Error message on connection

[PioLo]

Hi m8s,

I have some connection problems with RC2 under XP.

I receive this error message
07-04-03 19.22.24,584,ERROR,ProcedureInfo,Client Open,Exception: Timeout on recv LoginStep2 wait
while i try to connect with all server of ts running the RC2 version.

I have this problem since almost a week, first it worked fine; i dont made hdware or software changes :(

I have to try to connect many times to a server to have a good response.

How can i do?

Tnx for answerS :)

PaoLo

[Judas]

If you really havent changed anything in your hardware/software your internet-connection might temporarely be bad. Have you ever tried pinging the server or doing a traceroute on it to figure out if you get high packet loss?
Packet loss can cause problems during connection as well as when you are on the server.

[PioLo]

I have the same problem browsing the UT favorites..........i cant ping server but i can get in typing the ip.................

This a tracert to my ts server....................


Rilevazione instradamento verso 62.207.135.99 su un massimo di 30 punti di passa
ggio

1 8 ms 9 ms 7 ms 5.255.176.1
2 7 ms 7 ms 7 ms 10.0.145.235
3 9 ms 9 ms 8 ms 213-156-56-130.fastres.net [213.156.56.130]
4 8 ms 7 ms 7 ms 10.254.0.197
5 12 ms 12 ms 12 ms 213.140.31.133
6 17 ms 12 ms 13 ms 213.140.31.213
7 13 ms 17 ms 12 ms blixer-mix.mix-it.net [217.29.66.48]
8 13 ms 13 ms 13 ms 213.88.60.54
9 49 ms 57 ms 33 ms 213.145.0.37
10 * * * Richiesta scaduta.
11 17 ms 17 ms 14 ms 62.207.135.99



And this a ping

Esecuzione di Ping 62.207.135.99 con 32 byte di dati:

Risposta da 62.207.135.99: byte=32 durata=14ms TTL=54
Risposta da 62.207.135.99: byte=32 durata=12ms TTL=54
Risposta da 62.207.135.99: byte=32 durata=13ms TTL=54
Risposta da 62.207.135.99: byte=32 durata=13ms TTL=54

Statistiche Ping per 62.207.135.99:
Pacchetti: Trasmessi = 4, Ricevuti = 4, Persi = 0 (0% persi),
Tempo approssimativo percorsi andata/ritorno in millisecondi:
Minimo = 12ms, Massimo = 14ms, Medio = 13ms

Rilevazione completata.

So probably its my connection fault.......

The error message is a timeout: its possible to force the client to wait longer 4 a server reponse??? :p

PaoLo :)