Cable - Belkin Router ( 3 Computers )

[DIRTBAGS]

If your smart enough to help me ... please reply =)

I have a cable modem.
Going to a Belkin 4 port router
2 computers playing Tribes 2
1 Laptop running the TeamSpeak Server

Computer # 1 on T2 can access the TS on the laptop but cannot hear myself speak.

No one else can access the TeamSpeak server.

I have acess to my router and can make changes to it, just could use some step by step instructions... PLEASE

Thanks!
DIRT

[Solitaire]

I have never actually sat down and configured one of those routers but basically what you need to do is forward the 2 ports TSS uses back to that ip. your other two pc's need to connect to its internal address

[DIRTBAGS]

Belkin was polite enough to walk me through this.

I can enter the TS from the 2nd computer and see that I'm in the room and the computer tells me that the link is activated. But when I talk, it shows a green light and that's good.

Am I supposed to hear myself talk when I do? ,,, cause I do not.

Thanks for the help.

DIRT

[Solitaire]

no you should not hear yourself talk only others will hear you
to make sure everything is operating fine use the loopback test mode before connecting to the server

[DIRTBAGS]

Cool, thanks alot.

DIRT

[DIRTBAGS]

Solitaire,

Sent you a private message, if you could please let me know.

DIRT