Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 7 of 7
  1. #1
    Join Date
    November 2010
    Location
    Romania
    Posts
    7

    Question Server Setup Problems

    I'm setting up a new installation of Teamspeak 3 (3.0.12) on a new server (Ubuntu 15.10). The server is setup and ServerQuery confirms it is running on port 9987

    virtualserver_id=1 virtualserver_port=9987 virtualserver_status=online virtualserver_clientsonline=0 virtualserver_queryclientsonline=0 virtualserver_maxclients=32 virtualserver_uptime=698598 virtualserver_name=TeamSpeak\s]I[\sServer virtualserver_autostart=1 virtualserver_machine_id
    I *believe* I have opened all of the ports necessary.

    sudo iptables -L shows....
    ACCEPT udp -- anywhere anywhere udp dpt:9987
    ACCEPT tcp -- anywhere anywhere tcp dpt:30033
    ACCEPT tcp -- anywhere anywhere tcp dpt:10011
    ACCEPT tcp -- anywhere anywhere tcp dpt:41144
    ACCEPT udp -- anywhere anywhere udp dpt:9987
    ACCEPT udp -- anywhere anywhere udp dpt:9987
    ACCEPT udp -- anywhere anywhere udp spt:9987
    ACCEPT tcp -- anywhere anywhere tcp dpt:30033
    ACCEPT tcp -- anywhere anywhere tcp spt:30033
    ACCEPT tcp -- anywhere anywhere tcp dpt:10011
    ACCEPT tcp -- anywhere anywhere tcp spt:10011

    I can connect to ServerQuery from localhost but not from a remote host. I cannot connect using a Teamspeak client.

    Am I missing anything obvious? What else should I check?

    Thanks in advance for the help

  2. #2
    Join Date
    December 2004
    Location
    RF
    Posts
    3,008
    Likely, you don't have/not using right external address.

    P.S.
    If you don't know, what you are doing, do not use intermediate OS versions.
    Stick to LTS releases.

  3. #3
    Join Date
    November 2010
    Location
    Romania
    Posts
    7
    Quote Originally Posted by ANR Daemon View Post
    Likely, you don't have/not using right external address.
    I'm connecting to the same ip that i ssh to, so I'm pretty sure I'm connecting to the correct address, or TS needs to be told what external ip address to listen on? I thought it just listened on all addresses?

  4. #4
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,367
    In general, TeamSpeak can't handle multiple IPs very well. You better bind it to an IP. Also, it must be IPv4.

  5. #5
    Join Date
    November 2010
    Location
    Romania
    Posts
    7
    Quote Originally Posted by numma_cway View Post
    You better bind it to an IP.
    Can't find anything in the docs that explains how to bind TS3 to an ip. Is this achieved with server query?

  6. #6
    Join Date
    November 2010
    Location
    Romania
    Posts
    7
    A tcpdump shows a connection being made when i attempt to connect with a remote client on UDP port 9987 which serverquery shows is the port that teamspeak is listening on

  7. #7
    Join Date
    December 2004
    Location
    RF
    Posts
    3,008
    1. Handling of multiple IP addresses is NOT A QUESTION OF TeamSpeak functionality. Stop spreading misinformation.
    2. Using the same tcpdump, you can see, if TS is reacting to it at all, and where these packets are heading.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Resolved] Setup Problems
    By tictac22 in forum Linux / FreeBSD
    Replies: 4
    Last Post: January 25th, 2012, 11:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •