Server: server Port won't be changed

[willy_sunny]

Thread title was changed, it makes more sense

Assume default port is on 9987 for sid=1

1. use your TS3 client to log in to your server (assume loopback ip 127.0.0.1) ts3server://127.0.0.1:9987

2. login with putty into serverquery

3. Please perform the following commands.

login serveradmin serveradminpassword
use sid=1
serveredit virtualserver_port=9988
serverstop sid=1
serverstart sid=1
serverlist

Note: Replace serveradminpassword with your serveradmin password

And do NOT execute serverprocessstop.

4. observe how the serverlist shows that the virtualserver_port for sid=1 is now listening on 9988

5. use the client to connect to port 9988 ts3server://127.0.0.1:9988 <- fails to connect

6. use the client to connect to port 9987 ts3server://127.0.0.1:9987 <- still listens to the old port.

This is STILL reproduceable in newest server. (Edit: I'm using the windows server, just clear things up)

Yes, I know if I executes serverprocessstop and re-run ts3server, it'd work fine, but as the title says, it doesn't make sense. The virtual server was STOPPED and RESTARTED. Technically, it should listen to new port, but it didn't.

[dante696]

I can not reproduce this :-/

The tab for client 127.0.0.1 does loop the reconnect and tab 2 can connect to server 127.0.0.1:9988
I create a recording for my how to. Maybe i did something wrong

[dante696]

Please watch my how to (VLC recommed here)
Port9988.mp4

Note: you had network problems since i know you. Are you sure your network is set up correctly?
We never could reproduce them.