Forum

Results 1 to 4 of 4
  1. #1
    Join Date
    March 2015
    Posts
    2

    Post How to find out current port and change it?

    I am connecting to my TS3 Server using the ip 123.123.123.123:9020 (example). This is not the default port.
    But when I open the "ts3server.ini" it says:
    default_voice_port=9987
    How is it possible?

    Any admin command to check the current port and change it?
    Last edited by maykoo; October 23rd, 2016 at 01:00 AM.

  2. #2
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,371
    Default port is the port when no server exists and therefore a new one (usually the first one) is created. If you have a server, use query. See the manual. Commands are use, serveredit, serverstop and serverstart.

  3. #3
    Join Date
    March 2015
    Posts
    2
    How to find out the currently set port of a teamspeak server using commands?
    And what is the command to change that port?

  4. #4
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,371
    If you are connecting via 123.123.123.123:9020, 9020 is obviously the port.
    Redirects to custom ports must bei done with SRV records. They are not that easy to use as they must point to an A or AAAA record. While TeamSpeak 3.0 accepts IPs as well, 3.1 does not.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Windows Server 2008 TS3 port redirect problem
    By Batyesz in forum Windows
    Replies: 7
    Last Post: September 23rd, 2013, 10:02 PM
  2. Teamspeak 3 Server Subdomain Redirect
    By Zarathos in forum Server Support
    Replies: 5
    Last Post: April 23rd, 2012, 03:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •