PDA

View Full Version : Simple way to setup Teamspeak Server for you and your friends


toonarmy
05-05-2008, 14:11
Note: This guide assumes that you know how to get the server running, but not how to get others to connect to it. If you do not like Hamachi or don't want to use it to allow others to connect to your teamspeak server click the back button now.

Just a quick and simple guide to help you and your friends all get on teamspeak without port forwarding and is done with a lot of other games and stuff. Some of you are probably familiar with Hamachi and others of you are not... thats what we'll be using... So if you do not like using Hamachi or its just not for you then go ahead and click the back button. If you don't mind using hamachi then keep reading.

First of all you will need to have Hamachi installed which is easy, you can download it at their website www.hamachi.cc make sure when installing to install the free version not the premium version.

Once hamachi is installed make a network call it what you want and give it a password, and tell your friends to get on that network, whenever they want to be on teamspeak they must also be on the same hamachi network as you.

so now what you need to have them do is open up teamspeak and for server address they should put in the IP it shows you as which for example is 5.32.285.149 but if you just installed the teamspeak server and DID NOT change the UDP port they need to add 5.32.285.149:8767

Then all they have to do is put in the server password and their nick name to log on to the teamspeak server. Just as a final word, if you are on the host computer you still type localhost:8767 as the server address.

If you have any problems post :D Hope this helps some of you