Move power does not work in other channel

Hey Guys,

as I am setting my TS up for the use I would need in future, I am today into setting my Channel Groups (Tier 4) up and started with the CA.

The settings for the momentary problem are as followed:

Servergroup Member:

i_client_move_power [ ] [ ] [ ] [75] (grayed out - not given, so no problem in overwriting from Tier 4)
i_client_needed_move_power [60] [ ] [ ] [75]


Channelgroup Channeladmin:

i_client_move_power [60] [75]
i_client_needed_move_power [60] [75]


For some reason I really don't understand why the CA can't move one of the Member Servergroup. Not when the guy is in the CAs channel and also not when he Member is somewhere else.
If I lower the needed move power of the Member Servergroup to [1] [ ] [ ] [75] it is still not working.
If I change it to [0] [ ] [ ] [75] it works fine.
If I take the permission (only granting stays as it is) it works too...

Errormsg like known: <21:58:56> insufficient client permissions (failed on i_client_move_power)

I got several servergroups but the most only have an icon (for my use). I checked the permissions on the permission overview on a few guys and there were only the above explained permissions to move set.

System is server side 3.0.11.3 and client the 3.0.17.

Some ideas? Would be great. I will inform also if I get some news - nothing more to hate as solved but not self as solved replied questions. :)


Oh and sorry for mistakes, over 30°C inside with closed and beclouded windows and around 18h awake are not the best solution for a german native speaker ;)

You can get rid of the grant on channel group altogether, it would allow them to actually change their own and others move_power and needed_move_power respectively.
The reason it's not working is that you need sufficient move power in both the origin and target channel of the move.

Okey
Im in a group called admins. I have a move power of 60. But i cannot move people with needed way lower than mine. Yes i have looked at channelgroups etc. On All it says i have a move power of 60.
It allways says: insufficient client permissions (failed on i_client_move_power)

Its only me, the other clients in the same group can move people so i guess it something wrong with my client???

Please help im lost

You need sufficient move power in both the channel you're trying to move the client out off (ie. the source channel) and the channel you want to move the client in to (the destination channel). If you lack the permission in one of these channels, it'll fail.

I am having the same issue, why is this marked as resolved? There is no answer. I am looking at one of the channels I can move people and the other one which I cannot and they have same permissions.

i_channel_needed_permission_modify_power 30 all channels only permission. Still not working???

Could you please read first? This was answered twice.

Quote:

---

Originally Posted by Chris

The reason it's not working is that you need sufficient move power in both the origin and target channel of the move.

---

Quote:

---

Originally Posted by Chris

You need sufficient move power in both the channel you're trying to move the client out off (ie. the source channel) and the channel you want to move the client in to (the destination channel). If you lack the permission in one of these channels, it'll fail.

---

What you want has 0 to do with any modify power.

I'm just saying all my channels are the same by showing you they all have the same permission.

The higher admin server group has power to move the client anywhere expect this odd channel I made, it is a weird issue.

I have the sufficient move power in the source and target channel! It's only this one channel or when I create channels it gives this error... Doesn't matter how I create the channel.

I'm pretty sure the move permissions for this channel differs for the user who wants to move or should get moved.
This is the only explainable reason.


As mentioned in your other thread(s)
I still miss a permissions overview from source/target user in that chanel.

Quote:

---

Originally Posted by dante696

I'm pretty sure the move permissions for this channel differs for the user who wants to move or should get moved.
This is the only explainable reason.


As mentioned in your other thread(s)
I still miss a permissions overview from source/target user in that chanel.

---

Two files, one of a guest and the other of me trying to move him into the channel which gives me the error.



Side note: I get this error no matter if I make it a sub channel to Room 2 or separate channel under Room 2.

Ok,

It was my mistake for not checking, I had channel admin for that channel and could not move users to or out of it (I was not in the channel when trying to move users). Hope this helps anyone else looking here.

Admins can move people.
I have a group called "Staff" which have i_client_move_power = 70
I have a group called "Dirty Dozen" which have i_client_needed_move_power = 69

However, Staff can not move Dirty Dozen.

I'm guessing the reason why it does not work because you gave no permissions overview.

The user who has the Staff group ha not enough i_client_move_power in source or target channel.
Check via permissions overview in both channels why Staff's is to low.

Quote:

---

Originally Posted by dante696

I'm guessing the reason why it does not work because you gave no permissions overview.

The user who has the Staff group ha not enough i_client_move_power in source or target channel.
Check via permissions overview in both channels why Staff's is to low.

---

We dont have any permissions set for channels to require move power thresholds. Go to Channel Permission, client, admin, i_client_needed_move_power: theyre all grey for channels. We handled everything through server groups. Still having issue. Are there any screenshots that would help convey my issue?

Here is the permission overview for one of the Staff
https://screenpresso.com/=2G9hb

That staff member is assigned 70 Client Move Power via HQ Staff. Nothing, no group, requires more than 70, minus Server Admins. Again, all channels have 'blank' Need Client Move Power.
Here is a user that was unable to be moved:
https://screenpresso.com/=i1JNb

It still makes no sense.

The permission overview is better, but one is missing.
It's important that you check 2nd Lt Padgett's i_client_move_power in both channels (DayZ & shown 160th Detco - ...).

Hello , how to permit any channel admin to move guest users to his room ? I have channel groups like this : "i_client_move_power 75 and i_client_needed_move_power 25 " but whenever someone with channel admin tries to move guest to his room , he just get this error "(insufficient client permissions (failed on i_client_move_power)"

I had this settings before and it worked , but my ts3 hosting made wipe and i had to make server again .
Thanks for help

Ok, so I have given channel admin move power of 50 but they still cannot move guests wit has required of 5 :/

I guess something is broken with permission system after server update to version 3.4.0
I set up move power to admin and the problem is he cannot move only 1 person but can the other guys which is weird.
I don't know why it happens.
As I said something is wrong.
@peanyy try to set up move power 25 to guests.

hopefully this will be fixed soon then I guess? Atleast I am not the only one with this problem I suppose

Nothing is broken.... tested it and it still works as expected.

You can not move a user in or out a channel as long you do not have enough move power in both channels.
In your case the user must own channel Admin in source and target channel and target user must have less or equal needed move power in both channels.

Hello Everyone,
i am interested in how i can make a permissive that a player can only move when in a particular room. something create permision from "channel group", thanks.

User must own enough move power in source and target channel to move user. In your case he must own that channel group in both channels.

I dont understand, how to i set up that and where?

Source channel = the place from user who should be moved.
Target channel = where user should be moved into.


Give user move power in both channels or else he will not be bale to move between them.