[Mini Tutorials] Virtual Server Management

[Birdie]

Is it possible that there isn't a serveradminquery group on a 2nd server?
I try the following:
use sid=2
servergroupaddclient sgid=9 cldbid=15

with error: error id=2560 msg=invalid\sgroup\sID

Correct. There is only one serveradminquery group on each physical server which will grant access to all virtual servers. Check the available groups for each virtual server with a code like this:

use 2
servergrouplist

[Jeanluc]

Hello, I tried but I do not arrive there...

login serveradmin ********
use sid = 1
servergroupaddclient sgid = 2 cldbid = 2

Here is the error message :

Error ID = 0 msg = OK (21 ms)
Error ID = 0 msg = ok (6 ms)
Erreur id = 1024 msg = invalide \ sserverID (5 ms)
Total: 32 ms

If anybody can say to me what I did not make decently ??? : Mad:: mad:: mad:

[Der_Pate]

Hello

I try to chance my max clients on the server.

the output what i get is.

error id=0 msg=ok (51 ms)
error id=0 msg=ok (47 ms)
error id=0 msg=ok (45 ms)
Total: 143 ms

If i look at my server there is still standing max clients: 32
What do i wrong?
I used the code that you can read above.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
I have found mij problem tnx
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Greets.

Did you get a Licence ?

https://sales.tritoncia.com/

then u take Teamspeak 3 Non-Profit Licence

After that it will works

[randomkid88]

Hello, I am using the ServerQuery trying to see if it is possible to change the server ports. After I login, I put in:

serveredit virtualserver_port=xxxx

and get

error id=1024 msg=invalid\sserverID

I have tried doing sid=1 after serveredit, doing "use," with no luck. Is it a syntax issue, or is it not possible?

[ANR Daemon]

1. Login
2. Use sid=1
3. serveredit ...

[BlackKnight]

Hi I still can't get it. I have followed your instructions nut can't find where to create it on the TS 3 client areas. Boy I must be dumb! Can you in lighting me more to actually where I need to create it cause, I went the TOOL>ServerQuery, but I didn't see where it say to create a virtual server. HELP PLEASE!.

[k69random]

My old port might be causing problems. It was suggested that we change the ports. Anyone know how to do it.?

[Pepparon]

Hello,
I have a problem ;-)
I have now managed it on my TS3 Vserver under debian lighttpd to install and to get to the run.
The default port 9987 I get does not last!
Even during installation I have in the Voice Port ts3server.ini as the desired specified 8767 Can connect only through the default port 9987??
Even a change in the ts3server.ini of Putty in the vi editor did nothing ....
Have now searched the internet but find no solution, you are my last hope ;-)
With best 'Regards Pepparon

[khatyr]

I need help. I found the serverquery ... but I can't click on the serverquery. PLZ HELP

[LadyLina]

servercreate virtualserver_name=My\sSecond\sServer virtualserver_port=1337 virtualserver_maxclients=128

__________________________________________________ _________________

error id=257 msg=unable\sto\sbind\snetwork\sport



kann help my ?

do you still run an older version off teamspeak on that port

make sure your port is free and open

[sevvlor]

ive tried to use this tutorial but it doest work!! i keep getting errors and it WONT
start a second server. and i use a licence but still it refuses! can some one help me?

[TheMinz]

@ sevlor, the commands listed in this tutorial are not suited for copy paste. Every second line is a return message from the server, also there is a double entry for virtualserver_port which should be removed.

The correct command sequence to create a server via Query/Telnet should be :

login serveradmin password
servercreate virtualserver_name=My\sSecond\sServer virtualserver_port=1337 virtualserver_maxclients=128 sid=2 token=ddqCmka21sXaE+0zjnFHFQsqMJ832Boc6SSdECXe

(Values in red need to be edited)
Also note that this has been covered in many other threads.

If it still does not work, post your error message.

[adeward]

Good:

I opened another post recently and seeing that people do not know if I understood. I open this explaining what I look and see if anyone can help me.

I recently delivered the 512 Slots free license for 1 or 10 TS3. The first TS3 and opened it by double clicking the executable exe server. Now I want to open another TS3 to another part of the multysquad. I would like someone who could explain it to me, to create a TS3 with 250 slots and one with another 250 slots.

A greeting and thanks in advance.

And tried to make the manual that you explain right here, but I get error all the time.

This error:

"TS3
login xxxxxx jVZxfw9J
servercreate virtualserver_name=mysecondserver virtualserver_port=9999 virtualserver_maxclients=250
sid=2 virtualserver_port=9999 token=ufo22/0aGRZKj4tsSPNUhFZZ9uD5A52dCQCaUMuP
error id=0 msg=ok"

error id=3329 msg=connection\sfailed,\syou\sare\sbanned extra_msg=you\smay\sretry\sin\s297\sseconds (35 ms)
Total: 35 ms

[blas1]

hi

i've created a new vserver via putty, my old is on 9987.

2010-07-16 08:39:31.308418|INFO |VirtualServer | 3| listening on 0.0.0.0:9988
2010-07-16 08:39:31.309199|INFO |VirtualServer | 3| client 'server'(id:0) added privilege key for servergroup 'Server Admin'(id:12
2010-07-16 08:39:31.329772|INFO |VirtualSvrMgr | | addServer() VirtualServer(3) started

and icant connect it
<10:40:47> Failed to connect to server

any idea?

[nixbree]

Hello

I have a linux 64 bit dedicated server but I am having problems setting up more than one virtual server on it is there any way I can get a detailed tutorial on how to do it ?