Results 1 to 7 of 7
-
22-06-2012, 13:51 #1
-= TeamSpeak User =-
- Join Date
- Jun 2012
- Posts
- 13
Client 3.0.7 Client errors in my log. (RenderDeviceContext)
I have often problems in Clint Log whit Windows Audio Session since clint 3.0.6.
It is also with clint 3.0.7 and the Serverversion 3.0.5 and 3.0.6.
Many of person of my Clan have the same Problem. So I think it is a Bug.
Here a the Clint Log:
This thread was moved inot a new section. It was Off-topicCode:22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times 22.06.2012 14:04:57 Windows Audio Session Error RenderDeviceContext callbackWaits2 wait looped 1000 times
Last edited by dante696; 25-06-2012 at 07:19.
-
25-06-2012, 07:21 #2
-= TeamSpeak Team =-
- Join Date
- Jun 2008
- Posts
- 7,763
Please provide more informations about your system and make sure, that your drivers are up-to date.
What sound cards do oyu all use? And do oyu use a laptop? I can reproduce this on my Laptop sometimes.---------------------------------------------------------
Please don't send me private support questions.
They belong into the forum and maybe other users have these questions/problems too.
TeamSpeak FAQ || What should i report, when i open a client thread? || Report and upload your Crashdump here
NPL License (Registration)
-
25-06-2012, 08:00 #3
-= TeamSpeak Team =-
- Join Date
- Jun 2002
- Location
- Netherlands
- Posts
- 1,196
Thank you for the report. Do you experience any problems with sound? I mean, does it go on and off or anything like that?
Also, I need to know how often this happens and for how long. I mean, does it spam your log and then everything is ok again?Last edited by nwerensteijn; 25-06-2012 at 08:23.
-
25-06-2012, 10:48 #4
-= TeamSpeak Team =-
- Join Date
- Jun 2008
- Posts
- 7,763
I wrote you a private message with the latest client for testing
---------------------------------------------------------
Please don't send me private support questions.
They belong into the forum and maybe other users have these questions/problems too.
TeamSpeak FAQ || What should i report, when i open a client thread? || Report and upload your Crashdump here
NPL License (Registration)
-
01-07-2012, 02:39 #5
-= TeamSpeak User =-
- Join Date
- Jun 2012
- Posts
- 10
Error : Warning RenderDeviceContext: Fresh 3.0.7 client and 3.06.1 server
6/30/2012 7:14:13 PM Direct Sound Warning RenderDeviceContext::int_processData outerLoop proc (2) time: 182 msecs
6/30/2012 7:14:13 PM Direct Sound Warning RenderDeviceContext::int_processData outerLoop proc (3) time: 197 msecs
3.0.7 client and 3.06.1 server Both installed in last 24 hrs.It happened several times on Client start up today even before I added the fixed Vol_control_API_17
It does not spam the log, but has occured about 4 times since I fresh installed to server 3.0.6.1 and client 3.07
Sound quality is good!
OS:XP sp3
sound card info
Name ATI Function Driver for High Definition Audio - ATI AA01
Manufacturer ATI
Status OK
PNP Device ID HDAUDIO\FUNC_01&VEN_1002&DEV_AA01&SUBSYS_00AA0100& REV_1000\5&2AB6EF22&0&0001
Driver c:\windows\system32\drivers\atihdmi.sys (5.00.40001.09, 83.00 KB (84,992 bytes), 7/20/2007 6:40 PM)
Name Realtek High Definition Audio
Manufacturer Realtek
Status OK
PNP Device ID HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020D& REV_1000\4&18CA5B6A&0&0201
Driver c:\windows\system32\drivers\rtkhdaud.sys (5.10.0.6449 built by: WinDDK, 6.14 MB (6,435,432 bytes), 4/30/2010 7:15 AM)
Hope I posted in correct area NEW to TS3 and the ForumsLast edited by Stevelilwildman; 01-07-2012 at 03:01.
-
01-07-2012, 22:05 #6
-= TeamSpeak User =-
- Join Date
- Jun 2012
- Posts
- 13
It is not permanent but at least 1 time every day, if you multiply with people in Channelview is. It's only spam my Log, but Teamspeak working. No crash everthing is fine only the Spam in the log.
@dante696 I will Test it, what you has send me.
My System and of the Most of my Clanmads: Not a laptop but Towerpc white a Realtek Soundcard. Drivers are up-to date
OS: Windows 7 Home Premium.
P.s. Sorry for my English
-
05-07-2012, 08:23 #7
-= TeamSpeak Team =-
- Join Date
- Jun 2008
- Posts
- 7,763
I got some feedback from Budy93 and the problem is solved for him.
---------------------------------------------------------
Please don't send me private support questions.
They belong into the forum and maybe other users have these questions/problems too.
TeamSpeak FAQ || What should i report, when i open a client thread? || Report and upload your Crashdump here
NPL License (Registration)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Client 3.0.7/8 Client errors in my log. (Stale Decoder)
By Diabel200 in forum WindowsReplies: 13Last Post: 26-07-2012, 10:00 -
Client v3.0.0-RC2 Build 14642, Client window size doesn't save
By Quantum Systems in forum WindowsReplies: 0Last Post: 16-07-2011, 19:34 -
Client: Recording errors with new client
By GigaGoose in forum Bug ReportsReplies: 5Last Post: 09-06-2011, 22:03 -
serverquery client muted client[1],client[4],client[5]
By Master_Jochen in forum Server SupportReplies: 8Last Post: 17-02-2011, 17:34 -
[Solved] Client Displaying Errors
By Alcazar in forum Client SupportReplies: 2Last Post: 09-02-2010, 22:10


Reply With Quote
