Cannot start the server

[schiri22]

Heyho,

When I would start a server I'll use this command

serverstart sid=5

But I get this error message

error id=1031 msg=server\sis\svirtual

Any help??

[Cheech]

Hi schiri22,

ich würde die empfehlen die Doku zu lesen und den server so zu staren wie es gedacht ist....

Gruß
cheech

[schiri22]

Hi schiri22,

ich würde die empfehlen die Doku zu lesen und den server so zu staren wie es gedacht ist....

Gruß
cheech

Hi Cheech,
folgendes steht in der Doku:

SERVERSTART
Starts the virtual server specified with sid. Depending on your permissions, you're able to start either your own virtual server only or all virtual servers in the server instance.
Permissions:
b_virtualserver_start_any b_virtualserver_start
Syntax:
serverstart sid={serverID}
Example:
serverstart sid=1
error id=0 msg=ok

Genau das mach ich ja, nuir dann kommt der Fehler.

[Cheech]

Ja du bist in der Server query doku schau doch mal in die Quickstart.txt.

gruß
cheech

--------------------------
(6) Commandline Parameters
--------------------------

Commandline parameters are passed to the TeamSpeak 3 Server using the form:

ts3server_<arch> <parameter1>=<value1> [<parameter2>=<value2>] ...

Important: All commandline parameters passed to the server need to be escaped
using the ServerQuery escape patterns (check the ServerQuery manual for details).

Example:
$ ./ts3server_linux_x86 clear_database=1 create_default_virtualserver=0

Commandline parameters are not saved over sessions, so if you passed paramaters
when starting the server process, you need to pass them again the next time. If
a parameter is not specified, the default value will be used, regardless of
parameters specified during a previous server start.