Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 15 of 15
  1. #1
    Join Date
    September 2012
    Posts
    6,079

    TeamSpeak Client 3.0.17 released

    Hello,

    the latest release for Client version 3.0.17 is available.

    This is a pretty big release for us with lots of internal changes:

    • The TeamSpeak client now sends some statistics about your operating system and hardware to us. This is an opt-in feature, you will be asked before anything is sent.
      The reason for this is, we really need some fundamental data to be able to make future decisions, for example whether we need support for certain operating systems. Right now we have no idea how many people are still running TeamSpeak on no longer supported systems like XP or OS X 10.6. The data is sent anonymously and cannot be traced back to you.
      The exact data is shown in the client log when it is sent, for those who are interested in the details. It includes information about the CPU supporting 32 or 64 bit, supported hardware features of the CPU (e.g. SSE2), operating system, version number and 32/64 bit type of operating system and the version of the current TeamSpeak client. We do not scan for installed software. This report would be sent once per month, unless you cancel your opt-in again. We would be very happy if many users decide to opt-in, as this data will be helpful for us.
      We do value privacy a lot, and we are of the opinion this is one of the big selling points of TeamSpeak, but we think the collected data is rather harmless regarding privacy concerns.
    • For legal reasons you now need to accept a TeamSpeak client license agreement the first time you start the client, and again in case of a change to the license agreement. You should know this from other software and games, so hopefully this is not a big deal.
    • We added a new crashdump upload system. Previously dumps had to be manually uploaded to the forum, which was not optimal for both our users and us. Users had to create a forum account if they didn't have one, and it involved some work. I suppose many people just stopped at the forum account creation, so we probably missed a lot of those crashes. On the other hand it was also bad for us, because we had to examine all these crashes, and see a lot of the same multiple times. With the new system multiple uploads of the same crash will be categorized properly, so we don't need to examine the same crash over and over. The time we save here can be invested into more interesting things.
      We hope this new system lets us react to problems faster, and not only when the forum has exploded, like with the currently reported crash with certain pre-installed OEM software (which should hopefully be fixed with 3.0.17). Also we hope that more people will send us their crash reports because it is now much less effort.
      This system is also opt-in, nothing is sent unless you explicitly click the Send button in the error reporter.
    • We overhauled the newsticker, it's now multilingual and can be updated faster. The beta news are separate from the news shown in 3.0.16. We will be experimenting with this during the beta, so please don't wonder if you see some testing news during the next week. :-)
      This is not meant as a Twitter replacement, but occasionally we want to share something with every user.
    • Finally, and this has been the biggest change for us (but invisible to you), we completely overhauled our build system. We also upgraded our compilers and our entire backend to have a future-proof foundation for the next years, especially as we are already using C++11 language features in our new code. I understand that's boring to most of you, but for us it has been a vast quality of life improvement. This upgrade is the reason why there has not been a release for quite some time. We hope to get back to a more regular update frequency again now that we are set.


    The upcoming sync feature is not included in the 3.0.17 release. We are not fully satisfied with the current solution and don't want to release something to the public we are not completely happy with ourselves. While we understand it is not optimal to have it promised for quite some time now, it is against our philosophy to release something which does not completely meet your and our demands.

    This release requires at least OS X 10.7 for Mac, support for earlier versions has been dropped.

    If you are not yet on the beta channel, you can easily select it by going to Options / Applications and switch the Update Channel dropdown box to "Beta". To opt-out of Beta again, switch it back to "Stable".

    Please find the entire changelog below:
    Code:
    === Client Release 3.0.17 22 Jul 2015
    * Updated to Qt 5.4.1 
    + Added automatic crashdump upload, replacing the old manual upload to the
      forum. In case of a crash, a report tool will show and ask the user if the
      dump should be automatically uploaded to our servers.
    + Collect and send anonymous statistics about users hardware and operating
      system to us for internal decisions (which hardware and OS version needs to
      be supported etc.). Disabled by default, user will be asked by a dialog the
      first time, to agree to send the data. Decision can be changed later in
      Options/Application/Anonymous Statistics. What exactly is being sent is
      displayed in the client log. If agreed, data is sent once per month. Users on
      beta channel always send the data.
    + Added multilingual license agreement dialog due to legal requirements.
    + Added multilingual newsticker with support for dynamic update periods.
    + Multilingual Windows installer.
    + Iconpacks default_colored_2014 and default_mono_2014 updated. Some icons
      were overhauled and some new were added.
    + OS X: Added support for GateKeeper Version 2 signatures for OS X 10.9 and
      above.
    + Added more icon names to settings.ini.
    + Improved support for high resolution Retina displays.
    + Added dialog to restart client after changing iconpack or language.
    + Added taskbar flashing on incoming chat message.
    + Updated Windows C++ runtime to version 120.
    - Fixed URL capture when emoticon replacement is enabled. The emoticon :/ was
      replaced inside hyperlinks (http://) and thus ruined the link. Also fixed
      clientid:// and channelid:// links, which were affected by the same problem.
    - Fixed scaling of various images.
    - Fixed possible crashes related to filetransfer.
    - Changed appearance of poke dialog when client is minimized, hidden or behind
      a fullscreen application.
    - Fixed crash with rotating users in 3D sound.
    - Fixed possible crash with some Bluetooth controllers.
    - Fixed searching server tree for custom name and nickname.
    - Fixed sending offline messages to multiple users.
    - Fixed issue with chat partner disconnecting.
    - Fixed special character treatment in TSDNS resolver.
    - Fixed various issues with URL tagging.
    - Reworked UTF-8 conversion backend.
    - Fixed possible crash with invalid texts in virtual server settings dialog.
    - Removed appscanner plugin due to questionable usefulness
    Last edited by Chris; August 12th, 2015 at 10:23 AM.

  2. #2
    Join Date
    January 2014
    Posts
    86
    Hello,

    why removed language pack? ;/

    Regards
    Last edited by dziudziu; August 10th, 2015 at 09:39 AM.

  3. #3
    Join Date
    June 2008
    Posts
    18,513
    They have been temporary removed due the amount of complaints from the community during the beta test.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  4. #4
    Join Date
    January 2014
    Posts
    86
    What were the mistakes?
    How long will it take repair?
    Last edited by dziudziu; August 10th, 2015 at 09:51 AM.

  5. #5
    Join Date
    August 2015
    Posts
    1

    Server port

    Ok, So maybe I am blind or dumb but I do not see where to enter the server port on the new update. BTW it looks great!!!

  6. #6
    Join Date
    October 2012
    Location
    Germany
    Posts
    553
    Note that the client updater of my stable channel install crossgraded me from win64 to win32.
    This update was done post Win10 install.

    My beta channel install hasn't shown this behaviour.
    I don't recall if I updated the betas on their release date.

    --------------

    While walking by that point, note that the uninstaller leaves the updated msvc libs behind.



    No biggies, just saying.
    Spent some time wondering why my win64 test compiles for the next plugin update weren't showing any updated behaviour

  7. #7
    Join Date
    October 2011
    Posts
    18
    I have a problem where, when I resume my PC from standby, the volume slider in the client is in a position that does not represent the loudness level. As in, TS is super low volume but the slider is actually in the middle of the bar. As soon as I click the slider once, the volume level jumps back up to the supposed loudness even if I only move it 0.1mm. This started with the .17 beta series

  8. #8
    Join Date
    October 2003
    Location
    Germany
    Posts
    2,527
    Version 3.0.17 also comes with updated Opus codecs... just in case someone was about to ask the usual "what about Opus 1.1" question.


  9. #9
    Join Date
    May 2012
    Location
    The 3rd dimension
    Posts
    956
    What is updated about the opus codecs?

  10. #10
    Join Date
    October 2003
    Location
    Germany
    Posts
    2,527
    Quote Originally Posted by Morthawt View Post
    What is updated about the opus codecs?
    Nothing an end-user would notice I guess. Please refer to the Opus changelog if you're interested in the details.

  11. #11
    Join Date
    November 2011
    Location
    Belarus
    Posts
    142
    Quote Originally Posted by ScP View Post
    Nothing an end-user would notice I guess. Please refer to the Opus changelog if you're interested in the details.
    Nothing?
    After more than two years of development, we have released Opus 1.1. This includes:

    new analysis code and tuning that significantly improves encoding quality, especially for variable-bitrate (VBR),
    automatic detection of speech or music to decide which encoding mode to use,
    surround with good quality at 128 kbps for 5.1 and usable down to 48 kbps, and
    speed improvements on all architectures, especially ARM, where decoding uses around 40% less CPU and encoding uses around 30% less CPU.
    TeamSpeak can finally stop burning my phone, so im gonna wait for this update

  12. #12
    Join Date
    August 2015
    Posts
    1

    keybinds broken in this build

    Im using CAPS LOCK as push to talk key i have it remapped from Scroll Lock to disable accidentaly using capitals while typing since i only use it for push to talk. With this latest build Teamspeak fails to recognice the mapped key, going back to older versions fixes it. but what i wonder is if this is intended to drop remap keybinds?

  13. #13
    Join Date
    January 2010
    Location
    El Prat de Llobregat (Barcelona, Spain)
    Posts
    2,698

    Client log file is hard to be read with windows notepad

    Client log file is shown in one line by the windows notepad so it's hard to be read.

    Code:
     Now
    2015-08-26 18:25:23.595555|INFO    |              |   |TeamSpeak 3 Client 3.0.17 (2015-08-04 07:38:33) 2015-08-26 18:25:23.596555|INFO    |              |   |SystemInformation: Windows 7 SP1 (7601) x86 Binary: 32bit 2015-08-26 18:25:23.596555|INFO    |              |   |Using hardware aes 2015-08-26 18:25:23.611556|DEBUG   |Direct Sound  |   |setting timer resolution to 1ms 2015-08-26 18:25:23.653559|INFO    |              |   |Loading plugin: clientquery_plugin
    Code:
     Before
    2015-08-26 20:27:19.385178|INFO    |              |   | TeamSpeak 3 Client 3.0.16 (2014-08-04 13:42:43)
    2015-08-26 20:27:19.385178|INFO    |              |   | SystemInformation: Windows 7 SP1 (7601) x86 Binary: 32bit
    2015-08-26 20:27:19.385178|INFO    |              |   | Using hardware aes
    2015-08-26 20:27:19.398179|DEBUG   |Direct Sound  |   | setting timer resolution to 1ms
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: appscanner_plugin
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: clientquery_plugin
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: lua_plugin
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: now_playing_win32
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: teamspeak_control_plugin
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: test_plugin
    2015-08-26 20:27:19.437181|INFO    |              |   | Loading plugin: ts3g15

  14. #14
    Join Date
    August 2015
    Posts
    1
    Hello friend,

    i download TS3 Client but i see client have Trojen ? İt is true ?

    Name:  Ads?z.jpg
Views: 1822
Size:  88.1 KB

  15. #15
    Join Date
    June 2008
    Location
    Krün, Germany
    Posts
    510
    Hello levarithin,

    I contacted Zillya reporting a false positive on the TeamSpeak 64 bit Windows installer. Just got a reply they are investigating the issue.

    Thanks for the hint.

    Update: Zillya confirmed it was a false positive detection and informed me they applied a fix to their anti-virus scanner.
    Last edited by PeterS; September 4th, 2015 at 02:19 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. TeamSpeak 3 Client 3.0.15.1 released
    By Chris in forum Archive
    Replies: 17
    Last Post: July 19th, 2014, 01:42 PM
  2. TeamSpeak 3 Client 3.0.13 released
    By Chris in forum Archive
    Replies: 9
    Last Post: October 23rd, 2013, 12:21 AM
  3. TeamSpeak 3 Client 3.0.12 released
    By dante696 in forum Archive
    Replies: 7
    Last Post: September 20th, 2013, 02:58 PM
  4. TeamSpeak 3 Client 3.0.11.1 released
    By Chris in forum Archive
    Replies: 3
    Last Post: August 12th, 2013, 07:12 AM
  5. TeamSpeak Client 3.0.10.1 released
    By Chris in forum Archive
    Replies: 2
    Last Post: April 11th, 2013, 09:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •