press my "push to talk" button.
whats the problem, that other ppl cant hear me?
here are some sound setting from ts:
test codec: celp 5.1 kbit (tried some other as well with the same result)
sound driver: default (oss /dev/dsp) - setting some other wont work at all
i even forwarded the upd port (8767) from my router to my pc.
can anyone help me?
note: i dont wanna have ts-sound and sound with another app (i.e. a game) - i just wanna be able to talk over ts ;P
greetz
pita
edit: i tried to record the input of my mic via ts.
first it seems that a file was successfully created, but when i try to listen to it (via "play") theres no output, even if the file a lenght <> 0 byte (minutes)