[Discussion] TeamSpeak 3 Server 3.2.0

[dante696]

This thread can be used for feedback and discussion about the 3.2.0 release of the TeamSpeak server. The change log can be found see the announcement.

[Mezir]

How to name a channel to display an emoticon on it?

[dante696]

Choose a 😈 and set into the channel name.

[Mezir]

Thanks. Where can I find the full list of emoticons that I can use?

It would be nice if it was possible to create your own emoji.
Example:
We put our own emoji into the folder:
files/virtualserver_1/internal/emoticons
Then edit the file emoticons.txt and add your own emoji, which we can later use on the server.

[dante696]

Thanks. Where can I find the full list of emoticons that I can use?

You find such lists on Google. Just search for Emoji and your first results will be lists.

It would be nice if it was possible to create your own emoji.
Example:
We put our own emoji into the folder:
files/virtualserver_1/internal/emoticons
Then edit the file emoticons.txt and add your own emoji, which we can later use on the server.

Own emojis are no standard so channel icons is the place where your custom emoji belongs into.


Edit
Following posts with Emoji requests where moved to https://forum.teamspeak.com/threads/135160
These have nothing to do with server release 3.2.0.

And yes we know how important these Emojis are nowadays. That's all i can say for the moment.

[FireEmerald]

Just as an example:

1. Goto emojipedia.org and click onto an emoticon.
2. Then copy it using the [Copy] button and paste the copied emoticon into a channel description.

Note that you can't use a single emoticon as nickname due to fact that a nickname must contain at least 3 characters (emoticon = 1).


@dante696 Which emoticons are supported by TeamSpeak yet?
Because as an example try to paste this emoticon into the description of a channel and click [Apply]. The icon is only shown in preview/edit mode, but isn't shown after a click onto [Apply].

[numma_cway]

Quoting myself:

What TeamSpeak supports of SMP (or outside of BMP in general) is this:

• U+1F1E6–U+1F1FF country code part of Enclosed Alphanumeric Supplement
• U+1F300–U+1F5FF Miscellaneous Symbols and Pictographs
• U+1F600–U+1F64F Emoticons
• U+1F680–U+1F6FF Transport and Map Symbols
• U+1F900–U+1F9FF Supplemental Symbols and Pictographs

That's most of the emoji space. There are some more emojis from the alphanum emoji category in the rest of the first block (U+1F100–U+1F1FF) in the list above of which TeamSpeak supports only the mentioned 10%.

[dante696]

These are not all supported Emojis.
Also supported are range

U+02600 - U+026FF
U+02700 - 027BF
U+0FE00 - U+0FE0F

Here is the official list with supported Emojis for server 3.2.0:

• All Emojois up to number 1610 from https://unicode.org/emoji/charts/full-emoji-list.html
• All Emojois from https://www.compart.com/en/unicode/block/U+2600
• All Emojois from https://www.compart.com/en/unicode/block/U+2700

[numma_cway]

I said "SMP" and "outside of BMP".

TeamSpeak supports the entire BMP (number of up to 4 digits) with the following exceptions:

• U+0–U+8
  U+B–U+C
  U+E–U+1F
  U+7F–U+9F
  Control characters
• U+200E–U+200F
  BiDi, though U+061C is included
• U+2028–U+2029
• U+202A–U+202E
  BiDi, though U+2066–U+2069 is included.
• U+FFF9–U+FFFB
  Annotations
• U+FFFC–U+FFFD
  Replacement characters
• U+FFFE–U+FFFF
  not a character

[Felixj57]

Hello,

I had an issue with the latest server versions. I created a new user for my teamspeak server on my Ubuntu server and made all steps like I did in the past. For the license agreement, I created a new file. When I start it (first with the minimal runscript, then with the normal startscript and the flag start), everything worked perfect. But as soon as I disconnect from SSH, the server stopped. I figured out that it keeps running if I do not login with the new account. When I log in as root and switch the user to my teamspeak one, everything works. When I log in as the teamspeak user and do nothing but disconnect again, the server stops again.

It seems like there is a problem since teamspeak updated the system to accept the license agreement. As I saied, I solved the problem by logging in as root and switch to the other user, but I want to let you know about my experience.

Best regards
Felix

[mazeman]

What does this mean? protection agains DDos?

=== Server Release 3.2.0 14 may 2018
Added: In light of the recent attacks that have been discovered, we took a closer look to make sure
we haven't missed anything and prevent some possible future attacks.

[Bluscream]

What does this mean? protection agains DDos?

No, protection against exploits.

[numma_cway]

General speaking, software cannot reliably protect you against DDoS.

[TSRiky]

Something changed to client_icon_id? Just on new version when I call GetClientDatabaseInfo query (by TS3QueryLib.Net) I get exception by casting the null value "Could not cast parameter with name 'client_icon_id' and value '' to target type of 'System.UInt32'". I think with new version the value of client_icon_id return empty

[dante696]

Yes something changed. We removed client_icon_id from ServerQuery command clientdbinfo.
Before server 3.2.0 the value was always 0 and made no sense to show that value at all.