Forum

Results 1 to 12 of 12
  1. #1
    Join Date
    June 2018
    Posts
    15

    Increasing TeamSpeak3 Server Log Storage (Default 7 days)

    Hi All,

    Hope you are healthy and well. I was looking my ts3 server logs and realized it is being recorded 7 days. How can i increase this setting? I have also yatqa.

    Thanks in advance.

    Kind Regards.

  2. #2
    Join Date
    June 2008
    Posts
    18,231
    Default should be 90 days if i remember right (i may have changed this setting )

    start paramter dblogkeepdays=7 can change it to 7 days.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  3. #3
    Join Date
    June 2018
    Posts
    15
    I cooldnt understand how is it 90 days? Let me show you with pictures.

    http://prntscr.com/jxdoe9
    http://prntscr.com/jxdpb7

    As you see in the pictures only 7days logs available.

    You gave a command but i couldnt understand how can i use it? And could you please show me where can i change from this setting?

    Thanks in advance.

    Kind Regards.

  4. #4
    Join Date
    December 2004
    Location
    RF
    Posts
    3,006
    Read the documentation, everything is there.

  5. #5
    Join Date
    June 2008
    Posts
    18,231
    I gave you a start parameter.
    On linux you would start your server (after you did stop it) like this.
    Code:
    ./ts3server_startscript start dblogkeepdays=7
    Edit
    You may have started the server 7 days ago and this created a new server log file. So the server only shows this file.
    By default the server never shows logs that are not in use for this server instance or virtual server.

    You can tell the server to use the same file again on next server start.
    Start parameter logappend=1 (0 is default) whouldchange that.

    Logs would be always ts3server_0.log / ts3server_4.log instead of log files with a time stamp.
    Last edited by dante696; June 21st, 2018 at 11:33 AM.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  6. #6
    Join Date
    June 2018
    Posts
    15
    @dante696

    Thanks for your reply i appreciate you but i am not professional as you in teamaspeak3 server. Could you please tell me how can i modify the logappend setting? I mean, for ex. i connected the teamspeak3 server console. And then?

    Could you please explain me step by step. Or could you please show me a page which that contains this information. I will read it. If you dont want to explain i do not want to tire you.

    Kind Regards.

  7. #7
    Join Date
    June 2008
    Posts
    18,231
    You have to start the server instance with that parameters and these are not permanent settings.
    This can not be done while server is running and these are not saved anywhere when you start the server again without the parameters.

    I gave an example in post#5 how you add such parameter.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  8. #8
    Join Date
    June 2018
    Posts
    15
    Thanks i got it.

  9. #9
    Join Date
    June 2008
    Posts
    18,231
    The ts3server_startscript only accepts he first parameter and ignores the rest.
    So for 2 or more parameters you have to put the parameters into a ts3server.ini file (file needs to be created) and start your server only with parameter inifile=ts3server.ini.

    How to create the ts3server.ini
    It can be done manually or you start the server once with parameter createinifile=1. This creates the file and fills in a lot default values.

    Example:
    Code:
    dblogkeepdays=7
    logpath=logs
    logquerycommands=0
    logappend=1
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

  10. #10
    Join Date
    June 2011
    Location
    Germany
    Posts
    4,365
    I believe you guys are all talking about a feature that was removed in 3.0.1-pre1 (25 Oct 2011).

  11. #11
    Join Date
    June 2018
    Posts
    15
    My server's version is 3.0.12.3 Linux

  12. #12
    Join Date
    June 2008
    Posts
    18,231
    Quote Originally Posted by hasanalizxc View Post
    My server's version is 3.0.12.3 Linux
    Update your server! It's outdated since 2 years!

    Then use the logapend parameter.

    @numma you may be right. I forgot that server did create logs in the database in the beginning.
    When sending me private messages: Please make sure to include reference link to your forum thread or post.

    TeamSpeak FAQ || What should i report, when i open a client thread?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 8
    Last Post: January 23rd, 2012, 11:29 AM
  2. Increasing server slots beyond 32
    By Sgt.Trojan in forum Server Support
    Replies: 3
    Last Post: April 29th, 2011, 11:11 AM
  3. TeamSpeak3 Server Down for Days
    By Desmon in forum Server Support
    Replies: 5
    Last Post: September 12th, 2010, 05:29 PM
  4. TS3 Storage
    By SightUp in forum Suggestions and Feedback
    Replies: 7
    Last Post: December 7th, 2009, 08:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •