Setting up ts on new computer

[ms_empyreal]

New computer, same IP addy.

Is there a tutorial on how to get everything transferred over to the new computer? Friends are getting "maybe the server isn't running" error when they attempt to login.
I do have internet on both comps. I did shut the older computer down, in hopes of redirecting friends to server on new computer, to no avail.

Ran the test Results and they are
The UDP connection test finished with warnings!
The UDP test could establish a connection to the server, but was unable to perform all requested operations.
Possible reasons:
1. Your server is protected by a password.
2. The TeamSpeak 2 connection Test is using a nickname, which is not allowed on your server.

The TCP connection test finished without errors!

The HTTP connection test finished without errors!



For ref, at the moment, there is no pw on the server.

[BHKai]

Copy the server.db and the server.ini file from the old one and transfer it to the new pc. Make sure that you set up the firewall exceptions also. If the ip address is the same then you should not have to reconfigure the port forwarding settings.

[ms_empyreal]

Files moved, in fact i moved the entire folder to the new computer so I have all my old settings however, friends still can't connect. Found a strange "issue"

From my router page, My IP is showing as 192.168.5.100 but when i right click the server icon and look at my ip it shows as 192.168.2.18. That is the only ip that shows and I thought there were two. Checking the log I found this.

-------------- log started at 11-04-09 19:27 -------------
---------------------------------------------------------------
11-04-09 19:27:34,ALL,Info,server, Server init initialized
11-04-09 19:27:34,ALL,Info,server, Server version: 2.0.23.19 Win32
11-04-09 19:27:34,ALL,Info,server, Starting VirtualServer id:1 with port:8767
11-04-09 19:27:34,ALL,Info,server, Started VirtualServer id:1 with port:8767
11-04-09 19:27:34,ALL,Info,server, Server init finished
11-04-09 19:27:49,ERROR,All,frmMain, unable to detect external ip

Not sure if that will help resolve the issue but I thought it may be worth posting.

[ANR Daemon]

It's a nonissue. Just ignore it.

[Tomas]

start - Run ...type cmd confirm(ENTER) it
in black window type ipconfig and confirm it
what(IPs) do you see from there(screenshot)?