Forum

Results 1 to 5 of 5
  1. #1
    Join Date
    January 2015
    Location
    South Africa
    Posts
    11

    VPS Teamspeak server refuses display on Weblist

    Hi Guys

    Thank you for reading this

    I've been battling for a week to get my existing Server to show up on the web-list.

    I've recreated my Firewall rules (Iptables) Many times without any luck.

    When i stop my IPTables and wait a few minutes then my servers correctly appear on the weblist.
    I am aware that the time on my server is not correct, Will this make a difference as it works when my iptables is turned off.

    I will post my environment variables below.

    Linux teamspeak 2.6.32-042stab092.3 #1 SMP FRI JAN 30 13:27:24 MSK 2015 i686 i686 i386 GNU/Linux
    ([email protected]) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC)
    CentOS release 6.6 (Final)

    I've got 4 Virtual server
    Not one of them are showing on the Weblist.

    My weblist is enabled
    serveredit virtualserver_weblist_enable=1

    Here are my IPTables rule set

    [@teamspeak ~]# service iptables status
    Table: raw
    Chain PREROUTING (policy ACCEPT)
    num target prot opt source destination

    Chain OUTPUT (policy ACCEPT)
    num target prot opt source destination

    Table: mangle
    Chain PREROUTING (policy ACCEPT)
    num target prot opt source destination

    Chain INPUT (policy ACCEPT)
    num target prot opt source destination

    Chain FORWARD (policy ACCEPT)
    num target prot opt source destination

    Chain OUTPUT (policy ACCEPT)
    num target prot opt source destination

    Chain POSTROUTING (policy ACCEPT)
    num target prot opt source destination

    Table: filter
    Chain INPUT (policy DROP)
    num target prot opt source destination
    1 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53
    2 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53
    3 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:22
    4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22
    5 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:443
    6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443
    7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:10000
    8 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000
    9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:80
    10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
    11 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:10011
    12 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10011
    13 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:30033
    14 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:30033
    15 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:9998
    16 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:9998
    17 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:9999
    18 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:9999
    19 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:9988
    20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:9988
    21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:9987
    22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:9987
    23 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:2008
    24 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:2010

    Chain FORWARD (policy DROP)
    num target prot opt source destination

    Chain OUTPUT (policy ACCEPT)
    num target prot opt source destination
    1 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:2010


    At the moment of this post my OUTPUT was not there but this is the rule i normally have in my output chain

    iptables -t filter -A INPUT -p udp --dport 2010 -j ACCEPT

    I can telnet to the Weblist

    [@teamspeak /]# telnet weblist.teamspeak.com 2010
    Trying 194.97.114.3...
    Connected to weblist.teamspeak.com.
    Escape character is '^]'.


    I've been battling this for more than a week now. Do any of you have any other suggestions?

    Regards
    KGB Artapel
    Last edited by KGBArtapel; January 30th, 2015 at 10:56 AM.

  2. #2
    Join Date
    December 2009
    Location
    UK
    Posts
    768
    You've given us everything except the name of your server(s)

    It's very likely they are on the weblist, you just need to use filters to see them

  3. #3
    Join Date
    January 2015
    Location
    South Africa
    Posts
    11
    Quote Originally Posted by Air SeaTac View Post
    You've given us everything except the name of your server(s)

    It's very likely they are on the weblist, you just need to use filters to see them
    You know Murphy`s law is a #$%^ because my server is now showing up, and its because i recreated my iptables for like the 5th time this morning after i posted this thread.

    I was aware of the Filters and know them very well (by now) haha.

    But thank you for the reply i really appreciate it.

    Damn you Murphy

    Regards
    Corné Kruger

  4. #4
    Join Date
    June 2008
    Posts
    18,261
    Could it be, that you did not wait ~10 minutes before testing this?

    It takes up to 10 minutes, before your server shows up.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  5. #5
    Join Date
    January 2015
    Location
    South Africa
    Posts
    11
    Quote Originally Posted by dante696 View Post
    Could it be, that you did not wait ~10 minutes before testing this?

    It takes up to 10 minutes, before your server shows up.
    Yes for the Current recreate of the iptables this was the case but it does not explain what ive had to go trough during the week as i have a script that configures my iptables. i just run the script every time

    But thanx guys!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Server refuses all connections
    By DavidCopperhead in forum Server Support
    Replies: 7
    Last Post: March 18th, 2012, 11:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •