Nobody also me can not connect to local server

[DMlogan]

Hello everyone,

so heres my issue. i am trying to set up ts3 server on my imac(brandnew), stock firewall, linskys A600 router. I am able to run the actual server process and can connect to local host. sadly my isp block port 9987. so i did the server query from telnet and successfully changed the port to 10000(not blocked by isp) restart the server process and not i cant even connect to localhost. even still noone can log on from outside my network. i change the port back and it connects with no prolem. i use the command serveredit virtualserver_port=10000. Im at my wits end is the client still trying to connect to the default port? if so it would make sense that it cant connect cause theres nothing there. if thats the case is there a way to change what port the client is running to?please help. i have a mumble server running with no problem but its not nearly as cool as the ts software. HELPPP!!!!

[dante696]

This question sounds stupid, but have you added the right port in your bookmark/connect dialog?
The client does not connect to the default port, when a port was added into both.

LANIP:10000
192.0.0.10:10000

ExternalIP:10000
203.105.*.*:10000

[DMlogan]

Im very new to this, i dont believe i have done that nor do i know how. there is no INI file to be able to just edit stuff im stuck with the server query. what i can tell you is it has a dialog of listening on 0.0.0.0:10000. how do i change the ips?

[ANR Daemon]

He asked about client, not server.

[PotaBlava]

Im very new to this, i dont believe i have done that nor do i know how. there is no INI file to be able to just edit stuff im stuck with the server query. what i can tell you is it has a dialog of listening on 0.0.0.0:10000. how do i change the ips?

In the TS3 client that used to connect with localhost, try now with localhost:10000

[DMlogan]

ok that worked i dident know i could tell the client to connect to with another port. So now the issue that remains is now despite the port being fowarded CANYOUSEEME.ORG is saying the connection was refused. any tips on that?

[dante696]

Don't use it. Thats my tip.
Most services do not ask for UDP ports. Better ask a friend from outside to connect.

[DMlogan]

and your tip proved to be most helpful, to sum this up. i changed the port via localhost10011 using the commands

login serveradmin yourpassword (enter)
use SID=1 (Enter)
Serveredit virtualserver_port=10000 (enter)
Quit (Enter)
Remember after all commands you will get error message 0 OK

After that restarted my server and added port number you chose) after the address. Ignored what canyouseeme.org said(they were wrong the port is open) and had someone login from the outside. All runs well!!!! THANKS EVERYONE!!!! hopefully this summery helps the next person about to rip their hair out.

Admin please mark this as resolved.