PDA

View Full Version : Yes, another IP question

TSNEW
15-02-2009, 01:12
Read the FAQs read it all, read everything. I am using a router, I have tried a lot of different things. I tried to have my friend connect using my WAP, nothing, error..Opene the ports, restarted, had him try again, nothing. Did the teamspeak test.com or whatever and they all came up failed. Dont know whats going on.
tctransporter
15-02-2009, 03:01
If you right click on the TS Server icon by the clock do you get 2 diff IPs? Also are you able to connect to it?
TSNEW
15-02-2009, 03:04
I can connect, It says 1 IP.
tctransporter
15-02-2009, 04:08
If it just shows one Ip then I believe that's an issue with ports. Double check to make sure you have your ports open correctly.

Also can you paste the results from the TS Connection test? Also make sure the firewall on your PC is allowing the TS to connect to the internet.
tctransporter
15-02-2009, 04:11
If it just shows one Ip then I believe that's an issue with ports. Double check to make sure you have your ports open correctly.

Also can you paste the results from the TS Connection test? Also make sure the firewall on your PC is allowing the TS to connect to the internet.

EDIT: You can try to configure the TS with different ports then the defaults, you can do so by editing the .ini file in the TS folder.
TSNEW
15-02-2009, 05:18
Step 3 - Perform the Tests
Performing UDP test...

ERROR = FAIL

» Establish a connection with the server ERROR 3
» Verify that it is a TeamSpeak 2 server ERROR 3
» Perform connection handshake ERROR 3
» Retreive a list of active channels ERROR 3

Performing TCP test...
» Establish a connection with the server ERROR 1
» Verify that it is a TeamSpeak 2 server ERROR 1
» Retreive the servers global information ERROR 1

Performing HTTP test...
» Establish a connection with the server ERROR 1(X)
» Verify that it is a TeamSpeak 2 server ERROR 1(X)
» Retreive the servers version information ERROR 1(X)
TSNEW
15-02-2009, 05:44
Tried messing with a new port and didnt work either.
ANR Daemon
15-02-2009, 06:35
The service that were offering you world IP inside TS rclick menu has been disabled due to overloading.
Use hosts like whatismyip.com, checkip.dyndns.com, also http://ts2test.planetteamspeak.com will tell you your external address.
TSNEW
15-02-2009, 08:17
I know the IP addresses but nobody can connect to them, i think i am doing something wrong witht he ports, ill work it out tomorrow.
Miscni
15-02-2009, 16:34
Well I ave the same problem... But people can connect to my Teamspeak Server.

But I can only see my Internal IP, my Externel doesn' show at all.

All my ports are open in Router (Linksys) crappy router.
and all my ports is also open in my firewall

when I did the Test at http://ts2test.planetteamspeak.com

it tells me for some reason, the failure is error 2:

» Perform connection handshake ERROR 2
» Retreive a list of active channels ERROR 2

The UDP test could establish a connection to the specified TeamSpeak server, but was unable to perform all requested operations.

Possible reasons:
1. Your server is protected by a password.
2. The TeamSpeak 2 Connection Test is using a nickname, which is not allowed on your server.

But everything else, works like a charm.

But I was thinking, if it could have anything to do, with the server.ini, but i'm just asking.

Cheers mateys
TSNEW
15-02-2009, 20:00
nm found the router
TSNEW
15-02-2009, 20:42
Just about had it with this crap. Cant even get my static IP to forward the ports now.
TSNEW
15-02-2009, 21:25
Someone else im my house is running a TS server some days as well, could that be causing a problem?
ANR Daemon
16-02-2009, 04:49
It shouldn't be an issue unless you trying to run two server on the same host.
Regarding your connectivity issues, check out this topic: http://forum.teamspeak.com/showthread.php?t=37522
Tomas
17-02-2009, 13:59
familiar to http://forum.teamspeak.com/showthread.php?t=44394 thread
RonnieBrown
01-03-2009, 20:55
Hi I am no expert but if port forwarding is the problem then try this link
for some help
http://www.portforward.com/english/routers/port_forwarding/routerindex.htm

Hope it helps
Miscni
13-03-2009, 21:29
Hi I am no expert but if port forwarding is the problem then try this link
for some help
http://www.portforward.com/english/routers/port_forwarding/routerindex.htm

Hope it helps

I tried it matey...

But no luck... :confused:

The Funny thing is, that if I switch over to my "Level 1" Router, then I have no problems.

Even my DMZ is activated.

But I'm trying something in servers.ini, but i'll let you know, if it works..

cheers