This part is described in the readme file or read this post (last paragraph of my post): http://forum.teamspeak.com/showpost....&postcount=486Quote:
Originally Posted by Pilotclan94
The bot may have troubles connecting to the server http://home.arcor.deQuote:
Originally Posted by Pilotclan94
Maybe a firewall or ISP is blocking this.
The other suggestions are interesting, but are currently to complex to track this informations (because the TS3 server do this not).
Hey he show up for a sec however it will still be conneted but
<01:26:28> "Unknown from 192.168.1.52:1965" connected
<01:26:28> "Unknown from 192.168.1.52:1965" disconnected (deselected virtualserver)
How do i fix this ?
I went in and looked for a setting but i did not see any
what is the ip for http://home.arcor.de/ ?
I tryed playing with
# Teamspeak 3 virtual server ID or -1 to use ts3_virtualserver_port
ts3_virtualserver_id = -1
# Teamspeak 3 virtual server port, only needed if ts3_virtualserver_id is set to -1
ts3_virtualserver_port = 9987
# Channel id, the bot will join into it after connecting. If not wanted, use a negative number like -1.
ts3_channel_id = 36
still didnt work
now i just get
<04:38:47> "Unknown from 192.168.1.52:2197" connected
<04:38:47> "Unknown from 192.168.1.52:2197" disconnected (deselected virtualserver)
<04:38:47> Channel group "Guest (8)" was assigned to "Jack[bot]" by DJ's TS3 server
This is absolutely right, the bot just select your virtual server.Quote:
Originally Posted by Pilotclan94
To check if the bot is online, just write
!botinfo
into the server chat or channel chat in the same channel.
If the bot answer you (in a new private message tab), anything is right.
Hmm.. how can i add a serveradmin for these settings?
Code:# Teamspeak 3 server admin account name
ts3_server_login =
# Teamspeak 3 server admin password
ts3_server_password =
If you hosting your own TS3 server, you can just use the serveradmin account shown by the TS3 server at the first start.Quote:
Originally Posted by SeToY
The second way is to create a "ServerQuery Login" from the TS3 client (its better to create an own Identity for this, because the ServerQuery login will be linked with that Identity) and add the permissions that the bot need (look into the bot readme file for this).
Not for sure if this is a bug or not. But in older versions it never spam my log file with
8/5/2010 6:32:57 PM Query Info query from 127.0.0.1:33333 issued: clientlist -away -groups -times -voice
Is this normal or just me. It kind of is annoying since I check my logs alot.
This is the normal logging behavior of the TS3 server. It is nothing I can change. If you do not want to see ServerQuery actions in TS3 server log file, just disable this in your TS3 client at Edit Virtual Server -> More -> Logs -> ServerQueryQuote:
Originally Posted by nipper4369
Hi, i found a strange behavior from the bot.
As i configured the advertising.cfg i put this (3 lines) (name and link edited):
The thing is that the bot will adverstise every 60 min like in the config file but will always adverstise 2 lines instead of only one.Quote:
Serveur Teamspeak 3 fournis gratuitement par xxxTeamspeak\nN'oubliez pas de visiter régulièrement notre site http://www.xxx.com.
L'équipe de xxxTeamspeak est fier de vous fournir ce serveur Teamspeak 3 gratuitement !\nPensez à nous rendre visite sur http://www.xxx.com.
Envie d'un serveur Teamspeak 3 gratuit ? Avec xxxTeamspeak c'est possible !\nVenez donc sur http://www.xxx.com.
And the problem is only on one server.
What is strange is that i get this error in logs from the 1rst instance : 2010-08-07 13:22:45 LIST_ERROR SecuBot: ServerQuery Error 1024 getList(): invalid serverID
but the server is running fine and the bot on the server too...
any idea ?
@ TotoIsBack: Please contact me with any messenger you like to find this issue faster. If you don't have any messenger, please send me your config file (without password) by mail.
Is the bot instance with this problem the same as with the LIST ERROR message on logs?
I'll contact you via messenger ;)
Yes all the same instance (have only one instance with 8 or 9 bots)
After the good help of TotoIsBack I got a new version ready of the bot:
This version of the bot don't get a crisis if the virtual teamspeak server is offline anymore. It just try to reconnect after a minute. If this also fails, the bot quit or, if always reconnect in configuration is enabled, it tries to reconnect once every minute.Quote:
Version 3.3.2 Final (10.08.2010)
- Bugfix: Now the bot should also work if only Mute Mover, Server Group Protection, Bad Channelname or Bad Nickname Check is activated.
- Bugfix: Critical errors while requesting client or channel lists start the bot reconnecting countdown.
This should also solve the problem if only the virtual TS3 server will be stopped. (thx to TotoIsBack)
o Some messages on logfile should now give more and better informations.
o Changed the connecting order, now the bot login first after connection.
Some other minor bugs are fixed.
This bot version now login first after connecting to the TS3 server and select the right virtual server after the login. This means, if you want, you can now remove the "select virtual server" permission from the guest query group, but make sure that the group of the bot is able to do this.
Like always, please report me any problems with this version.
Download link in first post on page 1.
Nice release ;)
Working without problems ;)
I would like to request a feature.
Auto Icon/Group changer.
What I mean by this is, When people join the server it will set there Group based on country to have the Icon flag next to there name on the user list from where there located in the world.
Then If a game is located on the app scanner have it change there client ICON to the game icon of the game there playing. Then remove the icon if no game is playing.
You don't need to worry about the client icon thing. But auto group them by country would be nice.
Hi, you can enable the flag beside the name when you enable in the options under Design "Display country flag on the clients".Quote:
Originally Posted by nipper4369
The first suggestion is already implemented in the current TS3 client, just enable it in the options.Quote:
Originally Posted by nipper4369
The second is more like fun stuff, which don't get implemented (I would not say never, but not soon).