Cant Connect to Server

[Hyperion2]

I cant connect to my TS3 server, i dont know why.

The Server is working without any problems, i can connect with localhost.

With another PC in my Home Network, i can connect with the network IP to the TS3 server.
Because of that I think the problems lies behind the router/modem.
Ports are opened and anything...
For example, the TS2 Webinterface is reachable from others.

Any ideas?

Router = fritz box 5140

[poisonpanik]

What IP are you using to connect to it? You need to use your LAN IP. Probably starts 192.168.x.x

[Hyperion2]

Ok probably you misunderstood me, other people cant connect to my teamspeak3 server i can.

[poisonpanik]

You need to forward the TS3 ports so the outside world can see you

http://portforward.com/

Use these ports instead of the example ports

Default voice port (UDP): 9987
Default filetransfer port (TCP): 30033
Default serverquery port (TCP): 10011

[Hyperion2]

As i have written the ports already are forwarded and nobodoy is able to connect to it.

[poisonpanik]

PM me your server info and I'll try to connect. (sorry, i missed the mention about the ports. Not quite awake yet today)

[grim1984]

I also have this problem if I get a solution I will post it...


Check out my post under Teamspeak Server ports

[ShadowBrooks]

My Server has been up since January, with very few problems. One that just came up is that some users have to try and connect multiple times before they connect.

Though other users it has always worked on the first try. I am wondering if its just the router. I had only the 9987/9988 ports forwarded.. just added the TCP ports, to see if anything changes.

[poisonpanik]

@ShadowBrooks

See if what grim1984 posted here works for you.

http://forum.teamspeak.com/showthread.php?t=52756

[THEBIGPOTPLANT]

im having same issue however from this it seems that my UDP is locked
this is CMD netstat -a


UDP THEBIGPOTPLANT:microsoft-ds *:*
UDP THEBIGPOTPLANT:isakmp *:*
UDP THEBIGPOTPLANT:4500 *:*
UDP THEBIGPOTPLANT:4717 *:*
UDP THEBIGPOTPLANT:9987 *:*
UDP THEBIGPOTPLANT:1900 *:*
UDP THEBIGPOTPLANT:44301 *:*
UDP THEBIGPOTPLANT:netbios-ns *:*
UDP THEBIGPOTPLANT:netbios-dgm *:*
UDP THEBIGPOTPLANT:1900 *:*

[ShadowBrooks]

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Drew>netstat -a

Active Connections

Proto Local Address Foreign Address State

TCP 0.0.0.0:10011 Drew-PC:0 LISTENING
UDP 0.0.0.0:9987 *:*
UDP 0.0.0.0:9988 *:*



So Should it say Established? or just Listening. Also should I change the server from 0.0.0.0 to an actual ip?

Some people can connect first try while others take 2 or more.