Forum


Notice to all users

We are migrating towards a new forum system located at community.teamspeak.com, as such this forum will become read-only on January 29, 2020

Results 1 to 15 of 97

Hybrid View

  1. #1
    Join Date
    September 2012
    Posts
    6,079

    [Discussion] TeamSpeak 3 Server 3.0.13

    This thread is for discussion and Feedback about the Server 3.0.13 release.
    For the announcement, including the changelog, please click here.
    When sending PMs please make sure to include a reference link to the thread in question in the body of your message.

  2. #2
    Join Date
    December 2009
    Location
    Luxembourg
    Posts
    21

    Question

    Hello,

    Since TeamSpeak 3 Server update 3.0.13 i have now:

    1. ts3server.sqlitedb
    2. ts3server.sqlitedb-wal (Write-ahead Log)
    3. ts3server.sqlitedb-shm (Shared-Memory Files)


    So can i safely remove *-wal & *-shm or are the temp files needed by Teamspeak 3?

    Regards,

    SeTech.
    Last edited by setech; August 4th, 2016 at 09:59 PM.

  3. #3
    Join Date
    September 2012
    Posts
    6,079
    These files are the result of the database now using WAL mode.
    As long as the server is running these files will be present and used by the server for database purposes. They'll usually be deleted when the server is shutdown gracefully. They'll likely remain on disk in case the server crashed, but should be cleaned up when the server starts again. See also http://sqlite.org/tempfiles.html
    When sending PMs please make sure to include a reference link to the thread in question in the body of your message.

  4. #4
    Join Date
    August 2016
    Posts
    3

    ipv6 required?

    Is ipv6 supported or required now? I just updated and my box failed to start because It does not have ipv6 enabled. Is there a way to disable this via args? A check should be added for this cases imo.

    This release also does not start on FreeBSD 11. Currently only works on 10.

  5. #5
    Join Date
    December 2009
    Location
    Poland
    Posts
    83
    - fixed assertion in puzzle feature
    Can you explain me this point? I do not understand it.

  6. #6
    Join Date
    June 2008
    Posts
    18,513
    Quote Originally Posted by Ultima View Post
    Is ipv6 supported or required now? I just updated and my box failed to start because It does not have ipv6 enabled. Is there a way to disable this via args? A check should be added for this cases imo.

    This release also does not start on FreeBSD 11. Currently only works on 10.
    IPv6 can be used as an optional feature and shouldn't be a must have.
    We only got warnings in the server logs, but the server did start. What is the server log saying?

    Note: FreeBSD 11 is currently not released as a stable version.
    I will download and test FreeBSD 11 amd64 (latest beta)

    ////Edit

    I did a retest with FreeBSD 11 Beta3 and had no problems starting server 3.0.13
    Ipv6 was not Setup and only local IPv6 was provided on that machine

    Started with command: ./ts3server_startscript.sh start
    Code:
    2016-08-05 14:37:23.466293|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-05 14:37:23.466389|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 11.0-BETA3 FreeBSD 11.0-BETA3 #0 r303469: Fri Jul 29 02:27:28 UTC 2016     [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 Binary: 64bit
    2016-08-05 14:37:23.466427|WARNING |ServerLibPriv |   |The system locale is set to "C" this can cause unexpected behavior. We advice you to repair your locale!
    2016-08-05 14:37:23.466668|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-05 14:37:23.466701|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-05 14:37:23.466844|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-05 14:37:23.474178|INFO    |SQL           |   |db_CreateTables() tables created
    2016-08-05 14:37:23.497463|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-05 14:37:24.099271|INFO    |              |   |Puzzle precompute time: 567
    2016-08-05 14:37:24.100006|INFO    |FileManager   |   |listening on 0.0.0.0:30033, :::30033
    2016-08-05 14:37:24.100764|INFO    |VirtualSvrMgr |   |executing monthly interval
    2016-08-05 14:37:24.100873|INFO    |VirtualSvrMgr |   |reset virtualserver traffic statistics
    2016-08-05 14:37:24.152229|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, ::1/128, 
    2016-08-05 14:37:24.152556|INFO    |Query         |   |listening on 0.0.0.0:10011, :::10011
    
    
    2016-08-05 14:37:24.151535|INFO    |VirtualServer |1  |listening on 0.0.0.0:9987, :::9987
    2016-08-05 14:37:24.151969|WARNING |VirtualServer |1  |--------------------------------------------------------
    2016-08-05 14:37:24.152006|WARNING |VirtualServer |1  |ServerAdmin privilege key created, please use the line below
    2016-08-05 14:37:24.152039|WARNING |VirtualServer |1  |token=iUmDVjULNInoEWJ6y5DHD5GizqwhNkLqP7xSuE0F
    2016-08-05 14:37:24.152067|WARNING |VirtualServer |1  |--------------------------------------------------------

    Quote Originally Posted by Dream View Post
    Can you explain me this point? I do not understand it.
    It was a rare crash on server instance start, nothing important because it was really rare and you could start the server again without problems.
    Last edited by dante696; August 5th, 2016 at 04:42 PM.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  7. #7
    Join Date
    August 2016
    Posts
    3
    Quote Originally Posted by dante696 View Post
    IPv6 can be used as an optional feature and shouldn't be a must have.
    We only got warnings in the server logs, but the server did start. What is the server log saying?

    Note: FreeBSD 11 is currently not released as a stable version.
    I will download and test FreeBSD 11 amd64 (latest beta)

    ////Edit

    I did a retest with FreeBSD 11 Beta3 and had no problems starting server 3.0.13
    Ipv6 was not Setup and only local IPv6 was provided on that machine

    Started with command: ./ts3server_startscript.sh start
    Code:
    2016-08-05 14:37:23.466293|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-05 14:37:23.466389|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 11.0-BETA3 FreeBSD 11.0-BETA3 #0 r303469: Fri Jul 29 02:27:28 UTC 2016     [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 Binary: 64bit
    2016-08-05 14:37:23.466427|WARNING |ServerLibPriv |   |The system locale is set to "C" this can cause unexpected behavior. We advice you to repair your locale!
    2016-08-05 14:37:23.466668|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-05 14:37:23.466701|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-05 14:37:23.466844|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-05 14:37:23.474178|INFO    |SQL           |   |db_CreateTables() tables created
    2016-08-05 14:37:23.497463|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-05 14:37:24.099271|INFO    |              |   |Puzzle precompute time: 567
    2016-08-05 14:37:24.100006|INFO    |FileManager   |   |listening on 0.0.0.0:30033, :::30033
    2016-08-05 14:37:24.100764|INFO    |VirtualSvrMgr |   |executing monthly interval
    2016-08-05 14:37:24.100873|INFO    |VirtualSvrMgr |   |reset virtualserver traffic statistics
    2016-08-05 14:37:24.152229|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, ::1/128, 
    2016-08-05 14:37:24.152556|INFO    |Query         |   |listening on 0.0.0.0:10011, :::10011
    
    
    2016-08-05 14:37:24.151535|INFO    |VirtualServer |1  |listening on 0.0.0.0:9987, :::9987
    2016-08-05 14:37:24.151969|WARNING |VirtualServer |1  |--------------------------------------------------------
    2016-08-05 14:37:24.152006|WARNING |VirtualServer |1  |ServerAdmin privilege key created, please use the line below
    2016-08-05 14:37:24.152039|WARNING |VirtualServer |1  |token=iUmDVjULNInoEWJ6y5DHD5GizqwhNkLqP7xSuE0F
    2016-08-05 14:37:24.152067|WARNING |VirtualServer |1  |--------------------------------------------------------
    I have ipv6 explicitly disabled, The server expects ipv6 support regardless and fails to boot.
    Code:
    2016-08-06 03:43:20.380204|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-06 03:43:20.380950|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 12.0-CURRENT FreeBSD 12.0-CURRENT #20 r303746: Thu Aug  4 12:33:16 EDT 2016     [email protected]:/usr/src/head/obj/usr/src/head/src/sys/MYKERNEL-NODEBUG amd64 Binary: 64bit
    2016-08-06 03:43:20.382119|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-06 03:43:20.382183|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-06 03:43:20.382631|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-06 03:43:20.400783|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-06 03:43:22.029682|INFO    |              |   |Puzzle precompute time: 1050
    2016-08-06 03:43:22.030462|ERROR   |FileManager   |   |bind failed on :::30033; reason: Protocol not supported
    2016-08-06 03:43:22.030532|ERROR   |FileManager   |   |filetransfer bind failed on :::30033; reason: Protocol not supported
    2016-08-06 03:43:22.030598|CRITICAL|VirtualSvrMgr |   |Could not start file manager 258 no network port available
    And my apologies about FreeBSD 11, my issue seems to be unrelated to the versioning. By any chance, is there a link to a lists of all the command line args for ts3server? I found a link that shows them, however it did not come from the teamspeak domain so I'm fairly certain the accuracy would be off especially with a new release.

  8. #8
    Join Date
    August 2016
    Posts
    1

    I want to solve the problem stop server

    Hello I have a problem which is every 3 hours are stop server For a few seconds Is the problem in the ddos attack ? !

    Please fix the problem as soon as possible because this problem since the days
    Last edited by dante696; August 15th, 2016 at 10:56 AM. Reason: merged

  9. #9
    Join Date
    January 2014
    Posts
    86

    New version 3.0.13.7

    Hello,

    "Fixed server query clients now honor name bans".
    For example? What is this?

    Best regard,
    Greg
    Last edited by dante696; July 11th, 2017 at 08:41 AM. Reason: merged

  10. #10
    Join Date
    June 2008
    Posts
    18,513
    Querys without permission b_client_ignore_bans can't set banned names.
    Code:
    clientupdate client_nickname=test
    error id=3330 msg=rename\sfailed,\snew\sname\sis\sbanned
    login serveradmin password
    error id=0 msg=ok
    clientupdate client_nickname=test
    error id=0 msg=ok
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  11. #11
    Join Date
    June 2015
    Posts
    41
    Hello is 3.0.13.7 binary identical to the pre-release? So no update needed for beta users?

    Cheers

  12. #12
    Join Date
    June 2008
    Posts
    18,513
    Yes it is the same version. The beta became the stable version without any other changes.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  13. #13
    Join Date
    September 2017
    Location
    holland
    Posts
    9

    teamspeak server/client nickname

    goodday everyone,

    I was so read here and saw the new added voucher of server nickname (great move in the forefront of team talk!)

    Now the question is correct to me, can this be reversed too? so that the client can hide its IP to the teamspeak server

    This will give the client the last piece of private

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Discussion] TeamSpeak 3 Server 3.0.12.*
    By Dream in forum Suggestions and Feedback
    Replies: 7
    Last Post: April 5th, 2016, 11:18 PM
  2. Replies: 20
    Last Post: June 21st, 2012, 11:56 AM
  3. Replies: 9
    Last Post: April 23rd, 2012, 08:12 AM
  4. Replies: 31
    Last Post: March 19th, 2012, 03:07 PM
  5. Replies: 31
    Last Post: February 17th, 2012, 05:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •