Forum

Page 1 of 7 123 ... LastLast
Results 1 to 15 of 97
  1. #1
    Join Date
    September 2012
    Posts
    6,061

    [Discussion] TeamSpeak 3 Server 3.0.13

    This thread is for discussion and Feedback about the Server 3.0.13 release.
    For the announcement, including the changelog, please click here.
    When sending PMs please make sure to include a reference link to the thread in question in the body of your message.

  2. #2
    Join Date
    December 2009
    Location
    Luxembourg
    Posts
    10

    Question

    Hello,

    Since TeamSpeak 3 Server update 3.0.13 i have now:

    1. ts3server.sqlitedb
    2. ts3server.sqlitedb-wal (Write-ahead Log)
    3. ts3server.sqlitedb-shm (Shared-Memory Files)


    So can i safely remove *-wal & *-shm or are the temp files needed by Teamspeak 3?

    Regards,

    SeTech.
    Last edited by setech; August 4th, 2016 at 08:59 PM.

  3. #3
    Join Date
    September 2012
    Posts
    6,061
    These files are the result of the database now using WAL mode.
    As long as the server is running these files will be present and used by the server for database purposes. They'll usually be deleted when the server is shutdown gracefully. They'll likely remain on disk in case the server crashed, but should be cleaned up when the server starts again. See also http://sqlite.org/tempfiles.html
    When sending PMs please make sure to include a reference link to the thread in question in the body of your message.

  4. #4
    Join Date
    August 2016
    Posts
    3

    ipv6 required?

    Is ipv6 supported or required now? I just updated and my box failed to start because It does not have ipv6 enabled. Is there a way to disable this via args? A check should be added for this cases imo.

    This release also does not start on FreeBSD 11. Currently only works on 10.

  5. #5
    Join Date
    December 2009
    Location
    Poland
    Posts
    83
    - fixed assertion in puzzle feature
    Can you explain me this point? I do not understand it.

  6. #6
    Join Date
    June 2008
    Posts
    17,724
    Quote Originally Posted by Ultima View Post
    Is ipv6 supported or required now? I just updated and my box failed to start because It does not have ipv6 enabled. Is there a way to disable this via args? A check should be added for this cases imo.

    This release also does not start on FreeBSD 11. Currently only works on 10.
    IPv6 can be used as an optional feature and shouldn't be a must have.
    We only got warnings in the server logs, but the server did start. What is the server log saying?

    Note: FreeBSD 11 is currently not released as a stable version.
    I will download and test FreeBSD 11 amd64 (latest beta)

    ////Edit

    I did a retest with FreeBSD 11 Beta3 and had no problems starting server 3.0.13
    Ipv6 was not Setup and only local IPv6 was provided on that machine

    Started with command: ./ts3server_startscript.sh start
    Code:
    2016-08-05 14:37:23.466293|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-05 14:37:23.466389|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 11.0-BETA3 FreeBSD 11.0-BETA3 #0 r303469: Fri Jul 29 02:27:28 UTC 2016     [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 Binary: 64bit
    2016-08-05 14:37:23.466427|WARNING |ServerLibPriv |   |The system locale is set to "C" this can cause unexpected behavior. We advice you to repair your locale!
    2016-08-05 14:37:23.466668|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-05 14:37:23.466701|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-05 14:37:23.466844|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-05 14:37:23.474178|INFO    |SQL           |   |db_CreateTables() tables created
    2016-08-05 14:37:23.497463|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-05 14:37:24.099271|INFO    |              |   |Puzzle precompute time: 567
    2016-08-05 14:37:24.100006|INFO    |FileManager   |   |listening on 0.0.0.0:30033, :::30033
    2016-08-05 14:37:24.100764|INFO    |VirtualSvrMgr |   |executing monthly interval
    2016-08-05 14:37:24.100873|INFO    |VirtualSvrMgr |   |reset virtualserver traffic statistics
    2016-08-05 14:37:24.152229|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, ::1/128, 
    2016-08-05 14:37:24.152556|INFO    |Query         |   |listening on 0.0.0.0:10011, :::10011
    
    
    2016-08-05 14:37:24.151535|INFO    |VirtualServer |1  |listening on 0.0.0.0:9987, :::9987
    2016-08-05 14:37:24.151969|WARNING |VirtualServer |1  |--------------------------------------------------------
    2016-08-05 14:37:24.152006|WARNING |VirtualServer |1  |ServerAdmin privilege key created, please use the line below
    2016-08-05 14:37:24.152039|WARNING |VirtualServer |1  |token=iUmDVjULNInoEWJ6y5DHD5GizqwhNkLqP7xSuE0F
    2016-08-05 14:37:24.152067|WARNING |VirtualServer |1  |--------------------------------------------------------

    Quote Originally Posted by Dream View Post
    Can you explain me this point? I do not understand it.
    It was a rare crash on server instance start, nothing important because it was really rare and you could start the server again without problems.
    Last edited by dante696; August 5th, 2016 at 03:42 PM.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  7. #7
    Join Date
    August 2016
    Posts
    3
    Quote Originally Posted by dante696 View Post
    IPv6 can be used as an optional feature and shouldn't be a must have.
    We only got warnings in the server logs, but the server did start. What is the server log saying?

    Note: FreeBSD 11 is currently not released as a stable version.
    I will download and test FreeBSD 11 amd64 (latest beta)

    ////Edit

    I did a retest with FreeBSD 11 Beta3 and had no problems starting server 3.0.13
    Ipv6 was not Setup and only local IPv6 was provided on that machine

    Started with command: ./ts3server_startscript.sh start
    Code:
    2016-08-05 14:37:23.466293|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-05 14:37:23.466389|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 11.0-BETA3 FreeBSD 11.0-BETA3 #0 r303469: Fri Jul 29 02:27:28 UTC 2016     [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 Binary: 64bit
    2016-08-05 14:37:23.466427|WARNING |ServerLibPriv |   |The system locale is set to "C" this can cause unexpected behavior. We advice you to repair your locale!
    2016-08-05 14:37:23.466668|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-05 14:37:23.466701|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-05 14:37:23.466844|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-05 14:37:23.474178|INFO    |SQL           |   |db_CreateTables() tables created
    2016-08-05 14:37:23.497463|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-05 14:37:24.099271|INFO    |              |   |Puzzle precompute time: 567
    2016-08-05 14:37:24.100006|INFO    |FileManager   |   |listening on 0.0.0.0:30033, :::30033
    2016-08-05 14:37:24.100764|INFO    |VirtualSvrMgr |   |executing monthly interval
    2016-08-05 14:37:24.100873|INFO    |VirtualSvrMgr |   |reset virtualserver traffic statistics
    2016-08-05 14:37:24.152229|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, ::1/128, 
    2016-08-05 14:37:24.152556|INFO    |Query         |   |listening on 0.0.0.0:10011, :::10011
    
    
    2016-08-05 14:37:24.151535|INFO    |VirtualServer |1  |listening on 0.0.0.0:9987, :::9987
    2016-08-05 14:37:24.151969|WARNING |VirtualServer |1  |--------------------------------------------------------
    2016-08-05 14:37:24.152006|WARNING |VirtualServer |1  |ServerAdmin privilege key created, please use the line below
    2016-08-05 14:37:24.152039|WARNING |VirtualServer |1  |token=iUmDVjULNInoEWJ6y5DHD5GizqwhNkLqP7xSuE0F
    2016-08-05 14:37:24.152067|WARNING |VirtualServer |1  |--------------------------------------------------------
    I have ipv6 explicitly disabled, The server expects ipv6 support regardless and fails to boot.
    Code:
    2016-08-06 03:43:20.380204|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-06 03:43:20.380950|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 12.0-CURRENT FreeBSD 12.0-CURRENT #20 r303746: Thu Aug  4 12:33:16 EDT 2016     [email protected]:/usr/src/head/obj/usr/src/head/src/sys/MYKERNEL-NODEBUG amd64 Binary: 64bit
    2016-08-06 03:43:20.382119|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-06 03:43:20.382183|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-06 03:43:20.382631|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-06 03:43:20.400783|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-06 03:43:22.029682|INFO    |              |   |Puzzle precompute time: 1050
    2016-08-06 03:43:22.030462|ERROR   |FileManager   |   |bind failed on :::30033; reason: Protocol not supported
    2016-08-06 03:43:22.030532|ERROR   |FileManager   |   |filetransfer bind failed on :::30033; reason: Protocol not supported
    2016-08-06 03:43:22.030598|CRITICAL|VirtualSvrMgr |   |Could not start file manager 258 no network port available
    And my apologies about FreeBSD 11, my issue seems to be unrelated to the versioning. By any chance, is there a link to a lists of all the command line args for ts3server? I found a link that shows them, however it did not come from the teamspeak domain so I'm fairly certain the accuracy would be off especially with a new release.

  8. #8
    Join Date
    December 2009
    Location
    Luxembourg
    Posts
    10
    Full changelog below:
    Code:
    === Server Release 3.0.13  1 august 2016
     .....
      - binding voice to the any address (0.0.0.0 / 0::0), which is the default behaviour of the server,
        now supports clients connecting to all addresses instead of just the default ip of the network interface.
     .....
    Code:
    2016-08-04 12:50:00.041452|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-04 12:50:00.043013|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #31337 r302002: Sat Jun 18 06:35:37 CEST 2016     [email protected]:/usr/obj/usr/src/sys/NORSE  amd64 Binary: 64bit
    2016-08-04 12:50:00.043762|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-04 12:50:00.043884|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-04 12:50:00.044328|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-04 12:50:00.059739|INFO    |SQL           |   |database updated successfully to revision: 25
    2016-08-04 12:50:00.261999|INFO    |Accounting    |   |Licensing Information
    2016-08-04 12:50:00.262106|INFO    |Accounting    |   |type              : Non-profit
    2016-08-04 12:50:00.262524|INFO    |Accounting    |   |starting date     : Wed Jun  1 00:00:00 2016
    2016-08-04 12:50:00.262595|INFO    |Accounting    |   |ending date       : Mon Dec  5 00:00:00 2016
    2016-08-04 12:50:00.262648|INFO    |Accounting    |   |max virtualservers: 10
    2016-08-04 12:50:00.262694|INFO    |Accounting    |   |max slots         : 512
    2016-08-04 12:50:00.294260|INFO    |DatabaseQuery |   |database busy, waiting for finishing index tasks, may take some time!
    2016-08-04 12:50:41.302446|INFO    |              |   |Puzzle precompute time: 605
    2016-08-04 12:50:41.348107|INFO    |FileManager   |   |listening on xx.xxx.xxx.xx:30033
    2016-08-04 12:50:41.409735|INFO    |CIDRManager   |   |updated query_ip_blacklist ips: xx.xx.xx.xx/32, 
    2016-08-04 12:50:41.409792|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, xx.xxx.xxx.xx/32, xx.xx.xxx.xxx/32, xx.xx.xxx.0/19, 
    2016-08-04 12:50:41.409908|INFO    |Query         |   |listening on xx.xxx.xxx.xx:10011
    2016-08-04 12:54:46.944866|INFO    |ServerMain    |   |Received signal SIGTERM, shutting down.
    2016-08-04 12:50:41.409507|INFO    |VirtualServer |1  |listening on xx.xxx.xxx.xx:9987
    2016-08-04 12:54:47.000880|INFO    |VirtualServerBase|1  |stopped
    
    2016-08-04 12:54:50.138279|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-04 12:54:50.138514|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #31337 r302002: Sat Jun 18 06:35:37 CEST 2016     [email protected]:/usr/obj/usr/src/sys/NORSE  amd64 Binary: 64bit
    2016-08-04 12:54:50.139070|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-04 12:54:50.139196|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-04 12:54:50.139574|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-04 12:54:50.361803|INFO    |Accounting    |   |Licensing Information
    2016-08-04 12:54:50.361904|INFO    |Accounting    |   |type              : Non-profit
    2016-08-04 12:54:50.362376|INFO    |Accounting    |   |starting date     : Wed Jun  1 00:00:00 2016
    2016-08-04 12:54:50.362455|INFO    |Accounting    |   |ending date       : Mon Dec  5 00:00:00 2016
    2016-08-04 12:54:50.362514|INFO    |Accounting    |   |max virtualservers: 10
    2016-08-04 12:54:50.362564|INFO    |Accounting    |   |max slots         : 512
    2016-08-04 12:54:51.002799|INFO    |              |   |Puzzle precompute time: 601
    2016-08-04 12:54:51.003438|INFO    |FileManager   |   |listening on xx.xxx.xxx.xx:30033, 2a00:xxxx:xxxx::2:30033
    2016-08-04 12:54:51.047217|INFO    |CIDRManager   |   |updated query_ip_blacklist ips: xx.xx.xx.xx/32,  
    2016-08-04 12:54:51.047283|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, xx.xxx.xxx.xx/32, xx.xx.xxx.xxx/32, xx.xx.xxx.0/19, 
    2016-08-04 12:54:51.047403|INFO    |Query         |   |listening on xx.xxx.xxx.xx:10011
    2016-08-04 12:54:51.046955|INFO    |VirtualServer |1  |listening on xx.xxx.xxx.xx:9987, 2a00:xxxx:xxxx::2:9987
    Check your ts3server.ini, you don't have any ts3server.ini?

    Code:
    ./ts3server createinifile=1
    Code:
    vi ts3server.ini
    Code:
    vi ts3server_startscript.sh
    Replace
    Code:
    COMMANDLINE_PARAMETERS="${2}"
    With
    Code:
    COMMANDLINE_PARAMETERS="${2} inifile=ts3server.ini"
    Code:
    ./ts3server_startscript.sh
    Regards,

    Setech.
    Last edited by setech; August 6th, 2016 at 08:03 AM.

  9. #9
    Join Date
    December 2009
    Location
    Portugal
    Posts
    492
    Hi guys

    Did you change anything in the tsdns behavior also? I dont see anything about it in the patch notes, but mine definatelly didnt like the update.

    tsdns_settings.ini
    Code:
    name.x.tld=name.y.tld:9999
    *=name.x.tld:$PORT
    ./tsdnsserver
    Code:
    Warning, invalid ident=value pair in tsdns_settings.ini:1
      invalid ipv4 address
      Offending line: name.x.tld=name.y.tld:9999
    Warning, invalid ident=value pair in tsdns_settings.ini:2
      invalid ipv4 address
      Offending line: *=name.x.tld:$PORT
    I had to change it to dns=ip: port to make it work, but that breaks my setup.

    SRV fix soon?

    BR

  10. #10
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,319
    Use old TSDNS server? TS3 and TSDNS have nothing to do with each other so you can mix them freely.

    And yes, something was changed. The TSDNS server got significantly bigger. Guess it's IPv6.

  11. #11
    Join Date
    December 2009
    Location
    Portugal
    Posts
    492
    Yes, i did revert to the previous tsdns version

    I was just wondering if this behavior was intended or not...

  12. #12
    Join Date
    August 2016
    Posts
    3
    Quote Originally Posted by setech View Post
    Full changelog below:
    Code:
    === Server Release 3.0.13  1 august 2016
     .....
      - binding voice to the any address (0.0.0.0 / 0::0), which is the default behaviour of the server,
        now supports clients connecting to all addresses instead of just the default ip of the network interface.
     .....
    Code:
    2016-08-04 12:50:00.041452|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-04 12:50:00.043013|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #31337 r302002: Sat Jun 18 06:35:37 CEST 2016     [email protected]:/usr/obj/usr/src/sys/NORSE  amd64 Binary: 64bit
    2016-08-04 12:50:00.043762|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-04 12:50:00.043884|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-04 12:50:00.044328|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-04 12:50:00.059739|INFO    |SQL           |   |database updated successfully to revision: 25
    2016-08-04 12:50:00.261999|INFO    |Accounting    |   |Licensing Information
    2016-08-04 12:50:00.262106|INFO    |Accounting    |   |type              : Non-profit
    2016-08-04 12:50:00.262524|INFO    |Accounting    |   |starting date     : Wed Jun  1 00:00:00 2016
    2016-08-04 12:50:00.262595|INFO    |Accounting    |   |ending date       : Mon Dec  5 00:00:00 2016
    2016-08-04 12:50:00.262648|INFO    |Accounting    |   |max virtualservers: 10
    2016-08-04 12:50:00.262694|INFO    |Accounting    |   |max slots         : 512
    2016-08-04 12:50:00.294260|INFO    |DatabaseQuery |   |database busy, waiting for finishing index tasks, may take some time!
    2016-08-04 12:50:41.302446|INFO    |              |   |Puzzle precompute time: 605
    2016-08-04 12:50:41.348107|INFO    |FileManager   |   |listening on xx.xxx.xxx.xx:30033
    2016-08-04 12:50:41.409735|INFO    |CIDRManager   |   |updated query_ip_blacklist ips: xx.xx.xx.xx/32, 
    2016-08-04 12:50:41.409792|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, xx.xxx.xxx.xx/32, xx.xx.xxx.xxx/32, xx.xx.xxx.0/19, 
    2016-08-04 12:50:41.409908|INFO    |Query         |   |listening on xx.xxx.xxx.xx:10011
    2016-08-04 12:54:46.944866|INFO    |ServerMain    |   |Received signal SIGTERM, shutting down.
    2016-08-04 12:50:41.409507|INFO    |VirtualServer |1  |listening on xx.xxx.xxx.xx:9987
    2016-08-04 12:54:47.000880|INFO    |VirtualServerBase|1  |stopped
    
    2016-08-04 12:54:50.138279|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-04 12:54:50.138514|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #31337 r302002: Sat Jun 18 06:35:37 CEST 2016     [email protected]:/usr/obj/usr/src/sys/NORSE  amd64 Binary: 64bit
    2016-08-04 12:54:50.139070|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-04 12:54:50.139196|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-04 12:54:50.139574|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-04 12:54:50.361803|INFO    |Accounting    |   |Licensing Information
    2016-08-04 12:54:50.361904|INFO    |Accounting    |   |type              : Non-profit
    2016-08-04 12:54:50.362376|INFO    |Accounting    |   |starting date     : Wed Jun  1 00:00:00 2016
    2016-08-04 12:54:50.362455|INFO    |Accounting    |   |ending date       : Mon Dec  5 00:00:00 2016
    2016-08-04 12:54:50.362514|INFO    |Accounting    |   |max virtualservers: 10
    2016-08-04 12:54:50.362564|INFO    |Accounting    |   |max slots         : 512
    2016-08-04 12:54:51.002799|INFO    |              |   |Puzzle precompute time: 601
    2016-08-04 12:54:51.003438|INFO    |FileManager   |   |listening on xx.xxx.xxx.xx:30033, 2a00:xxxx:xxxx::2:30033
    2016-08-04 12:54:51.047217|INFO    |CIDRManager   |   |updated query_ip_blacklist ips: xx.xx.xx.xx/32,  
    2016-08-04 12:54:51.047283|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, xx.xxx.xxx.xx/32, xx.xx.xxx.xxx/32, xx.xx.xxx.0/19, 
    2016-08-04 12:54:51.047403|INFO    |Query         |   |listening on xx.xxx.xxx.xx:10011
    2016-08-04 12:54:51.046955|INFO    |VirtualServer |1  |listening on xx.xxx.xxx.xx:9987, 2a00:xxxx:xxxx::2:9987
    Check your ts3server.ini, you don't have any ts3server.ini?

    Code:
    ./ts3server createinifile=1
    Code:
    vi ts3server.ini
    Code:
    vi ts3server_startscript.sh
    Replace
    Code:
    COMMANDLINE_PARAMETERS="${2}"
    With
    Code:
    COMMANDLINE_PARAMETERS="${2} inifile=ts3server.ini"
    Code:
    ./ts3server_startscript.sh
    Regards,

    Setech.
    Thanks for this, adding voice_ip=0.0.0.0 and filetransfer_ip=0.0.0.0 fixed the issue.

  13. #13
    Join Date
    December 2009
    Location
    Portugal
    Posts
    492
    Just realized that the 2 viewers that i have are not working properly anymore (most of the time), also after this update.

    Sometimes they connect and show the client/channel tree just fine, others just trow a generic error.

    the _0.log shows multiple lines like this:
    Code:
    2016-08-06 19:03:03.395958|ERROR   |              |   |error writing tcp socket Connection reset by peer

  14. #14
    Join Date
    September 2012
    Posts
    6,061
    Quote Originally Posted by Ultima View Post
    I have ipv6 explicitly disabled, The server expects ipv6 support regardless and fails to boot.
    Code:
    2016-08-06 03:43:20.380204|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13 (2016-07-19 12:06:50)
    2016-08-06 03:43:20.380950|INFO    |ServerLibPriv |   |SystemInformation: FreeBSD 12.0-CURRENT FreeBSD 12.0-CURRENT #20 r303746: Thu Aug  4 12:33:16 EDT 2016     [email protected]:/usr/src/head/obj/usr/src/head/src/sys/MYKERNEL-NODEBUG amd64 Binary: 64bit
    2016-08-06 03:43:20.382119|INFO    |DatabaseQuery |   |dbPlugin name:    SQLite3 plugin, Version 3, (c)TeamSpeak Systems GmbH
    2016-08-06 03:43:20.382183|INFO    |DatabaseQuery |   |dbPlugin version: 3.11.1
    2016-08-06 03:43:20.382631|INFO    |DatabaseQuery |   |checking database integrity (may take a while)
    2016-08-06 03:43:20.400783|WARNING |Accounting    |   |Unable to find valid license key, falling back to limited functionality
    2016-08-06 03:43:22.029682|INFO    |              |   |Puzzle precompute time: 1050
    2016-08-06 03:43:22.030462|ERROR   |FileManager   |   |bind failed on :::30033; reason: Protocol not supported
    2016-08-06 03:43:22.030532|ERROR   |FileManager   |   |filetransfer bind failed on :::30033; reason: Protocol not supported
    2016-08-06 03:43:22.030598|CRITICAL|VirtualSvrMgr |   |Could not start file manager 258 no network port available
    And my apologies about FreeBSD 11, my issue seems to be unrelated to the versioning. By any chance, is there a link to a lists of all the command line args for ts3server? I found a link that shows them, however it did not come from the teamspeak domain so I'm fairly certain the accuracy would be off especially with a new release.
    It looks like the server didn't even try IPv4, could you please post your ifconfig results (do not obfuscate please - if you feel uncomfortable posting it publicly, send it to me in a PM)?

    Quote Originally Posted by Jonybat View Post
    Code:
    Warning, invalid ident=value pair in tsdns_settings.ini:1
      invalid ipv4 address
      Offending line: name.x.tld=name.y.tld:9999
    Warning, invalid ident=value pair in tsdns_settings.ini:2
      invalid ipv4 address
      Offending line: *=name.x.tld:$PORT
    I had to change it to dns=ip: port to make it work, but that breaks my setup.
    TSDNS was always supposed to return proper IP addresses, it's probably enforced now due to some other change. In any case may I ask what kind of setup you have that breaks now?

    Quote Originally Posted by Jonybat View Post
    Just realized that the 2 viewers that i have are not working properly anymore (most of the time), also after this update.

    Sometimes they connect and show the client/channel tree just fine, others just trow a generic error.

    the _0.log shows multiple lines like this:
    Code:
    2016-08-06 19:03:03.395958|ERROR   |              |   |error writing tcp socket Connection reset by peer
    The error indicates the connection was closed by the other party. Maybe the service had problems / needs to adapt to the new server version. There have been changes in query too (like IPv6 and the no_delay option).
    When sending PMs please make sure to include a reference link to the thread in question in the body of your message.

  15. #15
    Join Date
    December 2009
    Location
    Portugal
    Posts
    492
    Quote Originally Posted by Chris View Post
    TSDNS was always supposed to return proper IP addresses, it's probably enforced now due to some other change. In any case may I ask what kind of setup you have that breaks now?
    I wrote an example of the tsdns settings file in my other post. The issue is that my servers are hosted on dynamic ips. By enforcing the need for ips in the config it means that i will need to have a script that updates the config based on the current ip. I know it is my problem, but it breaks something that used to work nonetheless.

    Quote Originally Posted by Chris View Post
    The error indicates the connection was closed by the other party. Maybe the service had problems / needs to adapt to the new server version. There have been changes in query too (like IPv6 and the no_delay option).
    I know it was something that changed with this update. Was just asking because it might have been a bug

    Is there anything that i can change from the server side to get the old behavior, while waiting for the viewers code to be updated?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Discussion] TeamSpeak 3 Server 3.0.12.*
    By Dream in forum Suggestions and Feedback
    Replies: 7
    Last Post: April 5th, 2016, 10:18 PM
  2. Replies: 20
    Last Post: June 21st, 2012, 10:56 AM
  3. Replies: 9
    Last Post: April 23rd, 2012, 07:12 AM
  4. Replies: 31
    Last Post: March 19th, 2012, 02:07 PM
  5. Replies: 31
    Last Post: February 17th, 2012, 04:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •