Search:

/me support the idea of free beer....

Anyone willing to provide it??

Your right.....

TeamSpeak is Freeware for non-commercial use..

However you should get your facts straight. Freeware means something else then GPL.. Open Source software under the GPL license is...

We're already working on it ;)
Should be up around the time TS2.0 is out :)

You can find out by reading the news items on the main page ;)

did you try it with both Wave and Direct Sound?

It returns your external (internet) ip adress. (it might return the ip adress of your proxy if you're using one, but it shouldn't do that)

Ok, so for the 2nd time..

just visit: http://www.whatismyip.com

:) can't get any easier then that to find out your ip adress..

You can't in TeamSpeak 1..
You'll have to wait until TeamSpeak 2.0 is released

Moved it to TeamSpeak 1.X support section :)

TeamSpeak V2.0 has full support for Command line startup and Webbrowser launchability (sounds funny :))

Unfortunatly we have to eat too and therefor have to work for a living. This means TeamSpeak is completely written in our free :(

Gameserver provider only have to pay between 0.63 and 2.00 euro a...

This is known problem, turn off your numlock key and it should be working alright ..

:)

ohja, the awefull "What you hear" feature of Creative.. :)

also there is a bug with Microsofts DirectX and Creative's audigy... You might have to set the Sound Hardware acceleration to low......

I have a speed touch ADSL modem, it uses is (by default) set to pppoe.. which means my server connects to the internet using the speed touch modem.. not sure if thats the same you have..


I also...

..mzz me thinks..

start server..... start client...
set wave out as microphone in... use voice activation..


tadaaa :) you hear everything on server 2 that is said on server one..

lol.....

Well you can select Wave and Direct sound as methode to output sound.. by default TS uses Wave .. (better quality/speed) however for some games it is required to run TeamSpeak in DirectX mode..
...

Does this problem occus in Direct(X) Sound aswell as wave? .. Some people have to run TS in Direct Sound if they use CS

Are you using the latest drivers (or the drivers before that, the latest for...

So you have installed DirectX 8.1? (or reinstalled it)

Because this error normally means you don't have DirectX 8.1 installed (correctly)

try disabling the build in voice comm and CS and see if that helps

The solution is very simple, you go and read the FAQ

;)

Hi,

Well it means:

1) he entered the wrong ip and/or port number

2) his firewall is blocking the UDP/TCP traffic

If he is using Zone Alarm, then disabling the firewall isn't going to be...

You could try to put both computers in the dmz to see if that helps

I did a search on the forums and found several answers to this questions..
1 of them is:

http://www.teamspeak.org/forums/showthread.php?s=&threadid=268

Try it out.. if it doesn't work you...

I'm not sure what it is called, but it sounds correct yes.

We've talked to some people who's provider limited the threads to a fixed number, so after 5 people joined all the threads where used up...

Maybe the ISP has a maximum thread (or process, not sure how you call it, i'm no linux guy) ..each client that connects take up 1 or 2 threads, if your isp has it limited to 8 then you might only...

We've been asked about opening up the source several times and answered those already, we didn't see a need to answer it again..

but to answer your question.. we aren't going open source because...

Works perfectly :)
(hey its designed by UT fans, what did ya expect)

Please post tested games as:

[TS Version] - [FULL GAME + Version] - [OS]

for example:


[TS 1.5] - [Counter Strike 1.5] - [WinXP]

What router do you have?
Its easier to tell you how to set your router correctly if we know which one you use :)

If you give people your IP number you should give them the external ip address...

Hi,

Make sure you set the firewall to allow the traffic to come to your TS Server..

Open ports TCP: 8765 and UDP: 8766


and If your Server has an internal ip address and not an external ip...

If you have numlock turned on you will have to turn it off.

This should fix your problem

That would be great, please include a nice Manual for people on how to set it up and we'll put it in our Download Section (with your permission ofcourse)

If users can connect and talk at the server but timeout after a while then it is really the timeout issue and you'll need to increase the timeout setting on the router or put the server in the DMZ...

Maybe someone can post there exact ZoneAlarm Pro rule which they use for TeamSpeak?

(not sure if you can manually enter these for ZoneAlarm Pro, i never used it)

Well i didn't really mean it as a solution, but more of a known problem with ZoneAlarm :(

You could ofcourse go and use AtGuard instead :)