Community Forums Today's Posts     Member List     Archive    
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2002
    Location
    London
    Posts
    2

    Please Help Me!!! Opening Ports On a Dlink 504

    Hi All

    I have Just Recently Got a Dlink 504 Router.

    I cant Figure out how to get RC2 Server To Work Propely, I have opened the Port 8767 in my Dlink 504 Router for the IP of the Machine that is hosting it, however i cant connect with TS Client with my InterNet IP.

    I have 2 Computers.

    The Dlink Router IP : 192.168.0.1
    System Hosting RC2 : 192.168.0.2
    Other System Joining RC2 : 192.168.0.3

    I have an InterNet IP Which is Static. Lets Call This for example .... 50.50.50.50 (Example Only! )

    So I have Opened the Dlink Config And Told it to "Port Redirect"
    8767 UDP to 192.168.0.2 (Host). Reset The Router Hosted the Program. It also Says when i right Click on the TS Server Icon in your IP's Section my Internet ip and Lan IP.

    I then would try to connect with machine 192.168.0.3 to the Internet IP 50.50.50.50 And it would say "No Reply From Server , Maybe The Server is not Hosting e.t.c"


    I am Running XP Have XP firewall Turned Off.

    If there are Some Dlink Users Out Here And have managed to Host TS I would like to talk to you very Much, over MSN perhaps.

    So Please Tell Me What Am I Doing Wrong?????

    Thanks

    [BUKWIT] XenShocker

    Bukwit mohaa
    Last edited by XenShocker; 26-03-2003 at 15:47.

  2. #2
    Join Date
    Aug 2002
    Location
    Haydock
    Posts
    73
    To connect to the host from 192.168.0.3 dont use the Internet IP (External) you need to use the internal ip when behind a router i.e. 192.168.0.2.

    Only people outside of you network will connect using the external ip.

  3. #3
    Join Date
    Nov 2002
    Location
    London
    Posts
    2
    Yeah Wicked It Worked!


    Bit Stupid that the Router Doesnt Let you out of your Lan Then Back Again....

    Thanks Any Way

  4. #4
    Join Date
    Oct 2002
    Location
    California
    Posts
    256
    I believe some allow this (called loopback), but mine doesn't (Netgear FR314).

  5. #5
    Join Date
    Aug 2002
    Location
    Switzerland
    Posts
    8,182
    @XenShocker:
    actually it is stupid to connect to the router IP interface and then mirror the traffic back to the LAN
    It seems that a few router can handel this, but for sure it is not the ideal way to do it. It's allwys better to use the IP in the same subnet if this is possible (in your case it is cause server and host are in the same subnet).

    have fun with TS

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. opening up ports
    By aceman19692004 in forum [TeamSpeak 2] Client Support
    Replies: 2
    Last Post: 15-05-2009, 12:40
  2. Need help with opening ports on D-Link 524
    By CyberSphere in forum [TeamSpeak 2] Server Support
    Replies: 16
    Last Post: 23-10-2006, 02:39
  3. Opening up ports in firewall not working
    By Vash in forum [TeamSpeak 2] Server Support
    Replies: 23
    Last Post: 09-01-2006, 08:28
  4. Opening ports for a Linksys wcg200-cc
    By Midgit4life in forum [TeamSpeak 2] Server Support
    Replies: 0
    Last Post: 31-07-2005, 06:20
  5. Opening ports not working
    By Badkarma in forum [TeamSpeak 2] Server Support
    Replies: 2
    Last Post: 18-02-2005, 13:34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •