Can't connect to server.

[Awfa96]

There is this server I want to connect to but for some reason, I am the only one that can not connect to it.

However, it will work if I remove the router out of the equation by directly wiring my computer to the modem. But, I need to have the router since other people use the internet at my house.

I have port forwarded my router, even tried putting my computer into DMZ with the router. However, it still won't connect through the router. All my Teamspeak client says is "Failed to connect to server".

Any suggestions?

[pillbox1234567]

Make sure DDOS/flood protection is turned off.

[Awfa96]

Make sure DDOS/flood protection is turned off.

I have a Linksys WRT120N at my house. Where is this option?

[PotaBlava]

Hello.

Try disabling "SPI Firewall protection", see the image:
http://screenshots.portforward.com/r...N/Firewall.htm

Greetings.

[Jordi]

Other possibility:
Some routers don't allow connect within his network by WAN IP, just LAN IP

[Awfa96]

Hello.

Try disabling "SPI Firewall protection", see the image:
http://screenshots.portforward.com/r...N/Firewall.htm

Greetings.

I have disabled the SPI Firewall Protection and am still getting a connection error.

[PotaBlava]

I have disabled the SPI Firewall Protection and am still getting a connection error.

Hello.

Well, maintain you this selection and in the end, once you connect to the server, try to enable it as it was.

1) In TS3 Bookmarks, try indicating the server IP instead of the server address name, that means use x.y.z.w instead of address-server.com

2) If the issue persists, in your router try with (Internet access priority is disabled? )
http://screenshots.portforward.com/r...RT120N/QoS.htm

By the way, are you using wi-fi?

Greetings.

[Jordi]

Two more questions:

1- are you the server owner?
2- can you post the client log?

[Awfa96]

I am trying to connect to the server through ip (using server browser) and address name. My laptop is connected through wifi if it matters.

Also Jordi, I am not the owner.

Client log:

5/6/2012 9:21:24 PM		Info	TeamSpeak 3 Client 3.0.6 (2012-04-20 09:14:18)	
5/6/2012 9:21:25 PM	Direct Sound	Debug	setting timer resolution to 1ms	
5/6/2012 9:21:25 PM	Query	Info	listening on 127.0.0.1:25639	
5/6/2012 9:21:28 PM	Windows Audio Session	Devel	DeviceDeleteList::waitForDeletes - enter	
5/6/2012 9:21:28 PM	Windows Audio Session	Devel	DeviceDeleteList::waitForDeletes - leave	
5/6/2012 9:21:32 PM	ClientUI	Info	Qt version: 4.7.2	
5/6/2012 9:21:32 PM	ClientUI	Info	Using configuration location: C:/Users/Anthony/AppData/Roaming/TS3Client/ts3clientui_qt.conf	
5/6/2012 9:21:32 PM	ClientUI	Info	Last update check was: Sat May 5 12:53:39 2012	
5/6/2012 9:21:32 PM		Info	Checking for updates...	
5/6/2012 9:21:32 PM	Input	Info	Input device name: Mouse	
5/6/2012 9:21:32 PM		Info	creating2 0000000002085D10	
5/6/2012 9:21:32 PM	Input	Info	Input device name: Keyboard	
5/6/2012 9:21:32 PM		Info	Update check, my version: 1334913258, latest version: 1334913258	
5/6/2012 9:21:41 PM		Info	deleting 0000000002085D10	
5/6/2012 9:23:58 PM	ClientUI	Info	Connect to server: 98.221.237.255	
5/6/2012 9:23:58 PM	ClientUI	Info	Checking blacklist	
5/6/2012 9:23:58 PM		Info	Trying to resolve blacklist server	
5/6/2012 9:23:58 PM		Info	creating2 0000000002085D10	
5/6/2012 9:23:58 PM	ClientUI	Info	Blacklist check ok	
5/6/2012 9:23:58 PM	ClientUI	Info	Initiating connection: 98.221.237.255:9987 98.221.237.255	
5/6/2012 9:23:59 PM	Windows Audio Session	Devel	DeviceDeleteList::waitForDeletes - enter	
5/6/2012 9:23:59 PM	Windows Audio Session	Devel	DeviceDeleteList::waitForDeletes - leave	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::openDevice-enter	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS Buffer size: 960	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::openDevice-leave	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::startDevice-enter	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::startDevice-leave	
5/6/2012 9:23:59 PM	Windows Audio Session	Devel	DeviceDeleteList::waitForDeletes - enter	
5/6/2012 9:23:59 PM	Windows Audio Session	Devel	DeviceDeleteList::waitForDeletes - leave	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::openDevice-enter	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS Buffer size: 960	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::openDevice-leave	
5/6/2012 9:23:59 PM	PreProSpeex	Info	Speex version: speex-1.2beta3	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::startDevice-enter	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	WAS::startDevice-leave	
5/6/2012 9:23:59 PM	Windows Audio Session	Debug	Got 2 or more rendering spaces in same loop 480 960 480	
5/6/2012 9:23:59 PM		Info	Blacklist server resolved	
5/6/2012 9:23:59 PM		Info	Data sent to blacklist server	
5/6/2012 9:23:59 PM	ClientUI	Info	Connect status: Connecting	
5/6/2012 9:23:59 PM		Info	Data received from blacklist server: 1,	
5/6/2012 9:24:01 PM		Info	deleting 0000000002085D10	
5/6/2012 9:24:04 PM	ClientUI	Info	Connect status: Disconnected	
5/6/2012 9:24:04 PM	ClientUI	Info	Failed to connect to server, want autoreconnect = 0

2) If the issue persists, in your router try with (Internet access priority is disabled? )

What should I do with this option?

WMM Support is enabled
No acknowledgement is disabled
Internet Access Priority is disabled

[PotaBlava]

I am trying to connect to the server through ip (using server browser) and address name. My laptop is connected through wifi if it matters.

What should I do with this option?

WMM Support is enabled
No acknowledgement is disabled
Internet Access Priority is disabled

Hello.

As you can see, we are in 'try and error'. Step by step. Only one change by step.

1) Try disabling WMM support.
http://www.smallnetbuilder.com/wirel...part-3?start=1

2) In 'Advanced wireless settings'
http://screenshots.portforward.com/r...s_Settings.htm
http://ui.linksys.com/files/WRT610N/...s_Settings.htm
a) Disable 'Frame burst'

b) 'CTS protection mode' try with 'none' or equivalent to 'not to use'

Greetings.