[Discussion] TeamSpeak 3 Server 3.0.13

**Jonybat** · September 4th, 2016, 09:02 PM

Weekly update...

Keeps crashing. Updated this morning to .4, crashed in the afternoon.

Full log
http://pastebin.com/uM9qKnzq

**Sebi94** · September 4th, 2016, 11:25 PM

@Jonybat: You're getting this error every single minute. You may get more details about this error, if you would debug it.

Instead of using the ts3server_minimal_startscript.sh / ts3server_startscript.sh, stop your server and start it using gdb:

Code:

export LD_LIBRARY_PATH=".:$LD_LIBRARY_PATH"
gdb ts3server

Then you should see the gdb prompt like "(gdb)". Enter one of the following commands:

Code:

run -x start

...or if you need to use a ts3server.ini:

Code:

run -x start inifile=ts3server.ini

Your server should be started now. Due of that fact, that you're receiving the error messages every minute, I would suggest to wait 2-3 minutes.

After this time, you can ask for it's backtrace:

Code:

backtrace

...or simply:

Code:

bt

The error message is at least fatal, as you can read on Stackoverflow: http://stackoverflow.com/questions/1...t-by-peer-mean

Does your logs contain anything interesting regarding this issue? The dmesg, kern.log or syslog log especially?

**Jonybat** · September 4th, 2016, 11:54 PM

Thank you very much for the reply. Finally something I can work with. I will give it a go as soon as i have a chance.

And no, none of the system logs show anything. Both the crashes and the "connection reset by peer" errors only started with this server version.

Thanks again

**numma_cway** · September 5th, 2016, 12:38 AM

Originally Posted by numma_cway

If this is related to avatars, someone could implement this algorithm in JS, so you know whose avatar should be deleted.
I'm too lazy to do it now, maybe I do it later.

Here it is: JavaScript Avatar Filename Tool.
Converts between client_unique_identifier and client_base64HashClientUID, also known as the avatar filename.
So if an avatar is missing, you can now find out whose and use YaTQA to delete that person's avatar. I might add such feature to YaTQA as well.

**Marvman** · September 9th, 2016, 02:26 PM

Hallo,

i get this from the serverlog

PHP Code:


2016-09-09 12:22:19.644367|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13.4 (2016-08-29 12:39:04)

2016-09-09 12:22:19.644534|INFO    |ServerLibPriv |   |SystemInformation: Linux 2.6.32-028stab101.1 #1 SMP Sun Jun 24 19:50:48 MSD 2012 x86_64 Binary: 64bit

2016-09-09 12:22:19.644567|WARNING |ServerLibPriv |   |The system locale is set to "C" this can cause unexpected behavior. We advice you to repair your locale!

2016-09-09 12:22:19.645564|ERROR   |DatabaseQuery |   |Failed to import "ts3dbplugin_shortname" from "libts3db_sqlite3.so"

2016-09-09 12:22:19.645601|ERROR   |DatabaseQuery |   |Failed to import "ts3dbplugin_apiversion" from "libts3db_sqlite3.so"

2016-09-09 12:22:19.645619|CRITICAL|DatabaseQuery |   |Could not load database plugin

what i have to do to fix the problem ??

**Chris** · September 9th, 2016, 02:32 PM

Originally Posted by Marvman

Hallo,

i get this from the serverlog

PHP Code:


2016-09-09 12:22:19.644367|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13.4 (2016-08-29 12:39:04)
2016-09-09 12:22:19.644534|INFO    |ServerLibPriv |   |SystemInformation: Linux 2.6.32-028stab101.1 #1 SMP Sun Jun 24 19:50:48 MSD 2012 x86_64 Binary: 64bit
2016-09-09 12:22:19.644567|WARNING |ServerLibPriv |   |The system locale is set to "C" this can cause unexpected behavior. We advice you to repair your locale!
2016-09-09 12:22:19.645564|ERROR   |DatabaseQuery |   |Failed to import "ts3dbplugin_shortname" from "libts3db_sqlite3.so"
2016-09-09 12:22:19.645601|ERROR   |DatabaseQuery |   |Failed to import "ts3dbplugin_apiversion" from "libts3db_sqlite3.so"
2016-09-09 12:22:19.645619|CRITICAL|DatabaseQuery |   |Could not load database plugin

what i have to do to fix the problem ??

you failed to update all the files. the libts3db_sqlite3.so is out of date.

Code:

sha1sum teamspeak3-server_linux_x86/libts3db_sqlite3.so
dfcee3b452bf5bc6183b8e472e3ff8d32a2c8014  teamspeak3-server_linux_x86/libts3db_sqlite3.so

**Marvman** · September 9th, 2016, 02:47 PM

Originally Posted by Chris

you failed to update all the files. the libts3db_sqlite3.so is out of date.

Code:

sha1sum teamspeak3-server_linux_x86/libts3db_sqlite3.so
dfcee3b452bf5bc6183b8e472e3ff8d32a2c8014  teamspeak3-server_linux_x86/libts3db_sqlite3.so

THX a lot .... now its fixed and working

**VJean** · September 9th, 2016, 09:55 PM

crash server 3.0.13.4 (7 sep)

Code:

2016-09-09 19:15:32.443604|CRITICAL|DatabaseQuery |   |setSQLfromFile( file:sql/update_27.sql) failed

**dante696** · September 9th, 2016, 11:21 PM

Which server version was running before youb did the update?
Are you sure you did overwrite all files from the server package?

**VJean** · September 10th, 2016, 03:02 AM

Originally Posted by dante696

Which server version was running before youb did the update?
Are you sure you did overwrite all files from the server package?

probably 3.0.13.3. Bug report not mine, I will ask the user.

I'm check all archives in http://dl.4players.de/ts/releases/pr...0.13.4-Beta-1/ and http://dl.4players.de/ts/releases/3.0.13.4/
File update_27.sql not exists in all.

in 3.0.13.4 latest file: update_26.sql
in 3.0.13.3: update_25.sql

How could take references update 27? This value db shema version is hardcored in the server code.

**Jonybat** · September 10th, 2016, 11:28 AM

I've run it with gdb and killed it after about 5 minutes, here is the full output:

http://pastebin.com/h1bNNd38

@VJean
I updated my server to .4 pre and didnt have any issues. I havent updated to .4 final yet, because it seems to be the same as the beta version.

**Sebi94** · September 10th, 2016, 03:15 PM

Thanks, @Jonybat!

I've just copy & paste it here.

Code:

(gdb) run -x start inifile=ts3server.ini.mariadb
Starting program: /opt/teamspeak3-server/ts3server -x start inifile=ts3server.ini.mariadb
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
2016-09-10 09:10:28.462761|INFO    |ServerLibPriv |   |TeamSpeak 3 Server 3.0.13.4 (2016-08-29 12:39:04)
2016-09-10 09:10:28.463299|INFO    |ServerLibPriv |   |SystemInformation: Linux 3.16.0-77-generic #99~14.04.1-Ubuntu SMP Tue Jun 28 19:17:10 UTC 2016 x86_64 Binary: 64bit
[New Thread 0x7ffff7fe4700 (LWP 27913)]
2016-09-10 09:10:28.587485|INFO    |DatabaseQuery |   |dbPlugin name:    MariaDB plugin, version 3, (c)TeamSpeak Systems GmbH
2016-09-10 09:10:28.589065|INFO    |DatabaseQuery |   |dbPlugin version: 2
[New Thread 0x7ffff66c9700 (LWP 27920)]
[New Thread 0x7ffff5ec8700 (LWP 27921)]
[New Thread 0x7ffff56c7700 (LWP 27922)]
[New Thread 0x7ffff4ec6700 (LWP 27923)]
[New Thread 0x7fffe7fff700 (LWP 27924)]
[New Thread 0x7fffe77fe700 (LWP 27932)]
[Thread 0x7fffe77fe700 (LWP 27932) exited]
2016-09-10 09:10:29.295217|INFO    |Accounting    |   |Licensing Information
2016-09-10 09:10:29.295425|INFO    |Accounting    |   |type              : Non-profit
2016-09-10 09:10:29.295519|INFO    |Accounting    |   |starting date     : Sat Jun 18 00:00:00 2016
2016-09-10 09:10:29.295596|INFO    |Accounting    |   |ending date       : Wed Dec 21 00:00:00 2016
2016-09-10 09:10:29.295666|INFO    |Accounting    |   |max virtualservers: 10
2016-09-10 09:10:29.295733|INFO    |Accounting    |   |max slots         : 512
[New Thread 0x7fffe6ffd700 (LWP 27939)]
[New Thread 0x7fffe6efc700 (LWP 27940)]
[New Thread 0x7fffe77fe700 (LWP 27949)]
[New Thread 0x7fffe6ae4700 (LWP 27950)]
[Thread 0x7fffe6ae4700 (LWP 27950) exited]
2016-09-10 09:10:32.149018|INFO    |              |   |Puzzle precompute time: 2422
[Thread 0x7fffe77fe700 (LWP 27949) exited]
[New Thread 0x7fffe62e3700 (LWP 27986)]
2016-09-10 09:10:32.152261|INFO    |FileManager   |   |listening on 0.0.0.0:30033
[New Thread 0x7fffe6ae4700 (LWP 27987)]
[New Thread 0x7fffe77fe700 (LWP 27988)]
[New Thread 0x7fffe61e2700 (LWP 27989)]
[New Thread 0x7fffe59e1700 (LWP 27992)]
[New Thread 0x7fffe58e0700 (LWP 27994)]
2016-09-10 09:10:32.321114|WARNING |PermGroupMgr  |1  |cldbid: 2, assigned to unknown gid: 2, ignoring!
2016-09-10 09:10:32.440414|INFO    |VirtualServer |1  |listening on 0.0.0.0:9987
2016-09-10 09:10:32.552313|INFO    |VirtualServer |3  |listening on 0.0.0.0:9989
2016-09-10 09:10:32.553619|INFO    |CIDRManager   |   |updated query_ip_blacklist ips: 37.59.31.160/32,
2016-09-10 09:10:32.554219|INFO    |CIDRManager   |   |updated query_ip_whitelist ips: 127.0.0.1/32, 192.168.0.0/24, 94.23.235.222/32,
[New Thread 0x7fffe50df700 (LWP 28009)]
[New Thread 0x7fffe48de700 (LWP 28010)]
2016-09-10 09:10:32.560673|INFO    |Query         |   |listening on 0.0.0.0:10011
[New Thread 0x7fffbffff700 (LWP 28012)]
2016-09-10 09:10:33.002351|INFO    |VirtualServerBase|3  |client connected 'www'(id:18) from 5.249.www.www:63119
[Thread 0x7fffbffff700 (LWP 28012) exited]
2016-09-10 09:10:33.093566|INFO    |VirtualServerBase|1  |client connected 'xxx'(id:2) from 5.249.xxx.xxx:40641
2016-09-10 09:10:33.664130|INFO    |VirtualServerBase|3  |client connected 'yyy'(id:1274) from 85.76.yyy.yyy:64021
2016-09-10 09:11:03.549128|INFO    |VirtualServerBase|3  |client connected 'zzz'(id:2022) from 84.248.zzz.zzz:62135

2016-09-10 09:12:01.745506|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:59617'(id:1964)
2016-09-10 09:12:01.792785|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:59617'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 09:12:06.857449|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:59633'(id:1964)
2016-09-10 09:12:06.903307|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:59633'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 09:14:03.165130|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:59882'(id:1964)
2016-09-10 09:14:03.213207|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:59882'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 09:14:08.282314|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:59901'(id:1964)
2016-09-10 09:14:08.333768|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:59901'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 09:14:19.374985|INFO    |VirtualServer |1  |query client connected 'Unknown from 94.23.235.222:58312'(id:1965)
2016-09-10 09:14:19.555007|INFO    |VirtualServerBase|1  |query client disconnected 'Unknown from 94.23.235.222:58312'(id:1965) reason 'reasonmsg=disconnecting'
^C
Program received signal SIGINT, Interrupt.
[email protected]@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
185     ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: No such file or directory.
(gdb) bt
#0  [email protected]@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1  0x000000000040be1f in ?? ()
#2  0x000000000040b904 in ?? ()
#3  0x00007ffff7106f45 in __libc_start_main (main=0x40b850, argc=4, argv=0x7fffffffe4d8, init=<optimized out>,
    fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffe4c8) at libc-start.c:287
#4  0x000000000040b269 in ?? ()
#5  0x00007fffffffe4c8 in ?? ()
#6  0x000000000000001c in ?? ()
#7  0x0000000000000004 in ?? ()
#8  0x00007fffffffe732 in ?? ()
#9  0x00007fffffffe753 in ?? ()
#10 0x00007fffffffe756 in ?? ()
#11 0x00007fffffffe75c in ?? ()
#12 0x0000000000000000 in ?? ()

First of all, you may should fix this "warning":

2016-09-10 09:10:32.321114|WARNING |PermGroupMgr |1 |cldbid: 2, assigned to unknown gid: 2, ignoring!

You've killed your server using Ctrl + C, so this should be normal:

^C
Program received signal SIGINT, Interrupt.
[email protected]@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
185 ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: No such file or directory.

@ScP: No such file or directory shouldn't appear, also if the server has been killed, or?

(gdb) bt
#0 [email protected]@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1 0x000000000040be1f in ?? ()
#2 0x000000000040b904 in ?? ()
#3 0x00007ffff7106f45 in __libc_start_main (main=0x40b850, argc=4, argv=0x7fffffffe4d8, init=<optimized out>,
fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffe4c8) at libc-start.c:287

If there is any error or not, needs to be checked by a TeamSpeak developer. I don't think, that it's one.

However, the server didn't crashed as expected.

2016-09-04 15:27:03.795038|ERROR | | |error writing tcp socket Connection reset by peer

The backtrace (bt) should include information regarding the crash, but unfortunately, the server didn't crashed - instead, you've just stopped it.

Well... It's not useful at all, even if your "no such file" error is an real error, which needs to be fixed too.

**Jonybat** · September 10th, 2016, 03:46 PM

Thanks again for the reply.

Like i said before, i dont think that the "tcp socket errors" are related to the crashes. I get those errors every minute, but the server crashes are random (something between twice every day and once every week). These errors are probably related to another issue that i reported before:

Originally Posted by Jonybat

Just realized that the 2 viewers that i have are not working properly anymore (most of the time), also after this update.

Sometimes they connect and show the client/channel tree just fine, others just trow a generic error.

the _0.log shows multiple lines like this:

Code:

2016-08-06 19:03:03.395958|ERROR   |              |   |error writing tcp socket Connection reset by peer

I didnt realize that those errors were not showing up in that log output, they only started after about 30 minutes. Here are the last lines after starting it this morning:

Code:

(...)
2016-09-10 13:28:40.982000|INFO    |VirtualServer |3  |query client connected 'Unknown from 174.36.245.59:57950'(id:1964)
2016-09-10 13:28:41.535368|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 174.36.245.59:57950'(id:1964) reason 'reasonmsg=connection lost'
2016-09-10 13:29:03.654910|ERROR   |              |   |error writing tcp socket Connection reset by peer
2016-09-10 13:30:02.035962|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:33889'(id:1964)
2016-09-10 13:30:02.085096|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:33889'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 13:30:03.757506|ERROR   |              |   |error writing tcp socket Connection reset by peer
2016-09-10 13:30:07.150649|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:33903'(id:1964)
2016-09-10 13:30:07.206232|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:33903'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 13:31:03.080397|ERROR   |              |   |error writing tcp socket Connection reset by peer
2016-09-10 13:32:01.243731|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:34105'(id:1964)
2016-09-10 13:32:01.295817|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:34105'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 13:32:02.985304|ERROR   |              |   |error writing tcp socket Connection reset by peer
2016-09-10 13:32:06.356268|INFO    |VirtualServer |3  |query client connected 'Unknown from 127.0.0.1:34115'(id:1964)
2016-09-10 13:32:06.410140|INFO    |VirtualServerBase|3  |query client disconnected 'Unknown from 127.0.0.1:34115'(id:1964) reason 'reasonmsg=deselected virtualserver'
2016-09-10 13:32:35.591990|INFO    |VirtualServer |1  |query client connected 'Unknown from 94.23.235.222:9374'(id:1965)
2016-09-10 13:32:35.779973|INFO    |VirtualServerBase|1  |query client disconnected 'Unknown from 94.23.235.222:9374'(id:1965) reason 'reasonmsg=disconnecting'
2016-09-10 13:33:03.113074|ERROR   |              |   |error writing tcp socket Connection reset by peer

^C
Program received signal SIGINT, Interrupt.
[email protected]@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
185     ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: No such file or directory.
(gdb) bt
#0  [email protected]@GLIBC_2.3.2 () at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
#1  0x000000000040be1f in ?? ()
#2  0x000000000040b904 in ?? ()
#3  0x00007ffff7106f45 in __libc_start_main (main=0x40b850, argc=4, argv=0x7fffffffdf88, init=<optimized out>,
    fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffdf78) at libc-start.c:287
#4  0x000000000040b269 in ?? ()
#5  0x00007fffffffdf78 in ?? ()
#6  0x000000000000001c in ?? ()
#7  0x0000000000000004 in ?? ()
#8  0x00007fffffffe1f2 in ?? ()
#9  0x00007fffffffe213 in ?? ()
#10 0x00007fffffffe216 in ?? ()
#11 0x00007fffffffe21c in ?? ()
#12 0x0000000000000000 in ?? ()

I've left it running with gdb in the background and ill post back the backtrace once it crashes.

**numma_cway** · September 10th, 2016, 07:27 PM

Originally Posted by VJean

How could take references update 27? This value db shema version is hardcored in the server code.

http://forum.teamspeak.com/threads/1...815#post433815

**Jonybat** · September 24th, 2016, 01:58 PM

Update...

I don't want to jinx it, but it hasn't crashed since the 10th. The tcp socket errors are gone and both web viewers are working perfectly.

The only thing I did was fix the cldbid warning. Other than that, it's still running .4 pre, launched with gdb. Nothing else was changed is the server, not even a software update.

The only log entries out of the ordinary now are these 2 (one occurrence):

Code:

2016-09-21 01:21:03.966826|ERROR   |              |   |TS3ANetwork::Connect failed error: 110
2016-09-21 01:21:03.995055|ERROR   |              |   |Unable to connect to primary address, trying secondary

And about a dozen of those "no such file or dir" errors for icons and avatars, that I'll look into.

Pretty clueless about what happened, but at least it seems to be over. Just hope it doesn't come back.

Forum

Notice to all users

Thread: [Discussion] TeamSpeak 3 Server 3.0.13

Thread Tools

Display

TS3 Server wont start after update

Thread Information

Users Browsing this Thread

Similar Threads

[Discussion] TeamSpeak 3 Server 3.0.12.*

TeamSpeak 3 Server 3.0.6 Pre-Release Discussion

TeamSpeak 3 Server 3.0.5 Pre-Release Discussion

TeamSpeak 3 Server 3.0.2 Release Discussion

TeamSpeak 3 Server 3.0.1 Release Discussion

Posting Permissions