Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 10 of 10
  1. #1
    Join Date
    October 2010
    Location
    Germany
    Posts
    67

    Source of "Channel empty since"

    Hey,

    if you select a channel in YaTQA there is a property named "empty since".

    Where does this property came from? Is there a column in the SQLLite DB like "channel_last_usage/connection" ?

    I ask because i would like to know how often a channel is used. I took a look in the logfiles but found nothing.


    Any informations about the property or how to look up usage infos of channels would be great!

    Greetings, FireEmerald

  2. #2
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,368
    Empty since is not stored in the database because it is only valid for temporary channels which are deleted on server shutdown.

  3. #3
    Join Date
    October 2010
    Location
    Germany
    Posts
    67
    But it's also possible to see this property on permanent channel. And it works also on these - until a server reboot.

    So, where does the property come from?

  4. #4
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,368
    Memory.

    blablasbadbsldbashdkvashfvdailsdfiasvüdfasä

  5. #5
    Join Date
    October 2010
    Location
    Germany
    Posts
    67
    What should your post tell me? -> It's possible. So there MUST be an answer of my question.
    Attached Images Attached Images  
    Last edited by FireEmerald; September 21st, 2014 at 09:53 PM.

  6. #6
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,368
    Server Query.

  7. #7
    Join Date
    June 2008
    Posts
    18,513
    He did answer your question.

    It's stored in the Memory and can only be requested via ServerQuery.

    It's not possible to get this from the databse. Anyways we do not offer support,for playing with the databse.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  8. #8
    Join Date
    October 2010
    Location
    Germany
    Posts
    67
    Partially - Server Query has a wide range of options - i didn't find these special point in the Server Query Manual.
    Could you give me a tip which Queryes are used to receive the information?

    Btw. i didn't changed (/don't want to change) anything on my Database.

  9. #9
    Join Date
    June 2008
    Posts
    18,513
    Type help in your ServerQuery or help channelinfo or channelinfo cid=x

    The Query tells you , that you can use help. Reading helps ;(
    Code:
    TS3
    Welcome to the TeamSpeak 3 ServerQuery interface, type "help" for a list of commands and "help <command>" for information on a specific command.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  10. #10
    Join Date
    October 2010
    Location
    Germany
    Posts
    67
    It's the channelinfo cid=XX command, last property seconds_empty.
    Code:
    Usage: channelinfo cid={channelID}
    
    pid=0
    channel_name=<•>\s\p\sChillen
    channel_topic
    channel_description
    channel_password=YOh84Uv6NosQcBM3z0n+0ouEnQ8=
    channel_codec=2
    channel_codec_quality=10
    channel_maxclients=-1
    channel_maxfamilyclients=-1
    channel_order=1787
    channel_flag_permanent=1
    channel_flag_semi_permanent=0
    channel_flag_default=0
    channel_flag_password=0
    channel_codec_latency_factor=1
    channel_codec_is_unencrypted=0
    channel_security_salt
    channel_delete_delay=0
    channel_flag_maxclients_unlimited=1
    channel_flag_maxfamilyclients_unlimited=0
    channel_flag_maxfamilyclients_inherited=1
    channel_filepath=files\/virtualserver_8\/channel_283
    channel_needed_talk_power=0
    channel_forced_silence=0
    channel_name_phonetic
    channel_icon_id=0
    channel_flag_private=0
    seconds_empty=27527
    So it's possible until a restart (Thread Tag)

    Greetings, FireEmerald
    Last edited by FireEmerald; October 5th, 2014 at 04:15 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 3
    Last Post: November 12th, 2012, 03:06 PM
  2. Can I use "whisper" to enable a "Public" and "Private" channel?
    By DadisAjax in forum General Questions
    Replies: 2
    Last Post: June 28th, 2012, 11:59 PM
  3. "database empty result set" on Permission System access
    By eurofighter1984 in forum Permission System
    Replies: 5
    Last Post: October 23rd, 2010, 02:40 PM
  4. Token problem: "database empty result set"
    By MatrimVidz in forum Permission System
    Replies: 1
    Last Post: January 3rd, 2010, 09:57 PM
  5. Replies: 4
    Last Post: December 24th, 2009, 11:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •